We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Occurrence and removal of microplastics in a municipal wastewater treatment plant with conventional activated sludge process: A case study in Isfahan, Iran
Summary
A case study of a municipal wastewater treatment plant in Isfahan, Iran found that conventional activated sludge processes removed over 80% of incoming microplastics but that effluent still contained significant particle numbers, confirming that even high-efficiency plants are a route for microplastics entering the environment.
Background: Microplastics (MPs) are nowadays found in the air and in various terrestrial and aquatic environments and have become emerging pollutants. These particles can absorb other chemicals and microbial contaminants and release them into the environment and food chain. Despite the high efficiency of wastewater treatment plants (WWTPs) in removing MPs, WWTPs are still one of the major sources of MPs discharge to the environment. This study was conducted to evaluate the efficiency of MPs removal in a municipal WWTP with conventional activated sludge in Iran. Methods: MPs particles were counted using a stereomicroscope after the initial preparation steps (sieving, chemical digestion with the catalytic wet peroxidation-oxidation and density separation with NaCl) and then analyzed for particle composition using a Raman micro-spectrometer. Results: MPs concentration in the influent, grit chamber, primary sedimentation tank, and effluent were 843.2±147.5, 315.5±54.7, 80.2±19.1, and 11.13±3.14 items/L, respectively. The overall MPs removal efficiency of the WWTP was 98.7%, with the grit chamber, primary sedimentation tank, and secondary sedimentation tank removed 62.6%, 27.9%, and 8.2% of the total MPs, respectively. The most abundant polymers were polypropylene (PP) and polyethylene (PE). Conclusion: Despite the effective removal of MPs in WWTP, on average 4.47×1011±1.03×1011 MPs are discharged into the receiving waters through the effluent of this WWTP annually. This means that WWTPs can be one of the major sources of MPs in the environment and efforts should be made to increase the efficiency of WWTPs and equip them with advanced technologies.
Sign in to start a discussion.
More Papers Like This
Abundance, characteristics, fate, and removal of microplastics during municipal wastewater treatment plant in the west of Iran: the case of Kermanshah city
A three-month study of a conventional activated sludge wastewater treatment plant in Kermanshah, Iran found that while the facility removed about 64% of incoming microplastics, large quantities still passed through into the effluent — making the plant a net source of microplastic pollution to the aquatic environment. Fibers dominated incoming samples while fragments were more prevalent in the treated effluent, and polyethylene was the most common polymer detected throughout.
Effectiveness of conventional municipal wastewater treatment plants in microplastics removal: Insights from multiple analytical techniques
Researchers evaluated the effectiveness of conventional municipal wastewater treatment plants in removing microplastics across multiple treatment stages, finding removal efficiencies of 70–90% but documenting that billions of particles still pass through in final effluent daily.
Occurrence, identification, and discharge of microplastics from effluent and sludge of the largest WWTP in Iran—South of Tehran
Researchers quantified microplastics in Iran's largest wastewater treatment plant and found significant concentrations in both effluent and sludge, identifying the facility as a pathway for microplastic release into the environment despite treatment processes.
Understanding microplastic presence in different wastewater treatment processes: Removal efficiency and source identification
Researchers tracked microplastic removal across different treatment stages at two wastewater treatment plants and found overall removal rates of 90% and 97%. They discovered that population density in the served area was a bigger driver of influent microplastic levels than sewage volume, and that activated sludge served as the primary trap for captured particles. The study identified laundry washing and daily consumer products as the main sources of microplastics entering the treatment plants.
Occurrence of microplastics in influent, sewage sludge and effluent of municipal wastewater treatment plant, A case study center of Iran, Qom city
A study of a municipal wastewater treatment plant found microplastics in the influent, sewage sludge, and effluent, confirming that treatment processes do not fully remove plastic particles before water is discharged. This matters because treated wastewater and sludge applied to agricultural land are significant pathways through which microplastics enter rivers, soils, and ultimately the food supply.