We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
61,005 resultsShowing papers similar to Quantitative analysis of microplastics in seawater based on SERS internal standard method
ClearIn situ surface-enhanced Raman spectroscopy for detecting microplastics and nanoplastics in aquatic environments
This study evaluated surface-enhanced Raman spectroscopy (SERS) as a method for detecting and identifying microplastics and nanoplastics in aquatic environments, demonstrating its potential for detecting particles too small for conventional spectroscopy while noting remaining challenges for field deployment.
Breaking the Size Barrier: SERS-Based Ultrasensitive Detection and Quantification of Polystyrene Plastics in Real Water Samples
Researchers developed a surface-enhanced Raman spectroscopy (SERS) method capable of detecting and quantifying polystyrene plastic particles of various sizes — including nanoplastics — in real environmental water samples at ultrasensitive concentrations.
Latest Advances and Developments to Detection of Micro‐ and Nanoplastics Using Surface‐Enhanced Raman Spectroscopy
This review examines the latest developments in using surface-enhanced Raman spectroscopy (SERS) to detect micro- and nanoplastics in various environmental samples. Researchers found that SERS offers significantly improved sensitivity compared to conventional methods, enabling detection of smaller plastic particles. The study suggests that SERS-based approaches hold promise for advancing nanoplastic detection, though challenges around standardization and reproducibility remain.
Surface-Enhanced Raman Spectroscopy Facilitates the Detection of Microplastics <1 μm in the Environment
Researchers developed a method using surface-enhanced Raman spectroscopy to detect and identify individual microplastic particles smaller than one micrometer. This technique addresses a major gap in environmental monitoring, since most current methods cannot reliably detect the smallest microplastics that may pose the greatest risk due to their ability to enter cells and tissues.
Hetero-charge-based surface enhanced Raman spectroscopy: An in situ rapid detection strategy for real marine nanoplastics
Researchers developed an in situ SERS detection method using oppositely charged gold nanoparticles to capture and identify nanoplastics directly in seawater without filtration or drying, achieving a detection limit of 0.1 µg/mL in artificial seawater and successfully identifying polystyrene in a real marine sample.
Strategies and Challenges of Identifying Nanoplastics in Environment by Surface-Enhanced Raman Spectroscopy
Researchers reviewed the use of surface-enhanced Raman spectroscopy (SERS) as a tool for detecting nanoplastics, which are plastic particles smaller than one micrometer. The study found that SERS offers high sensitivity for identifying individual nanoparticles, but significant challenges remain in applying this technique to complex environmental samples. The review outlines strategies for improving SERS-based nanoplastic detection to better assess environmental and health risks.
Quantitative Raman analysis of microplastics in water using peak area ratios for concentration determination
Researchers developed a new method using Raman spectroscopy to measure microplastic concentrations in water. By analyzing the ratio of plastic-specific signals to the water signal, they created a reliable calibration model for detecting polyethylene and PVC microplastics, even when multiple plastic types are mixed together. This approach could make it faster and easier to monitor microplastic contamination in real-world water sources.
Advances in Surface‐Enhanced Raman Spectroscopy for Detection of Aquatic Environmental Pollutants
This review examines surface-enhanced Raman scattering (SERS) as a technique for detecting aquatic pollutants, highlighting its exceptional sensitivity and molecular fingerprinting capability for identifying microplastics and other contaminants at trace concentrations.
Systematic quantitation for microplastics and nanoplastics based on size-fractionated filtration hyphenated to Raman/SERS and slope-matching strategy
Researchers developed a systematic method for accurately measuring micro- and nanoplastics using size-fractionated filtration combined with Raman and surface-enhanced Raman spectroscopy. The approach addresses the challenge of quantifying plastic particles with heterogeneous size distributions, offering a more reliable strategy for environmental monitoring.
Trapping tiny pollutants: SERS-driven strategies for microplastics and nanoplastics detection
This review explores how surface-enhanced Raman spectroscopy (SERS) is being developed as a highly sensitive tool for detecting and identifying micro- and nanoplastics in environmental and biological samples. Researchers highlight recent advances in sensor design, the integration of machine learning for improved accuracy, and the technique's potential for real-world monitoring. The study also identifies key challenges, including signal variability and the lack of standardized methods, that need to be resolved for broader adoption.
Superhydrophobic Surface-Enhanced Raman Spectroscopy (SERS) Substrates for Sensitive Detection of Trace Nanoplastics in Water
Researchers developed a new method to detect extremely small nanoplastics in water by combining a water-repelling surface that concentrates particles with a technique called SERS that amplifies their chemical signal. The method can identify common nanoplastics like polystyrene and PMMA at very low concentrations, which is an important step toward monitoring these tiny pollutants that are difficult to detect with current tools.
Quantitative and sensitive analysis of polystyrene nanoplastics down to 50 nm by surface-enhanced Raman spectroscopy in water
Researchers developed a highly sensitive method using surface-enhanced Raman spectroscopy to detect and quantify polystyrene nanoplastics as small as 50 nanometers in water samples. The technique achieved detection limits far below what conventional methods can measure, enabling the identification of nanoplastics at environmentally relevant concentrations. This advancement addresses a critical gap in nanoplastic monitoring, as most existing methods cannot reliably detect particles at such small sizes.
