We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Effect of cold plasma pretreatment on biodegradation of high-density polyethylene (HDPE) and polystyrene (PS)
Summary
This study found that cold atmospheric plasma pretreatment of high-density polyethylene and polystyrene significantly increases surface wettability and promotes subsequent microbial biodegradation, suggesting plasma treatment as a practical strategy to accelerate plastic breakdown.
Abstract Cold atmospheric plasma (CAP) pretreatment of high-density polyethylene (HDPE) and polystyrene (PS) was investigated to evaluate its effect on biodegradation. Weight and wettability measurement, surface topography, and roughness analysis were examined for physical properties evaluation. Fourier-transform infrared spectroscopy (FT-TR) analysis was conducted to understand the possible chemical transformation. Based on biofilm formation, the highest microbial colonisation was observed on the sample treated with CAP pretreatment + biotreatment, which was 0.56 and 0.19 (at OD 595 nm) for HDPE and PS, respectively. A biodeterioration effect characterised by weight loss and changes of hydrophobicity in which hydrophobicity reductions of 5.1 ± 0.64% and 12° ± 0.35° were observed with the pretreated HDPE within 50 days, respectively. No physical weight loss was detected in the PS sample, but significant surface corrosion was observed. Atomic force microscopy (AFM) also showed a higher surface degradation of 10 and 35% for CAP pretreated HDPE and PS incubated with microorganisms compared to virgin samples incubated in the same condition. Moreover, chemical transformation indicated a new peak (C–O) in CAP-pretreated PE samples before and after 50 days of biodegradation. The experiments with virgin HDPE and PS demonstrated a positive effect of the pretreatment on the biodegradation process.
Sign in to start a discussion.
More Papers Like This
Significance of a Non-Thermal Plasma Treatment on LDPE Biodegradation with Pseudomonas Aeruginosa
Researchers treated low-density polyethylene (LDPE) plastic with non-thermal plasma to accelerate its biodegradation by Pseudomonas bacteria, achieving measurable weight loss that was not seen in untreated plastic. This approach could help address the environmental persistence of LDPE, one of the most common plastics that fragments into microplastics.
Characteristics of low-temperature plasma for activation of plastic-degrading microorganisms
Researchers optimized low-temperature plasma discharge conditions to activate plastic-degrading microorganisms without killing them, finding specific electrical frequency and pulse width settings that boosted microbial activity. This technique could accelerate biological plastic breakdown, offering a new tool in the fight against persistent microplastic pollution.
Low-Density Polyethylene Degradation and Energy Yield Using Dielectric Barrier Discharge under Various Electrical Conditions
Researchers used dielectric barrier discharge plasma to degrade low-density polyethylene plastic under varying electrical conditions, evaluating both degradation efficiency and energy yield. The approach offers a faster alternative to conventional plastic degradation methods for addressing microplastic pollution.
Polystyrene (PS) Degradation Induced by Nanosecond Electric Discharge in Air in Contact with PS/Water
Researchers assessed the degradation efficiency of polystyrene microplastics by nanosecond electric discharge in air in contact with water, evaluating plasma-based treatment as an alternative to conventional water treatment methods that fail to remove plastics. The study quantified polystyrene degradation and characterized breakdown products under different discharge conditions.
Complete degradation of polystyrene microplastics through non-thermal plasma-assisted catalytic oxidation
Researchers developed a two-stage non-thermal plasma system for degrading polystyrene microplastics at low temperatures. Using dielectric barrier discharge plasma coupled with a catalytic oxidation step, they achieved near-complete conversion of polystyrene particles to carbon dioxide within 60 minutes. The study demonstrates a promising technology for breaking down microplastic pollution without requiring high-temperature incineration.