We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Various Digestion Protocols Within Microplastic Sample Processing—Evaluating the Resistance of Different Synthetic Polymers and the Efficiency of Biogenic Organic Matter Destruction
Summary
Multiple organic matter digestion protocols used in microplastic sample preparation were systematically evaluated for their effectiveness in removing biogenic material while preserving plastic particles. The review helps standardize sample processing by identifying which digestion chemicals and conditions work best for different environmental matrices.
The digestion of biogenic organic matter is an essential step of sample preparation within microplastic analyses. Organic residues hamper the separation of polymer particles especially within density separation or polymer identification via spectroscopic and staining methods. Therefore, a concise literature survey has been undertaken to identify the most commonly applied digestion protocols with a special focus on water and sediments samples. The selected protocols comprise different solutions, concentrations, and reaction temperatures. Within this study we tested acids (nitric acid and hydrochloric acid), bases (sodium hydroxide and potassium hydroxide), and oxidizing agents [hydrogen peroxide, sodium hypochlorite and Fenton's reagent (hydrogen peroxide 30% in combination with iron(II)sulfate 0.27%)] at different concentrations, temperature levels, and reaction times on their efficiency of biogenic organic matter destruction and the resistance of different synthetic polymers against the applied digestion protocols. Tests were carried out in three parallels on organic material (soft tissue—leaves, hard tissue—branches, and calcareous material—shells) and six polymers (low-density polyethylene, high-density polyethylene, polypropylene, polyamide, polystyrene, and polyethylene terephthalate) in two size categories. Before and after the application of different digestion protocols, the material was weighed in order to determine the degree of digestion efficiency and polymer resistance, respectively. The efficiency of organic matter destruction is highly variable. Calcareous shells showed no to very low reaction to oxidizing agents and bases, but were efficiently dissolved with both tested acids at all concentrations and at all temperatures. Soft and hard tissue were most efficiently destroyed by sodium hypochlorite. However, the other reagents can also have good effects, especially by increasing the temperature to 40–50°C. The additional temperature increase to 60–70°C showed a further but less effective improvement, compared to the initial temperature increase. The resistance of tested polymer types can be rated as good except for polyamide and polyethylene terephthalate. Increasing the concentrations and temperatures, however, results in accelerated degradation of all polymers. This is most evident for polyamide and polyethylene terephthalate, which show losses in weight between 15 and 100% when the digestion temperature is increased. This effect is most pronounced for polyamide in the presence of acids and for polyethylene terephthalate digested with bases. As a concluding recommendation the selection of the appropriate digestion method should be specifically tested within initial pre-tests to account for the specific composition of the sample matrix and the project objectives.
Sign in to start a discussion.
More Papers Like This
Identifying a quick and efficient method of removing organic matter without damaging microplastic samples
Researchers compared common organic-matter digestion protocols used before microplastic detection, finding significant variation in removal efficiency and polymer damage, and recommending optimized methods to avoid underestimating microplastic counts.
Comprehensive assessment of various digestion protocols for extraction microplastics from organic-rich environmental matrices
Researchers tested 27 different chemical protocols for extracting microplastics from organic-rich samples like animal tissue, plants, soil, and sewage sludge. They identified the best digestion method for each sample type that removes organic matter while preserving the integrity of 26 different plastic types. The optimized protocols achieved recovery rates above 98%, offering a standardized approach for more accurate microplastic analysis across different environmental samples.
Developmentof Standardized Methods to Extract andDigest Microplastics in Environmental Samples
Researchers reviewed and compared extraction and digestion methods for isolating microplastics from environmental samples, finding that the lack of standardization across techniques is a major barrier to producing comparable results and calling for validated universal protocols.
Development of Standardized Methods to Extract and Digest Microplastics in Environmental Samples
Researchers tested 72 combinations of chemical extraction and digestion methods to find approaches that accurately recover microplastics from environmental samples without damaging them. They found that different density separation solutions and digestion reagents can significantly alter the physical and chemical properties of certain plastic types, particularly PET and polystyrene. The study provides practical guidance for selecting methods that preserve microplastic integrity during laboratory analysis.
Evaluation and optimisation of sample preparation protocols suitable for the analysis of plastic particles present in seafood
Ten digestion protocols for extracting microplastics from seafood were compared across a broad range of species, evaluating their ability to fully digest tissue without damaging polymer integrity, providing a basis for selecting suitable methods for human exposure assessment.