We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
61,005 resultsShowing papers similar to Microcosmic mechanism analysis of the combined pollution of aged polystyrene with humic acid and its efficient removal by a composite coagulant
ClearNew insights into the fate and interaction mechanisms of hydrolyzed aluminum-titanium species in the removal of aged polystyrene
Researchers investigated the interaction between polyaluminum-titanium chloride composite coagulant species and aged polystyrene microplastics, revealing how species transformation during coagulation affects the removal efficiency of microplastics from water.
Uncovering the performance and intrinsic mechanism of different hydrolyzed AlTi species in polystyrene nanoplastics coagulation
Researchers systematically compared how different aluminum-titanium coagulant species remove nanoplastics from water, finding that polymeric AlTi species outperform monomeric ones by achieving 95% turbidity removal at lower doses through a combination of charge neutralization and chemical complexation with the nanoplastic surface.
The suitability and mechanism of polyaluminum-titanium chloride composite coagulant (PATC) for polystyrene microplastic removal: Structural characterization and theoretical calculation
Researchers developed a new coagulant (a chemical that clumps particles together for removal) that effectively removes polystyrene microplastics from water. The composite coagulant worked better than standard water treatment chemicals across a wider range of water conditions, using hydrogen bonding to capture the plastic particles. This technology could improve drinking water treatment plants' ability to filter out microplastics before water reaches consumers.
Revealing the removal behavior of polystyrene nanoplastics and natural organic matter by AlTi-based coagulant from the perspective of functional groups
Researchers examined how the surface chemistry of polystyrene nanoplastics (carboxyl vs. amine groups) and co-occurring natural organic matter influence removal by a novel aluminum-titanium coagulant, finding that amine-functionalized particles are more easily removed across a wider pH range and that low-molecular-weight organic acids preferentially occupy coagulant binding sites, complicating nanoplastic removal in natural water matrices.
Improving nanoplastic removal by coagulation: Impact mechanism of particle size and water chemical conditions
Researchers found that coagulation using aluminum chlorohydrate and polyacrylamide achieved up to 98.5% removal efficiency for polystyrene nanoplastics, with smaller particles being easier to remove, though humic acid in water competed for adsorption sites and reduced effectiveness.
Removal behaviors and mechanism of polystyrene microplastics by coagulation/ultrafiltration process: Co-effects of humic acid
Researchers investigated coagulation-ultrafiltration for removing polystyrene microplastics from drinking water, finding that aluminum-based coagulants achieved over 92% removal efficiency and that humic acid co-presence affected the removal mechanism and membrane fouling.
Coagulation performance and mechanism of different hydrolyzed aluminum species for the removal of composite pollutants of polyethylene and humic acid
Researchers examined how different forms of hydrolyzed aluminum coagulants remove polyethylene microplastics and humic acid from water. The study found that when humic acid adsorbs onto microplastic surfaces, it changes the removal dynamics, and polyaluminum chloride with hexagonal clusters achieved the best microplastic removal through adsorption bridging and sweeping mechanisms.
Efficient removal of nano- and micro- sized plastics using a starch-based coagulant in conjunction with polysilicic acid
Researchers found that combining a starch-based coagulant with polysilicic acid efficiently removes nano- and micro-sized polystyrene particles from water, offering an eco-friendly coagulation approach for addressing microplastic pollution in water treatment applications.
Effect of Microplastics on the Coagulation Mechanism of Polyaluminum–Titanium Chloride Composite Coagulant for Organic Matter Removal Revealed by Optical Spectroscopy
This study investigated how microplastics interfere with a water treatment coagulant (PATC) designed to remove dissolved organic matter from drinking water. High concentrations of aged polystyrene microplastics competed with organic matter for active binding sites on the coagulant, reducing its effectiveness at removing certain compounds while also slowing the breakdown of its most reactive component. The results show microplastics in source water can compromise the efficiency of conventional water purification processes.
Impact of dissolved organic matter characteristics and inorganic species on the stability and removal by coagulation of nanoplastics in aqueous media
Researchers investigated how dissolved organic matter type and ionic composition affect the stability and coagulation removal of nanoplastics, finding that biopolymers rich in proteins and carbohydrates most effectively stabilize particles through steric repulsion, while polymer aluminum chloride (PACl) outperforms alum as a coagulant in the presence of organic matter.
Removal of polystyrene and polyethylene microplastics using PAC and FeCl3 coagulation: Performance and mechanism
Researchers studied how two common water treatment coagulants, PAC and iron chloride, remove polystyrene and polyethylene microplastics from water. They found that PAC was more effective than iron chloride, and that alkaline conditions improved removal rates. The study provides practical insights for drinking water treatment plants looking to reduce microplastic contamination in their supply.
Chemical Coagulation Applied for the Removal of Polyethylene and Expanded Polystyrene Microplastics
Researchers evaluated the use of aluminum sulfate-based coagulation and flocculation processes for removing polyethylene and expanded polystyrene microplastics from water. The study used factorial experimental designs to optimize treatment conditions including coagulant dosage and pH, demonstrating the potential of chemical coagulation as a microplastic removal strategy.
