We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Properties of reclaimed polypropylene microplastic-polylactic acid blends
Summary
This study explored whether mixing reclaimed microplastic polypropylene with biodegradable PLA plastic could reduce environmental harm while preserving useful mechanical properties. The blends were tested in seawater and buried in soil to assess biodegradation, and a 90% PP / 10% PLA blend retained the highest tensile strength after seawater immersion. Higher PLA content accelerated biodegradation but reduced thermal stability and strength. The research offers a potential strategy for making recovered microplastic materials more environmentally manageable without sacrificing too much performance.
The prevalent presence of microplastics in marine environments poses major ecological risks requiring innovative approaches to their management and reduction. This study addresses a knowledge gap in biodegradable microplastic alternatives by looking at the biodegradability and properties of reclaimed microplastic polypropylene (PP) blended with polylactic acid (PLA). The study lies in the systematic exploration of various PP/PLA formulations, evaluating their potential for enhanced biodegradability without significantly compromising mechanical performance. Microplastic PP and PLA blends were prepared in various ratios using the melt blending method. The blend was characterized using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) to confirm the presence and morphology of the components. The mechanical properties were evaluated using tensile strength tests. A blend of 90% PP and 10% PLA was found to retain the highest tensile strength even after immersion in seawater. The thermal stability and degradation behavior were analyzed using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). This shows that increasing PLA content affects the thermal properties of the blends. Seawater immersion and soil burial tests were used to assess the biodegradability of the blends. The results showed that the blends’ biodegradation was confirmed by increases in conductivity and salinity in the seawater and weight loss in the soil burial. The major findings show that blending PP and PLA improves biodegradability while maintaining adequate mechanical properties. Tests including immersion in saltwater and soil burial were used to assess the biodegradability of the blends. The results showed that the blends’ biodegradation was confirmed by increases in conductivity and salinity in the seawater and weight loss in the soil burial. The major findings show that blending PP and PLA improves biodegradability while maintaining adequate mechanical properties. Finally, this study presents a new approach to reducing microplastic pollution through the blend of reclaimed PP with biodegradable PLA, resulting in a sustainable material with improved environmental performance. Future studies should look into new formulations, biodegradable polymers, and long-term degradation tests under a variety of environmental circumstances.
Sign in to start a discussion.
More Papers Like This
Towards sustainable plastics recycling: assessing the integrity status of polypropylene (PP) debris to recycle marine-degraded materials
Researchers assessed marine-degraded polypropylene (PP) debris from coastal environments using FTIR spectroscopy and tensile testing, classifying debris by integrity, then blending degraded PP with virgin PP to produce recyclable specimens that retain acceptable mechanical properties. The work shows that even environmentally weathered plastic — a significant source of microplastic fragments — can be recycled with quality outcomes, offering a route to reduce ongoing fragmentation.
The mitigation of the ghost nets threat by recycling of polypropylene: Blends, their ageing tests and spectral characterization
Researchers developed a method to recycle polypropylene plastic from abandoned fishing nets — a major source of ocean microplastics — by blending recycled fibers with fresh plastic and testing the resulting material in simulated seawater. The recycled blends held up as well as new plastic, suggesting ghost net recycling is a practical strategy to reduce marine microplastic pollution.
Photodegradation of biobased polymer blends in seawater: A major source of microplastics in the marine environment
Researchers investigated microplastic formation from the photodegradation of three biobased polymer blends -- non-biodegradable polyethylene/thermoplastic starch (PE/TPS) and polypropylene/thermoplastic starch (PP/TPS) blends, and biodegradable polylactic acid/thermoplastic starch (PLA/TPS) -- after exposure to seawater in simulated marine conditions. They found that photodegradation of these biobased blends generates microplastics and causes significant changes in physicochemical properties, identifying them as a potential source of marine microplastic pollution despite their eco-friendly positioning.
Behaviour of a self-reinforced polylactic acid (SRPLA) in seawater
Researchers tested whether a biodegradable plastic made from plant-based polylactic acid (PLA) holds up in seawater and whether it sheds microplastics. After 12 months at 40°C its strength fully degraded, but short-term UV exposure did not increase microplastic release — suggesting it needs engineering improvements before it can safely replace conventional marine plastics.
The Hydrolytic Behavior of Poly(Lactic Acid)/Polystyrene‐ Grafted‐Hectorite Nanocomposite Films and Its Regulatory Mechanism on Microplastics
Researchers tested how polylactic acid (PLA) films and PLA/hectorite nanocomposite films degrade in aqueous solutions of different pH levels. The nanocomposite films degraded more slowly and released fewer microplastic fragments than pure PLA, suggesting that clay mineral incorporation could reduce secondary microplastic generation from biodegradable plastics.