We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
20 resultsShowing papers similar to The Impact of Recycled Polyethylene Terephthalate as Aggregate Replacement on Mechanical and Ecotoxicological Properties of Mortar
ClearOn the Cementitious Mixtures Reinforced with Waste Polyethylene Terephthalate
Researchers investigated the reuse of waste polyethylene terephthalate plastic as aggregate material in cement mortars and concretes. They found that incorporating PET waste into cementitious mixtures can be a viable strategy for recycling plastic while also reducing CO2 emissions from traditional aggregate mining. The study suggests that closing the life cycle of PET through construction materials could help address both plastic pollution and the environmental footprint of the building industry.
Utilization of plastic waste as replacement of natural aggregates in sustainable concrete: effects on mechanical and durability properties
Researchers tested concrete made with recycled polyethylene and PET plastic aggregates substituted for natural sand and gravel, finding that while plastic additions reduced compressive strength and increased water permeability, they improved impact resistance and chloride resistance, with PET concrete showing no microplastic leaching.
Sustainable geopolymers from polyethylene terephthalate waste and industrial by-products: a comprehensive characterisation and performance predictions
Researchers developed geopolymer bricks using recycled PET plastic waste combined with industrial by-products like rice husk ash and blast furnace slag. They found that certain formulations produced bricks with strength and durability comparable to conventional building materials. The study demonstrates a practical approach for diverting plastic waste from landfills while creating sustainable construction materials.
Evaluating the structural performance of waste PET-infused interlocking units versus traditional stone masonry
This study is not directly about microplastics — it evaluates the compressive strength and water absorption of interlocking bricks made from waste PET plastic as a partial cement replacement in construction.
Potential use of PET and PP as partial replacement of sand in structural concrete
Researchers tested whether PET and polypropylene plastic waste could partially replace sand in structural concrete, evaluating the physical and mechanical properties of the resulting material. Using post-consumer plastic in construction is one strategy for diverting plastic from the waste stream and preventing it from breaking down into environmental microplastics.
Experimental Tests on Lightweight Cement Mortar and Concrete with Recycled Plastic Wastes
This paper is not relevant to microplastics research — it tests the mechanical properties of cement mortar and concrete incorporating recycled plastic waste granules as aggregate substitutes, a construction materials engineering study.
Assessment of Plastic-Infused Concrete Bricks and Their Suitability for Interlocking: Mechanical, Durability, and Environmental Perspectives
Researchers tested plastic-infused concrete bricks as a way to repurpose plastic waste in construction materials, evaluating their mechanical strength and suitability for different building applications. The study explores whether incorporating plastic waste into durable materials can reduce the plastic entering the environment as microplastics.
Strength Characteristics of Alkali-Activated Slag Mortars with the Addition of PET Flakes
Researchers investigated incorporating PET plastic flakes into alkali-activated slag mortars as an alternative to Portland cement, finding that PET additions affected mechanical strength in ways that depend on flake content. This approach offers a potential use for waste PET plastic while reducing cement production emissions.
Pervious Pavement Blocks Made from Recycled Polyethylene Terephthalate (PET): Fabrication and Engineering Properties
Researchers developed and tested pervious pavement blocks made from recycled PET plastic waste, finding they met engineering standards for strength and permeability. The study offers a dual benefit: diverting plastic waste from landfills while creating functional construction materials that help manage urban stormwater.
Utilization of Plastic Waste in Concrete Pavement
Researchers investigated the use of recycled high-density polyethylene (HDPE) plastic waste as an aggregate in concrete pavement mix designs, finding that incorporation of HDPE improved mechanical performance and durability while reducing landfill waste and energy consumption in the concrete sector.
Recycled Mixed Plastic Fine Aggregate in Cement Concrete
Cement concrete mixtures incorporating mixed post-consumer recycled plastic as fine aggregate were characterized, finding that an optimized blend of polymer types produced workable concrete with mechanical properties suitable for construction applications.
Polyethylene (PE) Waste Minimization Study of Cement Mortar with Adding PE Content under Different W/B Ratios
This study tested cement mortar containing recycled polyethylene plastic waste, finding that small amounts of plastic can be incorporated without significantly compromising durability, offering a route for diverting plastic from landfills into construction materials.
Waste Plastic and Rubber in Concrete and Cement Mortar: A Tertiary Literature Review
This review synthesized tertiary literature on using waste plastic and rubber in concrete and cement mortar, finding that while these recycled materials offer environmental benefits, they generally reduce mechanical strength and require careful optimization.
Utilization of Plastic Waste for Developing Composite Bricks and Enhancing Mechanical Properties: A Review on Challenges and Opportunities
This review of research on plastic waste composite bricks found that PET has the highest recycling efficiency among plastics used for brick production and highlights the need for standardized specifications, contamination assessments, and policy frameworks to promote wider adoption.
Investigating the Use of Post-Consumer LDPE Waste and Stone Dust in Sustainable Concrete Composites
Researchers incorporated post-consumer LDPE plastic waste and stone dust into concrete mixes and found that these additions can maintain acceptable mechanical properties. Reusing plastic waste in construction materials diverts plastics from landfills and reduces their potential to fragment into environmental microplastics.
Meta-analysis on PET plastic as concrete aggregate using response surface methodology and regression analysis
This meta-analysis studies how using recycled PET plastic as an ingredient in concrete affects its strength. While not a health study, it explores a practical way to keep plastic waste out of the environment by incorporating it into building materials. Reducing plastic waste through recycling into construction materials could help lower the amount of plastic that breaks down into microplastics.
Environmental and Cost Advantages of Using Polyethylene Terephthalate Fibre Reinforced Concrete with Fly Ash as a Partial Cement Replacement
This study examined the environmental and cost benefits of using recycled PET plastic bottles as fiber reinforcement in concrete, combined with fly ash as a partial cement replacement. Repurposing plastic waste in construction materials could help reduce the volume of plastic entering the environment as microplastics.
Eco-friendly Concrete Using Waste Plastic Bottles as Aggregate: A Case Study from Oman
This Omani study tested concrete made with waste plastic PET bottles as a partial replacement for fine aggregate. Adding recycled plastic to concrete is a promising strategy to divert plastic waste from the environment, and the study found acceptable mechanical performance for non-structural applications.
A Step towards Sustainable Concrete with Substitution of Plastic Waste in Concrete: Overview on Mechanical, Durability and Microstructure Analysis
This review evaluates the use of plastic waste as a substitute material in concrete, analyzing its effects on mechanical strength, durability, and microstructure to assess its viability as a sustainable construction approach.
Pemanfaatan Limbah Plastik PET (Polyethylene Terephthalate) dalam Pembuatan Bata Ringan CLC (Cellular Lightweight Concrete): Studi Eksperimental
Researchers investigated the use of PET plastic waste as a partial substitute for fine aggregates in the production of cellular lightweight concrete (CLC) bricks. The experimental study analyzed the effects of PET substitution on mechanical and physical properties including compressive strength, density, and water absorption.