We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Pyr-GC-Orbitrap-MS method for the target/untargeted analysis of microplastics in air
Summary
Researchers developed a pyrolysis-gas chromatography method coupled with Orbitrap mass spectrometry for detecting microplastics in air samples. The technique was optimized for ten common plastic polymers and achieved detection limits in the low microgram range. The study demonstrates that this analytical approach can identify both known and unknown plastic polymers in airborne particulate matter.
Pyrolysis-gas chromatography coupled to Orbitrap-mass spectrometry is a novel technique that allows the low level and precise determination of microplastics in environmental samples. In this paper, we develop and assess the target and untargeted performance of Pyr-GC-Orbitrap-MS. The method was optimized for 10 plastic polymers: polymethyl methacrylate, nylon-6,6, polypropylene, nitrile butadiene rubber, polyvinyl chloride, polyethylene terephthalate, acrylonitrile butadiene styrene, polyethylene, polycarbonate, and polystyrene. Standards were home-made using a diamond driller to attain mean sizes within the range of 45-382 µm. A step-by-step optimization of the analytical procedure was carried out. First, accurate mass measurement of each polymer at 60,000 resolution was studied to select the 3 most intense and selective quantification and confirmation ions. Second, internal standard quantification was optimized, and good linearity, repeatability, and reproducibility were obtained. Blank contribution and instrumental detection limit were evaluated for each polymer. Finally, the combined and expanded uncertainty of the Pyr-GC-Orbitrap-MS method was calculated to determine the sources of variation, considering that home-made standards were used. To evaluate method performance, targeted and non-targeted analysis of indoor air samples collected from gyms and department stores were carried out. The Pyr-GC-Orbitrap-MS methodology herein described can be applied for the quantitative assessment of MPs and other substances in different matrices.
Sign in to start a discussion.
More Papers Like This
Size-resolved identification and quantification of micro/nano-plastics in indoor air using pyrolysis gas chromatography-ion mobility mass spectrometry
A novel pyrolysis gas chromatographic cyclic ion mobility mass spectrometer method was developed to identify and quantify micro- and nanoplastics smaller than 1 micrometer in indoor air, finding four common plastic types in tested samples.
A Novel Strategy to Directly Quantify Polyethylene Microplastics in PM2.5 Based on Pyrolysis-Gas Chromatography–Tandem Mass Spectrometry
Researchers developed a new method using pyrolysis gas chromatography-tandem mass spectrometry to directly measure polyethylene microplastics in fine airborne particulate matter (PM2.5). This technique overcomes limitations of visual and spectroscopic methods that struggle to detect very small plastic particles in air samples. The study provides one of the first tools for accurately quantifying microplastics in PM2.5, helping researchers better understand the extent of airborne plastic pollution.
Microplastics analysis: can we carry out a polymeric characterisation of atmospheric aerosol using direct inlet Py-GC/MS?
Researchers tested pyrolysis gas chromatography-mass spectrometry for detecting polymer particles in atmospheric aerosol samples, proposing a novel method to calculate an organic baseline that accounts for interference from natural organic matter on filter samples.
Into the Nanograms─Sensitive Detection of Microplastics in Passively Sampled Indoor Air Using F-Splitless Pyrolysis Gas Chromatography Mass Spectrometry
Researchers developed a highly sensitive method for detecting airborne microplastics in indoor air at the nanogram level using advanced pyrolysis gas chromatography. The study suggests this technique can rapidly identify and quantify microplastics on air sampling filters with minimal preparation, making it easier for scientists to measure the scale of indoor microplastic exposure.
Optimization, performance, and application of a pyrolysis-GC/MS method for the identification of microplastics
Researchers optimized a pyrolysis-GC/MS method for identifying and quantifying microplastics in environmental samples, improving the reliability of polymer identification especially for small particles that are difficult to classify visually. The improved method is particularly valuable for analyzing the smallest microplastic size fractions that dominate by number in marine environments.