We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Determination of microplastics in municipal wastewater treatment plant effluents and sludge using micro-Raman spectroscopy
Summary
Researchers analyzed microplastics in wastewater and sewage sludge from a treatment plant in Ioannina, Greece, using micro-Raman spectroscopy. They found microplastics of various shapes, sizes, and polymer types throughout the plant, with fibers and fragments being the most common forms. The study highlights that wastewater treatment plants remain a significant pathway for microplastic release into aquatic and terrestrial environments.
Microplastics (MPs) increase global awareness due to their ubiquity, high concentration levels, and devastating effects on the aquatic environment. Wastewater treatment plants (WWTPs) are recognized as a significant source of microplastics in aquatic and terrestrial environments, particularly for plastics used in personal care products and textile fibers from the clothing industry. The focus of the present study was the determination of MP in wastewater and sewage sludge samples of WWTP of Ioannina city, according to their shape, size, concentration, and polymer type. A wet peroxide oxidation (WPO) method using 30% H2O2 and 0.05 M ferrous (II) solution was applied to the water effluent, while an enzymatic digestion method combined with WPO was employed to eliminate the organic matter and extract MPs from sludge samples. Micro-Raman spectroscopy coupled with appropriate software was applied to detect and quantify the microplastic particles. The outcomes from this study showed that the most representative shape of MP in effluent wastewater and sludge was fragments (66.7% and 75%, respectively), followed by fibers, spheres, and films. Polyamide (PA), p -acrylic acid (PAA), and p -acrylamide-co-p -acrylic acid (PAM-co-PAA) were the most abundant polymers (100% frequency of detection), followed by p -vinyl chloride (PVC), p -butyl methacrylate (PBMA), p -ethylene (PE), p -styrene (PS), p -propylene (PP), p -vinyl alcohol (PVA), and p -vinyl butyral (PVB) (20%-80% frequency of detection). The mean concentration of MPs in five sampling campaigns was 5.8 ± 0.6 particles/L in secondary WWTP effluents and 33.3 ± 8 particles/g in sludge. This study focused on monitoring campaign, in order to better understand the occurrence, impact, and risks associated with MPs on WWTPs.
Sign in to start a discussion.
More Papers Like This
Determination of the microplastics emission in the effluent of a municipal waste water treatment plant using Raman microspectroscopy
Raman microspectroscopy was used to measure microplastic concentrations in the effluent of a wastewater treatment plant in Germany, finding that even after secondary treatment, thousands of microplastic particles per day were discharged into the receiving water body. The study underscores that conventional wastewater treatment is insufficient to prevent microplastics from entering aquatic environments.
Microplastics in the Florence wastewater treatment plant studied by a continuous sampling method and Raman spectroscopy: A preliminary investigation
Researchers used continuous sampling and Raman spectroscopy to track microplastics through a Florence wastewater treatment plant, finding that the plant reduces but does not eliminate microplastic loads, with effluent contributing a quantifiable flux to the receiving river.
Quantifying and identifying microplastics in the effluent of advanced wastewater treatment systems using Raman microspectroscopy
Researchers developed a new method combining chemical digestion and Raman microspectroscopy to identify and quantify microplastics in advanced wastewater treatment effluents, finding large numbers of particles smaller than 10 μm in reverse osmosis, nanofiltration, and activated carbon filtration outputs with polyethylene as the most common polymer.
Do drinking water plants retain microplastics? An exploratory study using Raman micro-spectroscopy
Researchers quantified microplastic retention at a Danish groundwater-fed drinking water treatment plant using Raman spectroscopy, finding that the plant reduced but did not eliminate microplastic particles down to 1 micron in size, with some microplastics present in the treated drinking water output.
Identification of Microplastics Using µ-Raman Spectroscopy in Surface and Groundwater Bodies of SE Attica, Greece
Scientists found microplastics in both surface water and groundwater samples across southeastern Greece, with shallow wells containing far more particles than deeper sources. Four common plastic types were identified: polyethylene, polypropylene, polystyrene, and PET. The detection of microplastics even in deeper groundwater suggests these particles can migrate through soil layers, raising concerns about contamination of drinking water sources.