We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Conversion of the styrofoam waste into a high-capacity and recoverable adsorbent in the removing the toxic Pb(II) from water media
Summary
Researchers chemically modified waste styrofoam — a common plastic pollutant — into a magnetic adsorbent capable of removing toxic lead (Pb²⁺) ions from water, achieving around 90% removal efficiency. This work shows that plastic waste can be repurposed into useful water-treatment materials, offering a dual benefit of reducing plastic waste while cleaning heavy metal contamination.
The sequential nitration and magnetization of waste styrofoam to form a novel adsorbent has been investigated. The novelty of this study assigned approach lies in the introduction of an anionic surface on the styrofoam, enabling it to adsorb cationic Pb2+ ion, combined with its magnetic property that facilitates rapid and practical recovery. The nitration was conducted using concentrated nitric acid in the presence of sulfuric acid, and the magnetization was performed by coprecipitation of Fe2+ and Fe3+ at high pH to form Fe3O4. The prepared adsorbents were characterized using Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), and Scanning Electron Microscope-Energy Dispersive X-ray (SEM-EDX) instruments. The characterization data clearly showed the evidence that nitrated-magnetic-styrofoam was successfully produced. The adsorption process of Pb2+ ion from aqueous media was evaluated via batch experiment. The contact time of the adsorption, adsorbent weight, solution pH, and initial concentration of Pb2+ were optimized to get the best adsorption condition. The adsorbent with 33.3 wt% of Fe3O4 fraction revealed a compromise of high adsorption effectivity around 90.0% and efficient separability with the optimum condition of 30 mg adsorbent dose at solution pH 6 within 60 minutes of adsorption time and initial concentration at 50 mg L-1 Pb2+. The parameters isotherm and kinetic of adsorptions were also determined. According to three simulated isotherm models of Langmuir, Freundlich, and Sips, Langmuir isotherm is well-fitted with an adsorption capacity of 9.81 mg g-1. The adsorption kinetic matches to a pseudo-second order giving an adsorption rate constant of 0.131 g mg-1 min-1 and is expected to give chemisorption mechanism.
Sign in to start a discussion.
More Papers Like This
Synthesis of polyvinyl chloride modified magnetic hydrochar for effective removal of Pb(II) and bisphenol A from aqueous phase: performance and mechanism exploration
Scientists created a new material by combining PVC plastic waste with corn straw and iron oxide to make a magnetic filter that can remove lead and bisphenol A from water. The material worked well across a wide range of water conditions and could be reused multiple times. While focused on water cleanup technology, this research shows how recycled plastic waste can be repurposed to help address water contamination, including pollutants often associated with microplastics.
Hypercrosslinked waste polycarbonate to remove heavy metal contaminants from wastewater
Researchers chemically modified waste polycarbonate plastic using a process called hypercrosslinking, turning it into a resin capable of efficiently removing lead and cadmium ions from contaminated water. The material achieved removal capacities around 160 mg per gram for both toxic metals, demonstrating that plastic waste can be repurposed as a tool for cleaning up heavy metal pollution.
Magnetically Separable Humic Acid-Chitin Based Adsorbent as Pb(II) Uptake in Synthetic Wastewater
Researchers synthesized a magnetic humic acid-chitin composite material to adsorb lead (Pb) from synthetic wastewater, achieving high removal efficiency. Magnetically separable adsorbents are being developed for removing microplastics and associated heavy metals from contaminated water.
Functionalization of Strontium Ferrite Nanoparticles with Novel Chitosan–Schiff Base Ligand for Efficient Removal of Pb(II) Ions from Aqueous Media
Researchers developed a new magnetic nanocomposite made from strontium ferrite and a chitosan-based compound to remove lead from contaminated water. The material achieved over 98% lead removal efficiency under optimized conditions and could be easily recovered using a magnet for reuse. This approach offers a promising, recyclable tool for cleaning up heavy metal pollution in water sources.
Valorization of Plastic Wastes for the Development of Adsorbent Designed for the Removal of Emerging Contaminants in Wastewater
This review examines how plastic waste can be converted into adsorbent materials for removing emerging contaminants from wastewater — turning a pollution problem into a remediation solution. The approach could simultaneously reduce plastic waste and improve wastewater quality, reducing the amount of pollutants reaching drinking water sources.