Preparation of composite coagulant for the removal of microplastics in water
Researchers prepared a composite coagulant (polyferric titanium sulfate combined with polydimethyldiallylammonium chloride, PFTS-PDMDAAC) featuring a three-dimensional network polymer structure for removing polystyrene micro-nanoparticles from simulated wastewater. The composite flocculant demonstrated good thermal stability and effective removal of microplastics through combined charge neutralization and bridging mechanisms.
Surface characteristics of polystyrene microplastics mainly determine their coagulation performances
Researchers evaluated polyaluminum sulfate coagulant for removing polystyrene microplastics from water, achieving 90.4% removal at optimal dosage. Surface characteristics of microplastics including density, particle size, and adsorbed substances significantly influenced coagulation efficiency.
Enhanced Removal of Polystyrene Microplastics from Water Through Coagulation Using Polyaluminum Ferric Chloride with Coagulant Aids
Researchers tested enhanced coagulation using modified coagulants to remove polystyrene microplastics from water, finding that surface-modified coagulants achieved significantly higher removal efficiencies than conventional alum. Removal reached over 90% under optimized conditions, demonstrating a practical upgrade pathway for conventional water treatment plants to reduce microplastic discharge.
The influence of coagulation process conditions on theefficiency of microplastic removal in water treatment
Researchers investigated how coagulation process conditions — including coagulant type, pH, and microsand addition — affect the removal of polyethylene, PVC, and textile microfibers from river water, municipal wastewater, laundry effluent, and synthetic matrices. Ferric chloride and polyaluminum chloride both achieved substantial removal, with performance varying significantly by water matrix and microplastic type.
Removal of microplastics from water by coagulation of cationic-modified starch: An environmentally friendly solution
Researchers developed a cationic-modified starch bio-coagulant as an eco-friendly method for removing microplastics from water, achieving an average removal rate of over 65% for polystyrene particles. The starch-based treatment was effective across a wide range of water pH levels and performed well in natural water samples from China's Yangtze River Delta. The study offers a sustainable and cost-effective approach for addressing microplastic contamination in water systems.
Coagulation studies on photodegraded and photocatalytically degraded polystyrene microplastics using polyaluminium chloride
Researchers studied how UV light exposure and photocatalytic degradation change the properties of polystyrene microplastics and affect their removal by a common water treatment chemical. They found that UV-treated microplastics developed rougher surfaces and new chemical groups that made them easier to remove through coagulation. The study suggests that understanding how weathered microplastics behave differently from fresh ones is important for optimizing water treatment processes.
Efficiency and mechanism of micro- and nano-plastic removal with polymeric Al-Fe bimetallic coagulants: Role of Fe addition
Researchers investigated polymeric Al-Fe bimetallic coagulants for removing micro- and nanoplastics from drinking water, finding that iron addition enhanced nanoplastic removal efficiency through improved charge neutralization and floc formation mechanisms.
Aggregation of carboxyl-modified polystyrene nanoplastics in water with aluminum chloride: Structural characterization and theoretical calculation
Aluminum chloride coagulation effectively removed carboxyl-modified polystyrene nanoplastics from water, with structural characterization and theoretical calculations showing that charge neutralization and sweep flocculation mechanisms both contributed to aggregation and sedimentation of the nanoplastics.
Interactions between polypropylene microplastics (PP-MPs) and humic acid influenced by aging of MPs
Researchers examined how aging affects polypropylene microplastic interactions with humic acid, finding that aged microplastics with increased surface oxygen groups showed stronger adsorption of humic acid compared to pristine particles, altering their environmental behavior.
Influence of environmental and biological macromolecules on aggregation kinetics of nanoplastics in aquatic systems
Researchers studied how natural macromolecules like humic acid, alginate, and proteins influence the clumping behavior of polystyrene nanoplastics in water. They found that these macromolecules generally stabilized nanoplastics in sodium chloride solutions but caused them to aggregate in calcium chloride solutions, with effects varying by pH. The findings suggest that the environmental fate and transport of nanoplastics in natural waters depends heavily on the surrounding organic molecules and water chemistry.
Phase transition of Mg/Al-flocs to Mg/Al-layered double hydroxides during flocculation and polystyrene nanoplastics removal
Researchers investigated how magnesium-aluminum layered double hydroxide flocs remove polystyrene nanoplastics from water, finding that electrostatic adsorption and intermolecular forces drive capture efficiency above 90%, with pH-dependent crystal formation playing a key role in the removal mechanism.
Removal of Microplastics from Wastewater Treatment Plants by Coagulation
Researchers tested coagulation-based methods for removing microplastics from wastewater using polyaluminum chloride and polyferric sulfate, with and without polyacrylamide additives. The best results came from combining polyaluminum chloride with cationic polyacrylamide, which achieved 87.5% removal of polystyrene microplastics. The study suggests that cationic polyacrylamide works especially well because of electrostatic interactions with negatively charged microplastic particles.