We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
20 resultsShowing papers similar to Coagulation studies on photodegraded and photocatalytically degraded polystyrene microplastics using polyaluminium chloride
ClearNew insights into the fate and interaction mechanisms of hydrolyzed aluminum-titanium species in the removal of aged polystyrene
Researchers investigated the interaction between polyaluminum-titanium chloride composite coagulant species and aged polystyrene microplastics, revealing how species transformation during coagulation affects the removal efficiency of microplastics from water.
The suitability and mechanism of polyaluminum-titanium chloride composite coagulant (PATC) for polystyrene microplastic removal: Structural characterization and theoretical calculation
Researchers developed a new coagulant (a chemical that clumps particles together for removal) that effectively removes polystyrene microplastics from water. The composite coagulant worked better than standard water treatment chemicals across a wider range of water conditions, using hydrogen bonding to capture the plastic particles. This technology could improve drinking water treatment plants' ability to filter out microplastics before water reaches consumers.
Enhanced Removal of Polystyrene Microplastics from Water Through Coagulation Using Polyaluminum Ferric Chloride with Coagulant Aids
Researchers tested enhanced coagulation using modified coagulants to remove polystyrene microplastics from water, finding that surface-modified coagulants achieved significantly higher removal efficiencies than conventional alum. Removal reached over 90% under optimized conditions, demonstrating a practical upgrade pathway for conventional water treatment plants to reduce microplastic discharge.
Surface characteristics of polystyrene microplastics mainly determine their coagulation performances
Researchers evaluated polyaluminum sulfate coagulant for removing polystyrene microplastics from water, achieving 90.4% removal at optimal dosage. Surface characteristics of microplastics including density, particle size, and adsorbed substances significantly influenced coagulation efficiency.
Effect of UV-degraded microplastics on Dissolved Air Flotation (DAF) removal
Polypropylene and polystyrene microplastics subjected to 30 days of UVC irradiation showed altered surface properties and reduced removal efficiency in dissolved air flotation (DAF) water treatment, with UV-degraded microplastics presenting greater challenges for conventional water treatment processes than pristine particles.
Effect of Microplastics on the Coagulation Mechanism of Polyaluminum–Titanium Chloride Composite Coagulant for Organic Matter Removal Revealed by Optical Spectroscopy
This study investigated how microplastics interfere with a water treatment coagulant (PATC) designed to remove dissolved organic matter from drinking water. High concentrations of aged polystyrene microplastics competed with organic matter for active binding sites on the coagulant, reducing its effectiveness at removing certain compounds while also slowing the breakdown of its most reactive component. The results show microplastics in source water can compromise the efficiency of conventional water purification processes.
Investigation of Surface Alteration of Microplastics by Using UV Irradiation
UV radiation causes polystyrene and other plastic microparticles to undergo photooxidative degradation, changing their surface chemistry and potentially making them more likely to adsorb or release chemical pollutants. Understanding these weathering processes is important for predicting the environmental behavior and toxicity of microplastics.
Improving nanoplastic removal by coagulation: Impact mechanism of particle size and water chemical conditions
Researchers found that coagulation using aluminum chlorohydrate and polyacrylamide achieved up to 98.5% removal efficiency for polystyrene nanoplastics, with smaller particles being easier to remove, though humic acid in water competed for adsorption sites and reduced effectiveness.
UV-weathering affects heteroaggregation and subsequent sedimentation of polystyrene microplastic particles with ferrihydrite
Researchers studied how UV weathering alters the heteroaggregation and sedimentation behaviour of 1-micrometre polystyrene microplastic particles with ferrihydrite (an iron oxy-hydroxide common in natural waters). They found that UV weathering changed the surface charge and properties of polystyrene particles, significantly affecting their aggregation with ferrihydrite at neutral pH and their subsequent removal from the water column by sedimentation.
The effects of uv-radiation on the removal of microplastics in water using agglomeration-micro-flotation
Researchers investigated how UV radiation affects the surface wettability of six types of microplastics and its influence on removal efficiency via agglomeration-micro-flotation in water. UV treatment altered surface properties of the microplastics, and results showed that the modified wettability affected flotation performance, offering insights into using UV pre-treatment to enhance microplastic removal in water treatment systems.
