0
Article Tier 2 Remediation Sign in to save

Assessing the efficacy of electrocoagulation process for polypropylene microplastics removal from wastewater: Optimization through TOPSIS approach

Environmental Science and Pollution Research 2025 2 citations

AI summary Read the abstract

Researchers evaluated electrocoagulation as a method for removing polypropylene microplastics from wastewater, testing different electrode materials and operating conditions. They found that using aluminum electrodes achieved up to 95.5% microplastic removal efficiency with relatively low energy consumption. The study suggests that electrocoagulation is a practical and cost-effective treatment option that could complement existing wastewater treatment processes.

Polymers
Study Type Environmental

Emerging contaminants, microplastics in particular, pose a substantial risk to human health and the environment. Conventional treatments fail to incorporate focused approaches to eliminate them. This research comprehensively evaluated the effectiveness of electrocoagulation as a techno-economic method for removal of microplastics from water. The research meticulously investigated the effects of various electrode combinations composed of SS (stainless steel) and Al (aluminium) with possible combination as Al-Al, Al-SS, SS-Al and SS. Out of the various combinations considered, it was discovered that the Al-Al coupling demonstrated exceptional efficacy of 95.54% in the elimination of microplastics, with a concurrent reduction in energy consumption. The initial pH value was found to be a crucial parameter, as evidenced by the highest removal efficacy of 92.80% observed at a near neutral alkaline pH of 8. However, in order to determine economic efficacy, it is necessary to consider additional variables including energy consumption, electrode utilisation, and post-treatment conductivity. In order to address the intricacy presented by a multitude of parameters and criteria, it is critical to employ multi-criteria decision-making tools such as Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), which has demonstrated efficacy in real-world scenarios. The optimal electrolyte concentration, as determined by TOPSIS analysis, is 0.5 g/L. Furthermore, the TOPSIS analysis underscored the superior performance of punched hollow cylindrical electrode. The investigation conducted a thorough assessment of the impact of time period and concluded that a 100-min interval offers the highest efficacy in removing microplastics. At an input concentration of 2 g/L, this enhanced optimized system demonstrated outstanding competence in removing microplastics of three different sizes 45-90 μm, 90-180 μm, and 180-355 μm, with the removal efficiencies of 89.80%, 93.12%, and 94.08%, respectively. The current study introduces a pragmatic and exceptionally efficient approach to tackle the urgent problem of microplastic pollution in aquatic ecosystems.

More Papers Like This

Article Tier 2

Evaluating the performance of electrocoagulation system in the removal of polystyrene microplastics from water

AI summary Read the abstract

Researchers tested electrocoagulation, a water treatment method that uses electric current to clump particles together, for removing polystyrene microplastics from water. Using aluminum electrodes at neutral pH, they achieved over 90% removal efficiency. This technology could provide a practical and effective way to remove microplastics from drinking water and wastewater, reducing human exposure to these contaminants.

Article Tier 2

Electrocoagulation Assessment to Remove Micropolystyrene Particles in Wastewater

AI summary Read the abstract

Researchers evaluated the use of electrocoagulation for removing micropolystyrene particles from synthetic wastewater, testing variables like electrode material, current density, and particle size. They found that the process was effective at removing microplastics, with aluminum electrodes and higher current densities achieving the best results. The study supports electrocoagulation as a viable treatment technology for reducing microplastic loads in wastewater.

Article Tier 2

Removal of HDPE Microplastics via Al–Al Electrocoagulation in Synthetic Water and Real Municipal Wastewater: Process Optimization, Energy Trade-Offs, and Sludge Characterization

AI summary Read the abstract

Researchers tested an electrical water treatment method to remove tiny plastic particles (HDPE microplastics) from real municipal wastewater. The method removed about 88.5% of the microplastics at neutral pH, also reducing other pollutants, but higher electrical settings used much more energy without much extra benefit.

Article Tier 2

Response Surface Methodology for Optimizing Electrocoagolation-based Removal of Polypropylene Microplastics from Wastewater: Efficiency Comparison of  Rubber and Thermoplastic-Derived Particles

AI summary Read the abstract

This study optimized electrocoagulation for polypropylene microplastic removal from wastewater, achieving 97% efficiency at a cost of roughly $0.23 per cubic meter under ideal pH and current density conditions, with over 90% efficiency across all tested plastic types. The results offer a cost-effective, scalable treatment approach that could significantly reduce microplastic discharge into aquatic environments from municipal and industrial wastewater.

Article Tier 2

Analysis of the Efficiency of the Electrocoagulation Process in the Removal of Microplastics

AI summary Read the abstract

Researchers demonstrated that electrocoagulation using aluminum electrodes can remove up to 90% of microplastic glitter particles from water, with efficiency increasing as electrical conductivity and current intensity rise. This low-cost, chemical-free approach shows strong potential as a practical treatment step for removing microplastics from water without adding secondary contaminants.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper