We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
61,005 resultsShowing papers similar to Analysis of The Effect of Aluminum Electrode Geometry on The Removal of Polyethylene Microbeads Using The Electrocoagulation Method in Greywater
ClearEffect of Electrode Distance, Stirring Speed and Contact Time on Removal of Polyethylene Microplastics (Microbeads) Using Electrocoagulation Method
This study evaluated electrocoagulation with aluminum electrodes for removing polyethylene microbeads from water, testing the effects of electrode distance, stirring speed, and contact time. The optimized conditions achieved high removal efficiency, demonstrating electrocoagulation as a viable method for microbead-containing greywater treatment.
Removal of Microbeads from Wastewater Using Electrocoagulation
Researchers tested electrocoagulation as a method for removing microbeads from wastewater, finding it effectively reduced microbead concentrations and offering it as a promising complement to conventional wastewater treatment technologies.
Electrocoagulation Assessment to Remove Micropolystyrene Particles in Wastewater
Researchers evaluated the use of electrocoagulation for removing micropolystyrene particles from synthetic wastewater, testing variables like electrode material, current density, and particle size. They found that the process was effective at removing microplastics, with aluminum electrodes and higher current densities achieving the best results. The study supports electrocoagulation as a viable treatment technology for reducing microplastic loads in wastewater.
Analysis of the Efficiency of the Electrocoagulation Process in the Removal of Microplastics
Researchers demonstrated that electrocoagulation using aluminum electrodes can remove up to 90% of microplastic glitter particles from water, with efficiency increasing as electrical conductivity and current intensity rise. This low-cost, chemical-free approach shows strong potential as a practical treatment step for removing microplastics from water without adding secondary contaminants.
Removal of microplastics by electrocoagulation
Researchers investigated electrocoagulation (EC) as a microplastic removal method using a fractional factorial design to evaluate electrode type, contact time, agitation speed, and current density, finding that an aluminum anode at 20 A/m2 and 70 rpm achieved 98.04% microplastic removal within 15 minutes with high model accuracy (R2 = 0.99).
Removal of Microplastics from Wastewater by Methods of Electrocoagulation and Adsorption
This review examines electrocoagulation and adsorption methods for removing microplastics from wastewater, comparing them against conventional physical, chemical, and biological approaches in terms of removal efficiency, cost, and practical scalability.
Assessing the efficacy of electrocoagulation process for polypropylene microplastics removal from wastewater: Optimization through TOPSIS approach
Researchers evaluated electrocoagulation as a method for removing polypropylene microplastics from wastewater, testing different electrode materials and operating conditions. They found that using aluminum electrodes achieved up to 95.5% microplastic removal efficiency with relatively low energy consumption. The study suggests that electrocoagulation is a practical and cost-effective treatment option that could complement existing wastewater treatment processes.
Utilizing Electrosorptionfor Efficient Removal ofPolyethylene Microplastics from Water: Critical Factors and MechanisticInsights
An electrosorption method was developed to remove polyethylene microplastics from wastewater, demonstrating improved removal efficiency compared to conventional treatment, especially for smaller particles that typically escape standard wastewater treatment plants.
Evaluating the performance of electrocoagulation system in the removal of polystyrene microplastics from water
Researchers tested electrocoagulation, a water treatment method that uses electric current to clump particles together, for removing polystyrene microplastics from water. Using aluminum electrodes at neutral pH, they achieved over 90% removal efficiency. This technology could provide a practical and effective way to remove microplastics from drinking water and wastewater, reducing human exposure to these contaminants.
Efficient removal of nanoplastics from synthetic wastewater using electrocoagulation
Researchers demonstrated that electrocoagulation using aluminum electrodes can remove more than 95% of polystyrene nanoplastics from synthetic wastewater, offering a promising treatment upgrade for conventional wastewater plants that currently allow nanoplastics to pass through.
Examining Current and Future Applications of Electrocoagulation in Wastewater Treatment
This review provides a comprehensive look at electrocoagulation, an electricity-based water treatment technique that can remove a wide range of pollutants including microplastics from wastewater. The analysis covers decades of research showing the method is effective, relatively low-cost, and environmentally friendly compared to chemical treatments. The authors identify microplastic removal as one of the promising newer applications of this technology.
Title Perniciousness of microplastics in the ocean and electrocoagulation in microplastic removal in effluent treatmentprocess.
This report reviews the environmental harm of ocean microplastics and evaluates electrocoagulation as a wastewater treatment technology for microplastic removal, examining its dissolution, coagulation, and flocculation mechanisms and the factors affecting its efficiency.