Imaging and identification of single nanoplastic particles and agglomerates
Scientists used a surface-enhanced Raman scattering (SERS) technique to detect and identify individual nanoplastic particles as small as 100 nanometers, a size range that has been extremely difficult to measure with existing methods. The approach can distinguish between single particles and clumps, and works significantly faster than previous imaging techniques. The study represents a meaningful advance in nanoplastic detection that could help researchers better understand the true extent of nanoplastic pollution.
A review of recent progress in the application of Raman spectroscopy and SERS detection of microplastics and derivatives
This review covers advances in using Raman spectroscopy and surface-enhanced Raman spectroscopy (SERS) to detect and identify microplastics in the environment. These techniques offer high resolution and sensitive detection that can identify specific plastic types even at very small sizes. Better detection methods are essential for understanding the true extent of microplastic contamination and its potential risks to human health.
Surface-enhanced Raman spectroscopy for the detection of microplastics
Researchers developed a surface-enhanced Raman spectroscopy method using gold nanoparticles to detect polystyrene microplastics at concentrations as low as 6.5 micrograms per milliliter, offering a new tool for detecting sub-micron plastic pollutants in water.
On-Site Detection of Nanoplastics in Liquid Phase by SERS Method
Researchers developed an on-site detection method for nanoplastics in liquid samples using surface-enhanced Raman spectroscopy (SERS), achieving sensitive identification without the laboratory infrastructure required by conventional GC-MS approaches. The SERS method successfully differentiated nanoplastic types in environmental water samples, offering a practical tool for rapid field-deployable nanoplastic monitoring.
Upscaling sample size for microscopical detection of nanoplastics
Researchers developed a method to detect nanoplastic particles in a full liter of seawater — far more than the tiny droplet-sized samples typical techniques require. By combining chemical purification steps with a special membrane filter that amplifies Raman signals (SERS), they could identify individual nanoplastics down to nanometer scale. This advance matters because nanoplastics are the smallest and potentially most harmful plastic fragments, yet they have been almost impossible to detect in realistic environmental samples until now.
Advanced microplastic monitoring using Raman spectroscopy with a combination of nanostructure-based substrates
Researchers reviewed advances in Raman spectroscopy and surface-enhanced Raman scattering (SERS) — a technique that amplifies light signals using metallic nanostructures — for detecting micro- and nanoplastics at trace concentrations in environmental samples, highlighting new plasmonic materials, 3D substrates, and microfluidic chip platforms that enable on-site monitoring.
The onset of surface-enhanced Raman scattering for single-particle detection of submicroplastics
Researchers demonstrated surface-enhanced Raman scattering (SERS) using gold nanourchins as a detection method for submicroplastic polystyrene particles at the single-particle level, addressing a critical monitoring gap for plastics smaller than 1 micrometer. The approach offers a promising analytical solution for detecting submicron and nanoplastics that conventional techniques cannot reliably quantify.
Expanding sample volume for microscopical detection of nanoplastics
Scientists developed a new method that can detect nanoplastics in much larger water samples than was previously possible, scaling up from tiny droplets to full liters of seawater. The technique combines specialized membrane filters with enhanced Raman spectroscopy to identify individual nanoplastic particles. This advancement addresses a major technical barrier in understanding how widespread nanoplastic contamination really is in ocean environments.
Co-Self-Assembled Monolayer Enables Sensitive SERS Detection of Nanoplastics via Spontaneous Hotspot Entrapment
Researchers developed a new detection method that can identify and measure nanoplastics at concentrations as low as 0.01 micrograms per milliliter by trapping the tiny particles within a single layer of silver nanoparticles. The technique uses surface-enhanced Raman scattering, which amplifies the chemical signal of nanoplastics that are spontaneously captured in the detection hotspots. This approach offers a faster and more sensitive way to monitor nanoplastic pollution in water compared to existing methods.
Study on Rapid Recognition of Marine Microplastics Based on Raman Spectroscopy
Researchers developed a rapid identification system for marine microplastics using Raman spectroscopy, enabling quick determination of plastic type and size. Fast, accurate identification tools are critical for monitoring the growing problem of microplastic pollution in ocean environments.
Identification of polystyrene nanoplastics using surface enhanced Raman spectroscopy
Researchers demonstrated for the first time that surface-enhanced Raman spectroscopy (SERS) using silver nanoparticles can identify polystyrene nanoplastics as small as 50 nm in real water samples, providing a rapid detection method that bypasses conventional sample preparation and could advance environmental monitoring of nanoplastics previously invisible to standard analytical techniques.
How to Identify and Quantify Microplastics and Nanoplastics Using Raman Imaging?
This paper reviews advances in Raman imaging as a method for identifying and quantifying microplastics and nanoplastics in environmental samples, discussing current protocols, analytical challenges, and the need for standardization.