We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Mechanical Spectroscopy Study of CrNiCoFeMn High-Entropy Alloys
Summary
This study characterized the mechanical properties of a high-entropy alloy manufactured by both conventional induction melting and selective laser melting (3D printing). The research is focused on advanced materials engineering with limited direct relevance to microplastic pollution.
The equiatomic high-entropy alloy of composition of CrNiCoFeMn with an FCC crystal structure was prepared by either induction melting or additive manufacturing with a selective laser melting (SLM) process, starting from mechanically alloyed powders. The as-produced samples of both kinds were cold worked, and in some cases re-crystallized. Unlike induction melting, there is a second phase, which is made of fine nitride and Cr-rich σ phase precipitates, in the as-produced SLM alloy. Young's modulus and damping measurements, as a function of temperature in the 300-800 K range, were performed on the specimens that were cold-worked and/or re-crystallized. Young's modulus values of (140 ± 10) GPa and (90 ± 10) GPa were measured from the resonance frequency of free-clamped bar-shaped samples at 300 K for the induction-melted and SLM samples, respectively. The room temperature values increased to (160 ± 10) GPa and (170 ± 10) GPa for the re-crystallized samples. The damping measurements showed two peaks, which were attributed to dislocation bending and grain-boundary sliding. The peaks were superposed on an increasing temperature background.
Sign in to start a discussion.
More Papers Like This
Temperature Dependence of the Deformation Behavior of High-entropy Alloys Co20cr20fe20mn20ni20, Co19cr20fe20mn20ni20с1 and Co17cr20fe20mn20ni20с3. Mechanical Properties and Temperature Dependence of Yield Strength
This study examined how temperature affects the deformation behavior of high-entropy metal alloys, finding that adding carbon significantly changed mechanical properties across a wide temperature range — not related to microplastics.
Temperature Dependence of Mechanical Properties and Plastic Flow Behavior of Cast Multicomponent Alloys Fe20Cr20Mn20Ni20Co20-xCx (x = 0, 1, 3, 5)
This materials science paper examines how carbon additions affect the mechanical properties and deformation behavior of high-entropy metal alloys at temperatures ranging from near absolute zero to room temperature. The paper addresses metallic plasticity at a microscale level and is unrelated to environmental microplastic pollution.
Effects of Adiabatic Heating and Strain Rate on the Dynamic Response of a CoCrFeMnNi High-Entropy Alloy
This materials science study analyzed how a high-entropy metal alloy responds to high-speed compression, including heat buildup at different strain rates. The research is not directly related to microplastics or human health.
A bcc refractory high-entropy alloy: the ideal case of smooth plastic flow
This materials science paper characterizes smooth plastic flow in a body-centered cubic refractory high-entropy alloy, examining dislocation dynamics and deformation mechanisms; it is not directly related to microplastic environmental research.
Effect of Laser Shock Peening on the Microstructure and Properties of the Inconel 625 Surface Layer
Researchers investigated how laser shock peening affects the microstructure and mechanical properties of a high-performance nickel alloy. While unrelated to microplastics directly, understanding metal alloy behavior under stress is relevant to designing durable infrastructure that resists the mechanical wear that generates metal and polymer particles.