We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Contamination and removal efficiency of microplastics and synthetic fibres in a conventional drinking water treatment plant in Geneva, Switzerland
AI summary Read the abstract
Researchers evaluated microplastic removal efficiency at a large drinking water treatment plant in Geneva, finding that conventional treatment processes effectively reduced microplastic and synthetic fiber concentrations from Lake Geneva source water.
Although it is known that freshwater resources are contaminated with microplastics (MPs), still limited information is known about the efficiency of large drinking water treatment plants (DWTP) to remove microplastics. Moreover, reported concentrations of MPs in drinking water variates from some units to thousands of units per litre and the sampling volumes used for MPs analysis are generally heterogeneous and limited. The present study evaluates the removal of MPs and synthetic fibres in the main DWTP of Geneva, Switzerland, by considering large sampling volumes at different time intervals. Furthermore, contrary to other studies, this DWTP does not count with a clarification process before sand filtration and coagulated water is sent directly to sand filtration. In this study a distinction is made between microplastics as fragments, films, pellets, and synthetic fibres. Raw water and effluents of each filtering mass (sand and activated carbon filtration) are analysed for the presence of MPs and synthetic fibres with sizes ≥63 μm using infrared spectroscopy. Concentrations of MPs in raw water range from 25.7 to 55.6 MPs/m3 and in treated water from 0 to 4 MPs/m3, respectively. Results show that 70 % of MPs are retained during sand filtration and total removal is equal to 97 % in treated water after activated carbon filtration. Concentration of identified synthetic fibres is low (average value of 2 synthetic fibres/m3) and constant in all steps of water treatment. Chemical composition of microplastics and synthetic fibres is found more heterogeneous in raw water than after sand filtration and activated carbon filtration, indicating the persistence of some types of plastics (like polyethylene and polyethylene terephthalate) in water treatment processes. Heterogeneities in MP concentrations are observed from one sampling campaign to another, indicating significant variations of MP concentrations in raw water.
More Papers Like This
Contamination and Removal Efficiency of Microplastics and Synthetic Fibres in a Conventional Drinking Water Treatment Plant
AI summary Read the abstract
Researchers found that a conventional drinking water treatment plant in Geneva removed the majority of microplastics from raw water, with coagulation and sand filtration contributing most to removal, though some particles persisted through to finished drinking water.
Conventional and biological treatment for the removal of microplastics from drinking water
AI summary Read the abstract
Researchers examined microplastic removal by a full-scale drinking water treatment plant, finding that conventional coagulation-flocculation-filtration processes and biological filters with granular activated carbon effectively reduced microplastic concentrations in treated water.
Detection and Occurrence of Microplastics through Municipal and Pilot-scale Drinking Water Treatment Plants
AI summary Read the abstract
Researchers developed a new method for detecting and characterizing microplastics in drinking water samples from municipal and private treatment systems. They found microplastics in treated drinking water, though at lower concentrations than in source water, and identified fibers as the most common type. The study demonstrates that conventional water treatment does not completely remove microplastics from drinking water.
Microplastic removal across ten drinking water treatment facilities and distribution systems
AI summary Read the abstract
Researchers characterized microplastic removal across ten drinking water treatment facilities and found that conventional municipal treatment achieved greater than 97.5% removal, primarily through granular media filtration or ultrafiltration. Untreated source waters contained between approximately 1,200 and 7,200 microplastic particles per liter, with polypropylene, polyethylene, and polyamide being the most common types. The findings provide valuable data on microplastic exposure through drinking water and the effectiveness of existing treatment processes.
Microplastic occurrence after conventional and nanofiltration processes at drinking water treatment plants: Preliminary results
AI summary Read the abstract
Researchers detected microplastics in source river water and finished drinking water at three treatment plants in the Paris region, finding that standard treatment steps including coagulation-flocculation and sand filtration reduced but did not eliminate MPs. Nanofiltration achieved higher removal rates, suggesting advanced filtration is needed for near-complete MP removal from drinking water.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.