Assessing the Removal Efficiency of Microplastics from Water Using Electrocoagulation
Researchers in Pakistan tested electrocoagulation as an affordable method for removing microplastics from water, measuring removal efficiency across different electrode materials and operating conditions. The technique achieved high removal rates while meeting sustainable development goals around clean water access, with iron electrodes outperforming aluminum.
Reduction of Microplastic in Wastewater Via Electrocoagulation Process
This review examines how electrocoagulation, a water treatment process that uses electrical current to clump contaminants together, can remove microplastics from wastewater. Researchers found that the technique can achieve high removal rates for various types and sizes of microplastic particles. The study highlights electrocoagulation as a promising and relatively simple addition to conventional wastewater treatment for addressing microplastic pollution.
Title Perniciousness of microplastics in the ocean and electrocoagulation in microplastic removal in effluent treatment process
This study reviewed the environmental harms of microplastics in the ocean and assessed electrocoagulation as a removal technology for wastewater treatment. Electrocoagulation showed promise as an effective and scalable method for removing microplastics from wastewater before ocean discharge.
A Comprehensive Review of the Developments in Electrocoagulation for the Removal of Contaminants from Wastewater
This comprehensive review covers electrocoagulation, an emerging water treatment technology that uses electrical current to remove pollutants including microplastics from wastewater. The method offers advantages like smaller equipment size, simpler operation, and lower chemical use compared to traditional approaches. As concerns about microplastics in water grow, electrocoagulation represents a promising tool for cleaner water treatment.
Optimizing microplastic treatment in the effluent of biological nutrient removal processes using electrocoagulation: Taguchi experimental design
Researchers optimized an electrocoagulation process using aluminum electrodes to remove microplastics from biological wastewater treatment plant effluent. Using Taguchi experimental design, they identified the most important process variables affecting removal efficiency, including current density and treatment time. The study demonstrates that electrocoagulation can be an effective supplementary treatment step for reducing microplastic discharge from wastewater facilities.
Coagulation technologies for separation of microplastics in water: current status
This review examines how coagulation water treatment technologies can remove microplastics from water. Conventional coagulation achieves 8-98% removal efficiency while electrocoagulation achieves 8-99%, depending on conditions, offering a potentially effective approach for reducing microplastics in drinking water and wastewater.
Investigating the Potential of Coagulants to Improve Microplastics Removal in Wastewater and Tap Water
Researchers found that adding coagulants (FeCl3 or Al2(SO4)3) to wastewater and tap water improved microplastic removal, with aluminum sulfate achieving 43% and 62% removal efficiencies respectively, though the high concentrations required suggest that combining coagulants with organic polyelectrolytes could improve practicality.
Comparative evaluation of activated sludge and electrocoagulation for microplastics removal from sewage
Researchers compared conventional activated sludge treatment and electrocoagulation for microplastic removal from sewage in Egypt, finding that activated sludge achieved 83% removal while subsequent electrocoagulation treatment raised overall removal to over 91%, with polyethylene and polypropylene confirmed as the dominant polymer types in both influent and effluent.
Electro-coagulation technique using iron [Fe] and aluminium [Al] for microplastics removal from fashion industry wastewater, Thailand
Laboratory tests showed that electrocoagulation — running electrical current through iron and aluminum electrodes — can remove microplastics from textile industry wastewater in Thailand with high efficiency. Because conventional wastewater treatment plants were not designed to capture particles as small as microplastics, electrochemical methods like this represent a promising upgrade to reduce the millions of microplastic particles released daily from textile factories.
Fate and transformation of microplastics due to electrocoagulation treatment: Impacts of polymer type and shape
Researchers tested how electrocoagulation, a cost-effective water treatment method, removes and transforms different types and shapes of microplastics. They found that the technique removed over 88 percent of microplastics overall, with fibers being captured more effectively than fragments. The treatment also caused physical and chemical changes to the plastic surfaces, indicating that electrocoagulation both removes and partially degrades microplastic pollutants.
Innovative prototype for the mitigation of water pollution from microplastics to safeguard the environment and health
Researchers developed an innovative prototype device for removing microplastics from water through a combination of filtration and electrocoagulation, demonstrating high MP removal efficiency from both synthetic and real water samples in controlled trials.
Electrocoagulation in Wastewater Treatment: A Comprehensive Review of Heavy Metal and Pollutant Removal
This comprehensive review evaluates electrocoagulation as a wastewater treatment method for removing heavy metals and other pollutants, including microplastics. Researchers found that electrocoagulation is a versatile and effective technique compared to conventional methods like membrane filtration or chemical coagulation. The study highlights its advantages in terms of environmental compatibility and cost-effectiveness, while noting that optimization of operating parameters is still needed for different wastewater types.