We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Quantitative and sensitive analysis of polystyrene nanoplastics down to 50 nm by surface-enhanced Raman spectroscopy in water
Summary
Researchers developed a highly sensitive method using surface-enhanced Raman spectroscopy to detect and quantify polystyrene nanoplastics as small as 50 nanometers in water samples. The technique achieved detection limits far below what conventional methods can measure, enabling the identification of nanoplastics at environmentally relevant concentrations. This advancement addresses a critical gap in nanoplastic monitoring, as most existing methods cannot reliably detect particles at such small sizes.
Despite being an emerging risk to the environment and human health, little is known about the occurrence, formation, transport, and environmental impact of nanoplastics owing to the lack of quantitative and sensitive sensing techniques. Herein, a surface-enhanced Raman spectroscopy (SERS) method was developed for quantitative sensitive nanoplastics analysis, in which KI was added to Ag nanoparticles as a coagulant and cleaner to remove surface impurities. Polystyrene (PS) nanoplastics with four sizes (50, 100, 200, and 500 nm) were used to evaluate the proposed method, which exhibited high sensitivity (detection limit of 6.25 μg/mL for 100 nm PS nanoplastics), interference resistance, good repeatability, and quantitative analysis ability (R > 0.970). The feasibility of extending the proposed method to real-world water samples was verified using spiked lake water, and satisfactory recovery rates (87.5-110%) were obtained for nanoplastics with different sizes and concentrations. Thus, this study serves as a solid step in the quantitative analysis of nanoplastics, and the findings can be applied to other areas of research on nanoplastics.
Sign in to start a discussion.
More Papers Like This
Breaking the Size Barrier: SERS-Based Ultrasensitive Detection and Quantification of Polystyrene Plastics in Real Water Samples
Researchers developed a surface-enhanced Raman spectroscopy (SERS) method capable of detecting and quantifying polystyrene plastic particles of various sizes — including nanoplastics — in real environmental water samples at ultrasensitive concentrations.
Identification of polystyrene nanoplastics using surface enhanced Raman spectroscopy
Researchers demonstrated for the first time that surface-enhanced Raman spectroscopy (SERS) using silver nanoparticles can identify polystyrene nanoplastics as small as 50 nm in real water samples, providing a rapid detection method that bypasses conventional sample preparation and could advance environmental monitoring of nanoplastics previously invisible to standard analytical techniques.
Surface-enhanced Raman spectroscopy for the detection of microplastics
Researchers developed a surface-enhanced Raman spectroscopy method using gold nanoparticles to detect polystyrene microplastics at concentrations as low as 6.5 micrograms per milliliter, offering a new tool for detecting sub-micron plastic pollutants in water.
High sensitivity in quantitative analysis of mixed-size polystyrene micro/nanoplastics in one step
Scientists developed a new method using filtration combined with surface-enhanced Raman spectroscopy to separate and identify mixed-size micro- and nanoplastics in a single step. The technique achieved detection limits as low as parts-per-billion concentration levels and was successfully tested in real-world tap water samples. Reliable methods for detecting nanoplastics in drinking water are crucial for understanding the extent of human exposure through water consumption.
Direct Detection of Polystyrene Nanoplastics in Water Using High-sensitivity Surface-enhanced Raman Scattering with Ag Nanoarray Substrates
Researchers developed a fast, sensitive detection method using silver nanostructures and laser light scattering (surface-enhanced Raman scattering) to identify polystyrene nanoplastics in water at concentrations as low as 10 micrograms per milliliter, offering a practical tool for monitoring nanoplastic contamination in real-world water sources.