We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
61,005 resultsShowing papers similar to Quantification of tire wear particles in road dust based on synthetic/natural rubber ratio using pyrolysis-gas chromatography–mass spectrometry across diverse tire types
ClearA Tiered Quantification and Source Mapping Framework for Tire Wear Particle Analysis in Environmental Matrices
Researchers developed an improved method for quantifying tire wear particles in environmental samples using pyrolysis gas chromatography-mass spectrometry based on real tire tread composition. The approach achieved 94-113% accuracy, a significant improvement over previous methods, and includes a tiered framework for distinguishing tire-derived signals from other interference. This methodology enables more reliable tracking of tire wear particles, a major but often underestimated source of microplastic pollution.
Challenges with Quantifying Tire Road Wear Particles: Recognizing the Need for Further Refinement of the ISO Technical Specification
Analysis of 39 commercially available tire tread samples from Australia and Norway using Py-GC/MS found that synthetic rubber content was highly variable (<0.05–28%), challenging a key assumption of ISO technical specifications for quantifying tire road wear particles.
Qualitative and Quantitative Analysis of Tire Wear Particles (TWPs) in Road Dust Using a Novel Mode of Operation of TGA-GC/MS
This study developed qualitative and quantitative methods for analyzing tire wear particles (TWPs) in road dust, using a combination of analytical techniques to distinguish rubber particles from other road dust components. Accurate TWP quantification is essential for assessing their contribution to environmental microplastic burdens.
Adapting Methods for Isolation and Enumeration of Microplastics to Quantify Tire Road Wear Particles with Confirmation by Pyrolysis GC–MS
Researchers adapted microplastic analysis methods for isolating and counting tire road wear particles from environmental samples, a challenging task due to the varied composition and density of these particles. They found that alkaline digestions are compatible with tire rubber but hydrogen peroxide can damage the particles, and developed visual criteria to distinguish tire particles from bitumen. The adapted methods were validated with road dust samples and confirmed by electron microscopy and pyrolysis mass spectrometry.
Analytical challenges and possibilities for the quantification of tire-road wear particles
This review examines the analytical challenges involved in measuring tire-road wear particles, one of the largest sources of microplastic emissions. Researchers cataloged the wide range of methods used to detect and quantify these particles, noting that their varied size, shape, density, and chemical makeup make consistent measurement difficult. The study highlights the need for standardized analytical approaches so that results from different studies can be meaningfully compared.
Quantification of tire tread wear particles in microparticles produced on the road using oleamide as a novel marker
A novel analytical method using oleamide, a compound incorporated into tire rubber for processing purposes, as a chemical marker was developed and validated to quantify tire tread wear particles in road microparticle samples, offering improved specificity over existing benzothiazole-based approaches for source attribution of tire-derived microplastics.
Novel method for the characterization and quantification of rubber particles in air samples and human blood
Researchers developed a novel method to characterize and quantify rubber particles from tire and road wear in air samples, targeting natural rubber and styrene butadiene rubber. The method addresses a key gap in monitoring one of the largest sources of environmental microplastics.
Pollution from Transport: Detection of Tyre Particles in Environmental Samples
This study reviews tyre wear particles as a major but underestimated source of microplastic pollution from road transport, describing methods for detecting these particles in environmental samples including road dust, waterways, and soils. The authors call for greater regulatory attention to tyre-derived emissions alongside other transport-related pollutants.
ATiered Quantification and Source Mapping Frameworkfor Tire Wear Particle Analysis in Environmental Matrices
Researchers developed a tiered quantification and source mapping framework for tire wear particles (TWPs) in environmental matrices, using pyrolysis GC-MS with real tread-derived calibration curves to improve quantification accuracy across heterogeneous tread compositions.
Comparison of Methods for Sampling Particulate Emissions from Tires under Different Test Environments
Researchers compared different methods for sampling tire wear particle emissions under various test conditions, finding significant methodological differences that affect measurement outcomes and highlighting the need for standardized approaches as non-exhaust emissions become an increasing share of total vehicle pollution.
A novel method for the quantification of tire and polymer-modified bitumen particles in environmental samples by pyrolysis gas chromatography mass spectroscopy
Researchers developed a novel pyrolysis gas chromatography mass spectrometry method for quantifying tire and polymer-modified bitumen particles in environmental samples, improving the detection of what may be the largest source of microplastic pollution.
Novel method for the characterization and quantification of rubber particles in air samples and human blood
This study developed a novel method to characterize and quantify tire and road wear rubber particles in environmental samples, identifying natural and synthetic rubber polymers including vulcanized styrene-butadiene rubber as the dominant components. The method advances monitoring capabilities for one of the largest sources of microplastic emissions globally.
