We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Abundance, characteristics, fate, and removal of microplastics during municipal wastewater treatment plant in the west of Iran: the case of Kermanshah city
AI summary Read the abstract
A three-month study of a conventional activated sludge wastewater treatment plant in Kermanshah, Iran found that while the facility removed about 64% of incoming microplastics, large quantities still passed through into the effluent — making the plant a net source of microplastic pollution to the aquatic environment. Fibers dominated incoming samples while fragments were more prevalent in the treated effluent, and polyethylene was the most common polymer detected throughout.
The threat of microplastics (MPs) in aquatic systems is almost a new challenge in environmental management. The municipal wastewater treatment plants (WWTPs) act both as collectors of MPs from anthropic use and as a source to natural environments. This study is aimed to determine the abundance, characteristics, and removal of MPs in a municipal WWTP with conventional activated sludge process. Particle size/type, influent loads, and removal rate of MPs in bar screen, grit chamber, primary sedimentation, returned activated sludge, and secondary clarification units of this WWTP were studied by collecting composite samples from wastewater and sludge over a 3-month sampling campaign. Suspected MP particles were counted by light microscopy and characterized using SEM, EDS, FTIR, and TGA-DSC techniques. The mean total MPs, fibers, and fragment concentration after the grit chamber were 6608, 3594, and 3014 which were reduced to 1855, 802, and 1053 particles/L in the effluent, respectively. The sludge retention of total MPs, fibers, and fragments were 8001, 3277, and 4719 particles/L, respectively. The overall efficiency of WWTP with an activated sludge process to remove MPs was 64% and it removed 66.6% and 60% of fibers and fragments, respectively. Fibers were the dominant shape for the collected samples after the grit chamber and fragments were prevalent in the effluent. Polyethylene polymer was detected in most wastewater samples. Existing treatment processes are effective in the removal of MP particles but still act as a potential source to the aquatic ecosystem.
More Papers Like This
Occurrence and removal of microplastics in a municipal wastewater treatment plant with conventional activated sludge process: A case study in Isfahan, Iran
AI summary Read the abstract
A case study of a municipal wastewater treatment plant in Isfahan, Iran found that conventional activated sludge processes removed over 80% of incoming microplastics but that effluent still contained significant particle numbers, confirming that even high-efficiency plants are a route for microplastics entering the environment.
Occurrence, identification, and discharge of microplastics from effluent and sludge of the largest WWTP in Iran—South of Tehran
AI summary Read the abstract
Researchers quantified microplastics in Iran's largest wastewater treatment plant and found significant concentrations in both effluent and sludge, identifying the facility as a pathway for microplastic release into the environment despite treatment processes.
Study on presence of microplastic pollution in the wastewater treatment plant of district 22 of Tehran
AI summary Read the abstract
Researchers investigated microplastic pollution in the wastewater treatment plant of Tehran district 22, finding significant microplastic concentrations in both influent and effluent. Despite removing a large proportion, the plant still released microplastics into the environment through treated effluent.
Distribution and abundance of microplastics in urban and industrial wastewater treatment plants in Tabriz metropolis
AI summary Read the abstract
Researchers assessed microplastic contamination in two urban and five industrial wastewater treatment plants in Tabriz, Iran, a city of 1.6 million people. Urban treatment plants removed less than 10% of microplastics, while industrial plants showed somewhat better removal rates. The study found that existing wastewater treatment infrastructure is largely ineffective at filtering out microplastics, meaning significant quantities are being released into surface waters.
Evaluation of pollution caused by microplastics particles in municipal wastewater and sewage sludge (Case study: Al-Ghadir town, Kerman)
AI summary Read the abstract
Researchers evaluated microplastic contamination in municipal wastewater and sewage sludge at a treatment plant in Kerman, Iran, collecting 36 paired wastewater and sediment samples monthly at approximately 30 liters per sample. The study characterized microplastic frequency, morphology, and composition across influent and effluent streams, identifying the plant as a significant microplastic discharge point.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.