We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Characteristics of Vehicle Tire and Road Wear Particles’ Size Distribution and Influencing Factors Examined via Laboratory Test
AI summary Read the abstract
Researchers conducted laboratory tests to characterize the size distribution of tire and road wear particles under various conditions. The study found that factors such as driving speed, tire composition, and road surface characteristics significantly influence the size and quantity of wear particles released, which are a growing source of microplastic pollution.
With the implementation of strict emission regulations and the use of cleaner fuels, there has been a considerable reduction in exhaust emissions. However, the relative contribution of tire wear particles (TWPs) to particulate matters is expected to gradually increase. This study conducted laboratory wear experiments on tires equipped on domestically popular vehicle models, testing the factors and particle size distribution of TWPs. The results showed that the content of tire wear particle emission was mainly ultrafine particles, accounting for 94.80% of particles ranging from 6 nm to 10 μm. There were at least two concentration peaks for each test condition and sample, at 10~13 nm and 23~41 nm, respectively. The mass of TWP emission was mainly composed of fine particles and coarse particles, with concentration peaks at 0.5 μm and 1.3–2.5 μm, respectively. Both the number and mass of TWPs exhibited a bimodal distribution, with significant differences in emission intensity among different tire samples. However, there was a good exponential relationship between PM10 mass emissions from tire wear and tire camber angle. The orthogonal experimental results showed that the slip angle showed the greatest impact on TWP emission, followed by speed and load, with the smallest impact from inclination angle.
More Papers Like This
On-Road Vehicle Measurement of Tire Wear Particle Emissions and Approach for Emission Prediction
AI summary Read the abstract
An instrumented measurement vehicle was developed to quantify tire wear particle emissions under real-world on-road conditions, identifying key driving parameters such as speed, load, and cornering that govern emission rates. The study supports the development of emission factors and regulatory standards for non-exhaust tire-derived microplastic pollution.
Investigation of physical and chemical properties of particulate matter caused by vehicle tire wear
AI summary Read the abstract
Researchers characterized the physical and chemical properties of submicron tire wear particles generated from vehicle use on roadways. Using advanced analytical techniques, they identified the elemental composition and morphological structure of these particles, finding notable concentrations of metals and heavy metals. The study highlights that tire wear particles are a significant source of microplastic and chemical pollution with potential implications for human health and the environment.
Realistic evaluation of tire wear particle emissions and their driving factors on different road types
AI summary Read the abstract
This study measured tire wear particle (TWP) emissions under realistic driving conditions on different road types and identified the key driving factors affecting emission rates. Tire wear particles are a major category of microplastic pollution in road runoff, and this data is needed to estimate their contribution to environmental contamination.
Types and concentrations of tire wear particles (TWPs) in road dust generated in slow lanes.
AI summary Read the abstract
Road dust samples collected near traffic lights contained tire wear particles (TWPs), with the concentration and size distribution varying by location and traffic direction. Tire wear is one of the largest sources of microplastic pollution in urban environments, and these particles are carried into waterways by stormwater runoff.
Analytical Investigation of Tire Induced Particle Emissions
AI summary Read the abstract
This automotive engineering study measured the size distribution of fine dust particles (under 10 micrometers) generated by tire wear, finding that tire-derived particles represent a significant non-exhaust source of urban particulate matter. As electric vehicle adoption reduces exhaust emissions, tire and brake wear particles will become a proportionally larger component of urban air pollution. These tire wear particles are also a major source of microplastic contamination in road runoff.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.