We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
20 resultsShowing papers similar to Mechanical Spectroscopy Study of CrNiCoFeMn High-Entropy Alloys
ClearTemperature Dependence of the Deformation Behavior of High-entropy Alloys Co20cr20fe20mn20ni20, Co19cr20fe20mn20ni20с1 and Co17cr20fe20mn20ni20с3. Mechanical Properties and Temperature Dependence of Yield Strength
This study examined how temperature affects the deformation behavior of high-entropy metal alloys, finding that adding carbon significantly changed mechanical properties across a wide temperature range — not related to microplastics.
Temperature Dependence of Mechanical Properties and Plastic Flow Behavior of Cast Multicomponent Alloys Fe20Cr20Mn20Ni20Co20-xCx (x = 0, 1, 3, 5)
This materials science paper examines how carbon additions affect the mechanical properties and deformation behavior of high-entropy metal alloys at temperatures ranging from near absolute zero to room temperature. The paper addresses metallic plasticity at a microscale level and is unrelated to environmental microplastic pollution.
Effects of Adiabatic Heating and Strain Rate on the Dynamic Response of a CoCrFeMnNi High-Entropy Alloy
This materials science study analyzed how a high-entropy metal alloy responds to high-speed compression, including heat buildup at different strain rates. The research is not directly related to microplastics or human health.
A bcc refractory high-entropy alloy: the ideal case of smooth plastic flow
This materials science paper characterizes smooth plastic flow in a body-centered cubic refractory high-entropy alloy, examining dislocation dynamics and deformation mechanisms; it is not directly related to microplastic environmental research.
Effect of Laser Shock Peening on the Microstructure and Properties of the Inconel 625 Surface Layer
Researchers investigated how laser shock peening affects the microstructure and mechanical properties of a high-performance nickel alloy. While unrelated to microplastics directly, understanding metal alloy behavior under stress is relevant to designing durable infrastructure that resists the mechanical wear that generates metal and polymer particles.
Temperature Dependence of the Deformation Behavior of High-Entropy Alloys Co20Cr20Fe20Mn20Ni20, Co19Cr20Fe20Mn20Ni20С1, and Co17Cr20Fe20Mn20Ni20С3. Mechanical Properties and Temperature Dependence of Yield Stress
Not relevant to microplastics — this study examines the mechanical properties and temperature-dependent deformation of high-entropy Cantor alloys doped with carbon, noting 'microplastic deformation' only as a materials science term for sub-yield-stress plastic flow, not as a reference to environmental microplastic pollution.
Mechanical Properties and Fracture Toughness Prediction of Ductile Cast Iron under Thermomechanical Treatment
This paper is not about microplastics. It studied the mechanical properties and fracture toughness of ductile cast iron under different temperatures and strain rates. The term 'plastic deformation' in this context refers to metal bending, not plastic pollution particles.
Effects of Ultra-Low Temperatures on the Mechanical Properties and Microstructure Evolution of a Ni-Co-Based Superalloy Thin Sheet during Micro-Tensile Deformation
This materials science paper examines how ultra-low temperatures affect the mechanical properties and microstructure of a nickel-cobalt superalloy used in aerospace and nuclear applications. The study is focused on extreme-condition materials performance and is unrelated to microplastic research.
An ultra-strong and ductile crystalline-amorphous nanostructured surface layer on TiZrHfTaNb0.2 high-entropy alloy by laser surface processing
Researchers applied laser surface remelting to a TiZrHfTaNb high-entropy alloy and produced a surface layer with a novel crystalline-amorphous nanostructure, finding that this heterogeneous structure provided superior strength and ductility compared to the bulk alloy through cooperative deformation mechanisms.
Damping behavior of 316L lattice structures produced by Selective Laser Melting
Researchers used a metal 3D-printing technique called Selective Laser Melting to produce steel specimens with internal lattice structures and measured how well these structures absorbed vibration (damping capacity). The study found that lattice structures can be engineered to improve energy absorption relative to their weight, relevant to manufacturing and not directly related to microplastics.
Microstructure and High Temperature Tensile Properties of Mg–10Gd–5Y–0.5Zr Alloy after Thermo-Mechanical Processing
This materials science study examined the microstructure and high-temperature properties of a magnesium alloy after thermo-mechanical processing. While focused on metals research, it is not directly related to microplastic or environmental contamination.
Preparation and High‐Temperature Microplastic Forming Performance of Nano‐FeCoNi Medium‐Entropy Alloy Foils
Researchers fabricated nanocrystalline FeCoNi medium-entropy alloy foils using alternating current pulse electrodeposition and characterized their microstructure, crystallographic properties, and mechanical performance. A 45 µm foil was produced and subjected to high-temperature microbulging tests, demonstrating its potential for precision microforming applications at elevated temperatures.
Multiscale hierarchical and heterogeneous mechanical response of additively manufactured novel Al alloy investigated by high-resolution nanoindentation mapping
Researchers used high-resolution nanoscale testing to map the mechanical properties of a new aluminum alloy made by 3D metal printing, revealing how tiny precipitate particles and rapid cooling during printing create regions of dramatically different hardness that affect the alloy's overall strength and performance.
Crack nucleation using combined crystal plasticity modelling, high-resolution digital image correlation and high-resolution electron backscatter diffraction in a superalloy containing non-metallic inclusions under fatigue
This materials engineering study combined crystal plasticity modeling with high-resolution microscopy to understand how fatigue cracks form near non-metallic inclusions in nickel superalloys. The research addresses durability of industrial alloy components and is not related to microplastics research.
Investigation of Fatigue Damage of Tempered Martensitic Steel during High Cycle Fatigue and Very High Cycle Fatigue Loading Using In Situ Monitoring by Scanning Electron Microscope and High‐Resolution Thermography
This study examined how fatigue damage develops in martensitic steel under high-cycle loading, finding that heat treatment conditions affect the material's failure mechanisms. The research is focused on materials engineering and has limited direct relevance to microplastic pollution.
The Microstructure and Properties of Laser Shock Peened CMSX4 Superalloy
This metallurgy study analyzed how laser shock peening—a surface treatment process—affects the microstructure and properties of a nickel-based superalloy used in jet engines. It has no relevance to microplastic or environmental health research.
Hot Deformation Behavior and Processing Maps of a New Ti-6Al-2Nb-2Zr-0.4B Titanium Alloy
This materials science study characterized the high-temperature deformation behavior of a new titanium alloy used in aerospace and industrial applications. It has no direct relevance to microplastic or environmental health research.
Dislocation Arrangements and Cyclic Microplasticity Surrounding Stress Concentration in a Ni‐Based Single‐Crystal Superalloy
Not relevant to microplastics — this materials science study examines dislocation behavior and fatigue crack initiation in nickel-based single-crystal superalloys; 'microplasticity' here refers to microscale metal deformation, not plastic particles.
Characterizing and Modeling Transformation-Induced Plasticity in 13Cr-4Ni Welds upon Cooling
This materials science paper investigates transformation-induced plasticity in martensitic stainless steel welds used in hydraulic turbine manufacturing. The study is focused on metal alloy behavior during cooling and is unrelated to microplastic pollution research.
On Structural Sensitivity of Young’s Modulus of Ni-Rich Ti-Ni Alloy
This study examined how grain size and heat treatment affect Young's modulus in nickel-rich titanium-nickel alloy for bone implant applications. This is a materials science paper focused on biomedical alloys with no direct relevance to microplastics or environmental health.