We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Catalytic Disconnection of C–O Bonds in Epoxy Resins and Composites
Summary
Researchers developed a catalytic method to break the carbon-oxygen bonds in fiber-reinforced epoxy composite materials, enabling recycling of both the polymer matrix and embedded fibers. Existing epoxy composites used in aerospace and automotive sectors cannot be recycled by conventional means. This chemical recycling approach addresses a major challenge in managing end-of-life composite waste.
Abstract Fiber-reinforced epoxy composites are well established for load bearing applications in the aerospace, automotive and wind power industries, due to their light weight and high durability. These composites are based on thermoset resins, consisting of σ bond-based linkages and aromatic backbones, embedding glass or carbon fibers1. In lieu of viable recycling strategies, end-of-use composite-based structures such as wind turbine blades are commonly landfilled1-4. Due to the negative environmental impact of plastic waste5,6, the need for circular economies of plastics has become pressing7,8. However, recycling thermoset plastics is not trivial1-4. Here, we report a transition metal catalysed protocol for recovering the base chemical bisphenol A and fibers from thermoset epoxy resins. Our approach is based on disconnecting C(alkyl)–O bonds of the most common linkages of the polymer, using a ruthenium-catalysed dehydrogenation-bond cleavage-reduction cascade. We showcase the application of this methodology to relevant unmodified amine-cured epoxy resins as well as commercial composites, including the shell of a wind turbine blade. The high quality of the recovered fibers was confirmed using X-ray micro-computed tomography. Our results demonstrate that chemical recycling approaches for thermoset epoxy resins and composites are achievable. We anticipate that this study is a starting point for developing methodologies that hold the potential for establishing a circular economy for unmodified epoxy-based materials.
Sign in to start a discussion.
More Papers Like This
Catalytic disconnection of C–O bonds in epoxy resins and composites
Researchers developed a chemical recycling method using a ruthenium catalyst that can break down tough epoxy resins and recover their building blocks along with intact glass or carbon fibers from composites like wind turbine blades. This breakthrough addresses the plastic waste problem at its source by making it possible to recycle materials that currently end up in landfills, where they can fragment into microplastics.
Strategies towards Fully Recyclable Commercial Epoxy Resins: Diels–Alder Structures in Sustainable Composites
Researchers designed epoxy resins incorporating Diels-Alder reversible covalent bonds to enable chemical recycling at end of life, characterizing the thermomechanical properties of the resulting thermosets. The resins showed mechanical performance comparable to commercial epoxies while allowing near-complete depolymerization under mild heating, offering a pathway toward fully recyclable structural composites.
Recycling of Epoxy/Fiberglass Composite Using Supercritical Ethanol with (2,3,5-Triphenyltetrazolium)2[CuCl4] Complex
Researchers demonstrated that epoxy/fiberglass composite materials can be recycled via supercritical ethanol solvolysis, and that adding a copper chloride coordination compound reduces the required treatment time from ten hours to just two hours at 250°C while recovering glass fibers that retain 98% of their original strength.
Towards Sustainable Recycling of Epoxy-Based Polymers: Approaches and Challenges of Epoxy Biodegradation
This review examined current approaches and challenges for biodegrading epoxy-based polymers, highlighting the difficulty of recycling these widely used thermoset materials and exploring emerging biological and chemical strategies for more sustainable end-of-life management.
Precise activation of C–C bonds for recycling and upcycling of plastics
This perspective examines strategies for recycling and upcycling polyolefin plastics by precisely activating and cleaving the inert carbon-carbon bonds in plastic waste. Researchers surveyed catalytic approaches from related chemistry fields, including lignin degradation and alkane dehydrogenation, that could inspire new methods for breaking down plastics. The study highlights cross-disciplinary opportunities for developing more effective catalytic technologies to address the growing plastic waste crisis.