0
Article ? AI-assigned paper type based on the abstract. Classification may not be perfect — flag errors using the feedback button. Tier 2 ? Original research — experimental, observational, or case-control study. Direct primary evidence. Detection Methods Nanoplastics Remediation Sign in to save

Pb(II) Uptake from Polluted Irrigation Water Using Anatase TiO2 Nanoadsorbent

Molecules 2023 9 citations ? Citation count from OpenAlex, updated daily. May differ slightly from the publisher's own count. Score: 40 ? 0–100 AI score estimating relevance to the microplastics field. Papers below 30 are filtered from public browse.
Miguel A. Vasquez-Caballero, Yamerson Canchanya-Huaman, Angie F. Mayta-Armas, Jemina Pomalaya-Velasco, Noemi‐Raquel Checca‐Huaman, Yéssica Bendezú-Roca, Juan A. Ramos‐Guivar

Summary

This paper is not about microplastics; it examines the use of titanium dioxide nanoparticles to remove lead (Pb) from irrigation water, achieving over 99% removal efficiency.

The adsorption characteristics of titanium dioxide nanoparticles (nano-TiO2) for the removal of Pb(II) from irrigation water were investigated in this work. To accomplish this, several adsorption factors, such as contact time and pH, were tested to assess adsorption efficiencies and mechanisms. Before and after the adsorption experiments, commercial nano-TiO2 was studied using X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM and TEM), energy dispersive spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The outcomes showed that anatase nano-TiO2 was remarkably efficient in cleaning Pb(II) from water, with a removal efficiency of more than 99% after only one hour of contact time at a pH of 6.5. Adsorption isotherms and kinetic adsorption data matched the Langmuir and Sips models quite well, showing that the adsorption process occurred at homogenous sites on the surface of nano-TiO2 by forming a Pb(II) adsorbate monolayer. The XRD and TEM analysis of nano-TiO2 following the adsorption procedure revealed a non-affected single phase (anatase) with crystallite sizes of 9.9 nm and particle sizes of 22.46 nm, respectively. According to the XPS data and analyzed adsorption data, Pb ions accumulated on the surface of nano-TiO2 through a three-step mechanism involving ion exchange and hydrogen bonding mechanisms. Overall, the findings indicate that nano-TiO2 has the potential to be used as an effective and long-lasting mesoporous adsorbent in the treatment and cleaning of Pb(II) from water bodies.

Sign in to start a discussion.

More Papers Like This

Article Tier 2

Adsorption of Lead from Effluents Using Synthesized ZnO Nanoparticles: A Comprehensive Study for Wastewater Treatment

This paper is not about microplastics — it evaluates synthesized zinc oxide nanoparticles as an adsorbent for removing lead from contaminated water, addressing heavy metal pollution in wastewater treatment.

Article Tier 2

Green Synthesis and Characterization of Fe-Ti Mixed Nanoparticles for Enhanced Lead Removal from Aqueous Solutions

Researchers developed iron-titanium mixed oxide nanoparticles using an environmentally friendly synthesis method and tested their ability to remove lead from water. The nanoparticles achieved up to 98.1% lead removal efficiency and could be regenerated and reused for multiple treatment cycles. While not directly about microplastics, this green nanotechnology approach addresses the broader challenge of removing persistent contaminants from water.

Article Tier 2

Synthesis of Amorphous MnFe@SBA Composites for Efficient Adsorptive Removal of Pb(Ⅱ) and Sb(V) from Aqueous Solution

Researchers synthesized a new composite material by growing manganese-iron oxide on a porous silica support for removing lead and antimony from contaminated water. The material removed over 99 percent of lead and 80 percent of antimony within two hours and performed well even in the presence of other dissolved ions. While not directly related to microplastics, the study contributes to water purification technology that could complement plastic pollution cleanup efforts.

Article Tier 2

Conversion of the styrofoam waste into a high-capacity and recoverable adsorbent in the removing the toxic Pb(II) from water media

Researchers chemically modified waste styrofoam — a common plastic pollutant — into a magnetic adsorbent capable of removing toxic lead (Pb²⁺) ions from water, achieving around 90% removal efficiency. This work shows that plastic waste can be repurposed into useful water-treatment materials, offering a dual benefit of reducing plastic waste while cleaning heavy metal contamination.

Article Tier 2

Impact of Titanium Dioxide Nanoparticles on Agricultural Crops Performance: A Review of Efficacy and Mechanisms

This paper is not relevant to microplastics research; it reviews the effects of titanium dioxide nanoparticles on agricultural crop performance, focusing on photosynthesis enhancement and antimicrobial protection rather than plastic pollution.

Share this paper