We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics in the Florence wastewater treatment plant studied by a continuous sampling method and Raman spectroscopy: A preliminary investigation
Summary
Researchers used continuous sampling and Raman spectroscopy to track microplastics through a Florence wastewater treatment plant, finding that the plant reduces but does not eliminate microplastic loads, with effluent contributing a quantifiable flux to the receiving river.
The presence of an ever increasing amount of plastic in the Italian river system makes it necessary to understand the contribution of their different sources. We focus on the contribution from the wastewater treatment plants to the microplastics (MPs), size less than 5 mm, conveyed to the fluvial system, and on the development of methods for their detection in this matrix. This study, one of the first in Italy, is aimed to investigate the content of MPs present in the effluent of the main wastewater treatment plant in Florence (Italy). We sampled wastewater during dry season to mainly quantify the contribution from civil and municipal activities to the MPs release. The samples were continuously collected over a period of 24 h at the exit of the water line using a series of 8 sieves with different mesh sizes (almost 1000 L filtered volume). The sampled material was analyzed by optical microscopy and micro-Raman spectroscopy by use of low-cost, portable instruments. The spatial resolution of the spectrometer matches the minimum dimension of the mesh size in use (38 μm). The analysis detected an average concentration of 5 MPs per liter in the 38-1000 μm diameter range, corresponding to a daily release of about 35 kg/day into the River Arno, a result in line with other studies carried out on Europe's major rivers. We provide a classification of the polymer composition showing the predominant presence of Polypropylene (29%), Polyethylene (18%) and Polyester (14%). The MP shape classification reveals the relevance of fibers in effluents. The number of sieves used provided an accurate size distribution curve of the sampled MPs allowing to estimate, by extrapolation, a relevant quantity of MPs finer than 38 μm whose determination would otherwise require much more sophisticated methods.
Sign in to start a discussion.
More Papers Like This
Determination of microplastics in municipal wastewater treatment plant effluents and sludge using micro-Raman spectroscopy
Researchers analyzed microplastics in wastewater and sewage sludge from a treatment plant in Ioannina, Greece, using micro-Raman spectroscopy. They found microplastics of various shapes, sizes, and polymer types throughout the plant, with fibers and fragments being the most common forms. The study highlights that wastewater treatment plants remain a significant pathway for microplastic release into aquatic and terrestrial environments.
Determination of the microplastics emission in the effluent of a municipal waste water treatment plant using Raman microspectroscopy
Raman microspectroscopy was used to measure microplastic concentrations in the effluent of a wastewater treatment plant in Germany, finding that even after secondary treatment, thousands of microplastic particles per day were discharged into the receiving water body. The study underscores that conventional wastewater treatment is insufficient to prevent microplastics from entering aquatic environments.
Microplastics in two German wastewater treatment plants: Year-long effluent analysis with FTIR and Py-GC/MS
Researchers analyzed microplastics in the effluents of two German wastewater treatment plants monthly over one year, revealing temporal variations in microplastic concentrations and polymer compositions entering receiving river systems.
Do drinking water plants retain microplastics? An exploratory study using Raman micro-spectroscopy
Researchers quantified microplastic retention at a Danish groundwater-fed drinking water treatment plant using Raman spectroscopy, finding that the plant reduced but did not eliminate microplastic particles down to 1 micron in size, with some microplastics present in the treated drinking water output.
Underestimating microplastics? Quantification of the recovery rate of microplastic particles including sampling, sample preparation, subsampling, and detection using µ-Ramanspectroscopy
Researchers developed a continuous-dosing method to measure the recovery rate of microplastic particles from wastewater treatment plant effluents, finding that standard sampling approaches may significantly underestimate true microplastic concentrations — particularly for high-density particles like PVC that settle rapidly.