We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Transformation of waste carbon fiber prepreg into sustainable composites: Application in the automotive industry components
AI summary Read the abstract
Researchers converted waste carbon fiber prepregs from aerospace manufacturing into reinforced composites using recycled polypropylene from surgical masks, finding that the combination significantly improved mechanical properties including impact resistance and fracture toughness, with promising applications for automotive inner fender liners.
Abstract Carbon fiber (CF) prepregs are employed in the manufacture of many different aeronautical structural and non‐structural components. Following the cure of the prepregs in molds, trimming is generally used to give the final shape to the components. Considering the aircraft's vast surface area and the use of multiple prepreg layers in each component, an extensive amount of carbon fiber prepreg is discarded. The unique characteristics of carbon fibers render this CF waste highly valuable and requires its efficient recycling. Cured waste CF prepregs were milled and processed in this research to produce chopped carbon fibers for use in the novel composite development. The matrix material used in the composites was selected as recycled polypropylene sourced from old surgical masks, which highlighted the sustainability of the developed composites. To enhance the quality of the fiber‐matrix interface and improve the impact resistance of the composites an anhydride‐grafted polyethylene (Fusabond) was employed in small quantities. From mechanical characterizations, synergistic effects of the fillers were observed. Besides, compositions containing CF and Fusabond are found more impact resistant than neat matrix. In addition, the use of carbon fibers increased fracture toughness of the matrix through various mechanisms including fiber bridging, fiber pullout, and matrix plastic deformation identified by scanning electron microscopy fractography. Thermomechanical characterizations using dynamic mechanical analysis revealed that carbon fiber raises the neat matrix's glass transition temperature. The developed materials are intended to be employed in the automotive industry to produce inner fender liners, with an optimal composition determined by an optimization research. Highlights Carbon fiber (CF) derived from aerospace fresh scraps significantly improved the mechanical properties of the polymer matrix. Anhydride‐grafted polyethylene incorporation remarkably enhanced the impact resistance of the polymer. CF demonstrated a bridge effect and improved the fracture toughness of the composites. The use of recycled CF presents encouraging prospects in the automotive industry for the production of inner fender liners.
More Papers Like This
Carbon Fiber Reinforced Recycled Polypropylene/Polyolefin Elastomer Composites with High Mechanical Properties
AI summary Read the abstract
Researchers produced carbon fiber reinforced recycled polypropylene and polyolefin elastomer composites with enhanced mechanical properties, evaluating tensile strength, impact resistance, and fiber-matrix adhesion. Incorporating polyolefin elastomer improved toughness without substantially sacrificing stiffness, demonstrating a viable route to high-performance composites from recycled thermoplastics.
Recyclability and Embodied Energy of Advanced Polymer Matrix Composites
AI summary Read the abstract
This paper examines the recyclability and embodied energy of advanced polymer matrix composites used in aerospace and automotive applications. Improving recycling of carbon fiber composites prevents these materials from becoming persistent microplastic debris when components reach end of life.
Characterization of Hybrid FRP Composite Produced from Recycled PET and CFRP
AI summary Read the abstract
This paper is not about microplastics — it characterizes the mechanical properties of recycled carbon fiber composites made with PET plastic waste for structural applications.
Catalytic Disconnection of C–O Bonds in Epoxy Resins and Composites
AI summary Read the abstract
Researchers developed a catalytic method to break the carbon-oxygen bonds in fiber-reinforced epoxy composite materials, enabling recycling of both the polymer matrix and embedded fibers. Existing epoxy composites used in aerospace and automotive sectors cannot be recycled by conventional means. This chemical recycling approach addresses a major challenge in managing end-of-life composite waste.
Renforcement local de pièces plastiques recyclées des fibres continues pour des applications structurales à faible impact en C02/kg
AI summary Read the abstract
Researchers compared three processing methods — thermocompression, injection overmolding, and automated fiber placement — for locally reinforcing recycled polyamide 6 parts from fishing nets with continuous PA6-GF fiber ribbons, assessing mechanical properties and microstructural differences to support low-carbon structural applications.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.