Microplastic removal from urban stormwater: Current treatments and research gaps
Researchers investigated the phototransformation of polystyrene microplastics under simulated solar radiation, finding surface oxidation and formation of carbonyl groups after UV exposure. Photo-aged particles showed increased release of dissolved organic carbon and greater toxicity to marine copepods.
Removal behaviors and mechanism of polystyrene microplastics by coagulation/ultrafiltration process: Co-effects of humic acid
Researchers investigated coagulation-ultrafiltration for removing polystyrene microplastics from drinking water, finding that aluminum-based coagulants achieved over 92% removal efficiency and that humic acid co-presence affected the removal mechanism and membrane fouling.
UV-weathering affects heteroaggregation and subsequent sedimentation of polystyrene microplastic particles with ferrihydrite
UV weathering of polystyrene microplastics significantly altered their surface properties, increasing heteroaggregation with ferrihydrite iron colloids and accelerating particle sedimentation compared to pristine PS—demonstrating that environmental weathering substantially changes microplastic fate and removal in aquatic systems.
Effect of ozonation on the morphological characteristics and adsorption behavior of polystyrene microplastics in aqueous environments
Researchers exposed polystyrene microplastics to ozone treatment and found that the aging process made the particles smaller, more negatively charged, and better at absorbing pollutants from water — meaning weathered microplastics in the environment may carry more harmful chemicals than fresh ones.
Chemical Coagulation Applied for the Removal of Polyethylene and Expanded Polystyrene Microplastics
Researchers evaluated the use of aluminum sulfate-based coagulation and flocculation processes for removing polyethylene and expanded polystyrene microplastics from water. The study used factorial experimental designs to optimize treatment conditions including coagulant dosage and pH, demonstrating the potential of chemical coagulation as a microplastic removal strategy.
Removal of polystyrene and polyethylene microplastics using PAC and FeCl3 coagulation: Performance and mechanism
Researchers studied how two common water treatment coagulants, PAC and iron chloride, remove polystyrene and polyethylene microplastics from water. They found that PAC was more effective than iron chloride, and that alkaline conditions improved removal rates. The study provides practical insights for drinking water treatment plants looking to reduce microplastic contamination in their supply.
Removal of Microplastics from Wastewater Treatment Plants by Coagulation
Researchers tested coagulation-based methods for removing microplastics from wastewater using polyaluminum chloride and polyferric sulfate, with and without polyacrylamide additives. The best results came from combining polyaluminum chloride with cationic polyacrylamide, which achieved 87.5% removal of polystyrene microplastics. The study suggests that cationic polyacrylamide works especially well because of electrostatic interactions with negatively charged microplastic particles.
Effects of photochlorination on the physicochemical transformation of polystyrene nanoplastics: Mechanism and environmental fate
Researchers studied how sunlight combined with chlorine in water treatment changes the properties of polystyrene nanoplastics. They found that solar irradiation significantly accelerated the chemical breakdown of the nanoplastics, including surface oxidation and the release of organic compounds. The study reveals that nanoplastics leaving wastewater treatment plants undergo rapid transformation in the environment, which could alter both their fate and toxicity.
Microplastics removal from natural surface water by coagulation process
Researchers compared the effectiveness of ferrous and aluminum sulfate coagulants for removing microplastics from natural surface water, finding that both successfully removed polystyrene and polyvinyl chloride particles. Ferrous sulfate showed slightly higher removal efficiency, and the addition of coagulant aids further improved results. The study demonstrates that conventional coagulation processes already used in drinking water treatment can meaningfully reduce microplastic contamination.
Aggregation kinetics of UV irradiated nanoplastics in aquatic environments
Researchers compared the aggregation behavior of fresh versus UV-aged polystyrene nanoplastics under various aquatic conditions. They found that UV aging altered the surface chemistry of nanoplastics, making them more stable in water and less likely to aggregate, which means they could remain suspended and bioavailable for longer periods. The study suggests that weathered nanoplastics may behave very differently from fresh particles in the environment, complicating risk assessments.