On-Road Vehicle Measurement of Tire Wear Particle Emissions and Approach for Emission Prediction
An instrumented measurement vehicle was developed to quantify tire wear particle emissions under real-world on-road conditions, identifying key driving parameters such as speed, load, and cornering that govern emission rates. The study supports the development of emission factors and regulatory standards for non-exhaust tire-derived microplastic pollution.
Characteristics of Vehicle Tire and Road Wear Particles’ Size Distribution and Influencing Factors Examined via Laboratory Test
Researchers conducted laboratory tests to characterize the size distribution of tire and road wear particles under various conditions. The study found that factors such as driving speed, tire composition, and road surface characteristics significantly influence the size and quantity of wear particles released, which are a growing source of microplastic pollution.
Concentrations of tire wear microplastics and other traffic-derived non-exhaust particles in the road environment
Researchers measured actual environmental concentrations of tire wear microplastics and other traffic-derived non-exhaust particles in a rural highway setting, providing field-based data to complement the theoretical estimates that dominate current literature.
Methods for laboratory-generation and physico-chemical characterisation of tyre wear particles
Researchers developed a lab method to generate tire wear particles using a friction machine and then identified a suite of chemical compounds that could serve as reliable markers for detecting these particles in environmental samples. Tire wear is one of the largest single sources of microplastic pollution globally, yet quantifying it in the environment has been hampered by the lack of agreed marker compounds. This work lays groundwork for standardized monitoring of tire particle pollution in soils and waterways.
Realistic evaluation of tire wear particle emissions and their driving factors on different road types
This study measured tire wear particle (TWP) emissions under realistic driving conditions on different road types and identified the key driving factors affecting emission rates. Tire wear particles are a major category of microplastic pollution in road runoff, and this data is needed to estimate their contribution to environmental contamination.
Classification and Characterization of Tire-Road Wear Particles in Road Dust by Density
Tire-road wear particles were classified and characterized by density using road dust from an asphalt pavement, allowing separation of tire tread-derived particles from road surface and mineral components. The density-based classification approach improves the accuracy of tire wear particle quantification in environmental monitoring studies.
Tire Wear and Pollutants: An Overview of Research
This review provides an overview of tire road and wear particles as a major source of microplastic emissions, examining both experimental and mathematical approaches to measuring tire wear. The study notes that while tire wear particles are found in alarming amounts across various environments, they remain less studied than other microplastics, and calls for more accurate simulation models to predict tire wear emissions.
Challenges in Quantifying Tire Wear Particle Emissions on an Outer Drum Test Bed
Researchers worked to develop reliable methods for measuring tire wear particle emissions on an outer drum test bed, a key challenge since tire wear is a major source of microplastics. They found that a degumming method using talcum powder increased wear rates to realistic levels but complicated particle measurements, requiring new techniques to distinguish tire particles from the powder. The study highlights the technical difficulties involved in accurately quantifying tire wear emissions for environmental assessment.
Microplastics in road dust: A practical guide for identification and characterisation
This paper provides a practical guide for identifying and characterizing microplastics found in road dust. Researchers reviewed current detection methods including spectroscopy and microscopy, and highlighted newer techniques that offer faster and more cost-effective analysis. The guide aims to help standardize how scientists study road dust microplastics, which primarily come from tire wear and plastic litter breakdown.
Development of a parametrized and regionalized life cycle inventory model for tire and road wear particles
Researchers developed a detailed model for estimating tire and road wear particle emissions, a major but often overlooked source of microplastics from vehicle traffic. The model accounts for nine key factors including road texture, driving behavior, temperature, and tire type, and can generate estimates at both individual vehicle and national scales. The study found that road surface roughness, aggressive driving, and wet conditions are the biggest drivers of large particle emissions, while temperature and vehicle load most affect fine particle release.
What is known and unknown concerning microplastics from tyre wear?
This review synthesizes current knowledge on tyre wear particles (TWPs) as a major source of road-traffic microplastics, covering how particle generation, transport pathways, and environmental fate depend on tyre composition, road characteristics, and weather. A key finding is that while TWPs can be identified in environmental samples, quantifying them precisely remains difficult and expensive—a gap that must be closed to accurately assess human and ecological exposure.
Car and truck tire wear particles in complex environmental samples – A quantitative comparison with “traditional” microplastic polymer mass loads
Researchers extended an existing Py-GC/MS method to include tire wear particles (TWP) alongside conventional microplastics in North Sea samples, finding that TWP represent a dominant mass fraction of environmental MPs often excluded from polymer-based surveys.