We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
61,005 resultsShowing papers similar to Direct On-Analyte Fabrication of Au Nanoparticles for Substrate-Free SERS Detection of Micro and Nanoplastics
ClearDirect On-AnalyteFabrication of Au Nanoparticlesfor Substrate-Free SERS Detection of Micro and Nanoplastics
Researchers developed a substrate-free SERS detection method using direct on-analyte fabrication of gold nanoparticles to identify micro- and nanoplastic particles at extremely low concentrations in complex environmental matrices. The approach leverages characteristic Raman fingerprints of plastic polymers without requiring conventional fixed substrates, enabling more flexible and sensitive detection.
Detection of Sub-Micro- and Nanoplastic Particles on Gold Nanoparticle-Based Substrates through Surface-Enhanced Raman Scattering (SERS) Spectroscopy
Gold nanoparticle-based SERS substrates were used to detect sub-micro and nanoplastic particles including polystyrene, PET, and PVC, demonstrating that this technique can identify plastic particles below the size threshold of conventional Raman microscopy.
The onset of surface-enhanced Raman scattering for single-particle detection of submicroplastics
Researchers demonstrated surface-enhanced Raman scattering (SERS) using gold nanourchins as a detection method for submicroplastic polystyrene particles at the single-particle level, addressing a critical monitoring gap for plastics smaller than 1 micrometer. The approach offers a promising analytical solution for detecting submicron and nanoplastics that conventional techniques cannot reliably quantify.
Development of Gold Nanostars Doped Flexible Substrate for Polystyrene Microplastic Detection Using Surface-enhanced Raman Scattering (sers)
Detecting microplastics in the environment requires fast, sensitive analytical tools, and this study developed a low-cost sensor using gold nanostars on a flexible substrate to detect polystyrene microplastics via surface-enhanced Raman scattering (SERS). The gold nanostar structures amplify the Raman signal of plastic particles, enabling detection at very low concentrations. This kind of portable, affordable detection technology could help expand microplastic monitoring beyond well-equipped research labs.
Identification of polystyrene nanoplastics using surface enhanced Raman spectroscopy
Researchers demonstrated for the first time that surface-enhanced Raman spectroscopy (SERS) using silver nanoparticles can identify polystyrene nanoplastics as small as 50 nm in real water samples, providing a rapid detection method that bypasses conventional sample preparation and could advance environmental monitoring of nanoplastics previously invisible to standard analytical techniques.
Breaking the Size Barrier: SERS-Based Ultrasensitive Detection and Quantification of Polystyrene Plastics in Real Water Samples
Researchers developed a surface-enhanced Raman spectroscopy (SERS) method capable of detecting and quantifying polystyrene plastic particles of various sizes — including nanoplastics — in real environmental water samples at ultrasensitive concentrations.
Sub-ppm-level detection of nanoplastics using au nanograting and application to disposable plasticware
A gold nanograting sensor using surface-enhanced Raman scattering (SERS) was able to detect polystyrene nanoplastics in water at concentrations as low as 0.1 parts per million — well below the detection limit of standard Raman systems — and was applied to detect nanoplastics leaching from a plastic bowl heated in a microwave. The sensor offers a pathway to rapid, sensitive detection of nanoplastics released from everyday plastic food containers. Knowing how much nanoplastic leaches from heated plasticware is directly relevant to human dietary exposure.
Advanced microplastic monitoring using Raman spectroscopy with a combination of nanostructure-based substrates
Researchers reviewed advances in Raman spectroscopy and surface-enhanced Raman scattering (SERS) — a technique that amplifies light signals using metallic nanostructures — for detecting micro- and nanoplastics at trace concentrations in environmental samples, highlighting new plasmonic materials, 3D substrates, and microfluidic chip platforms that enable on-site monitoring.
A Scalable Synthesis of Ag Nanoporous Film As an Efficient SERS-Substrates for Sensitive Detection of Nanoplastics
Researchers developed a new sensor using silver nanoparticles that can detect nanoplastics at very low concentrations using a technique called SERS (surface-enhanced Raman spectroscopy). The sensor could identify tiny polystyrene particles down to 50 nanometers in size. Better detection tools like this are essential for monitoring nanoplastic contamination in food and water, since current methods often miss the smallest and potentially most dangerous plastic particles.
Surface-enhanced Raman spectroscopy for the detection of microplastics
Researchers developed a surface-enhanced Raman spectroscopy method using gold nanoparticles to detect polystyrene microplastics at concentrations as low as 6.5 micrograms per milliliter, offering a new tool for detecting sub-micron plastic pollutants in water.
Submicron- and nanoplastic detection at low micro- to nanogram concentrations using gold nanostar-based surface-enhanced Raman scattering (SERS) substrates
This study developed gold nanostar-based surface-enhanced Raman scattering (SERS) substrates capable of detecting submicron- and nanoplastic particles at very low concentrations (micro- to nanogram per liter), filling a gap in analytical methods for the smallest plastic particles in complex matrices such as food and marine waters.
Nanostructured Raman substrates for the sensitive detection of submicrometer-sized plastic pollutants in water
Researchers developed nanostar-dimer-embedded nanopore substrates for surface-enhanced Raman scattering (SERS) and showed they can detect submicron polystyrene microplastic particles as small as 0.4 micrometers at concentrations of 50 ppm within minutes and without sample pretreatment, offering a sensitive and rapid analytical tool for detecting the smallest plastic pollutants in water.
Latest Advances and Developments to Detection of Micro‐ and Nanoplastics Using Surface‐Enhanced Raman Spectroscopy
This review examines the latest developments in using surface-enhanced Raman spectroscopy (SERS) to detect micro- and nanoplastics in various environmental samples. Researchers found that SERS offers significantly improved sensitivity compared to conventional methods, enabling detection of smaller plastic particles. The study suggests that SERS-based approaches hold promise for advancing nanoplastic detection, though challenges around standardization and reproducibility remain.
Selective Labeling of Small Microplastics with SERS-Tags Based on Gold Nanostars: Method Optimization Using Polystyrene Beads and Application in Environmental Samples
Researchers developed a novel method using gold nanostar-based SERS tags to selectively label and rapidly detect small microplastics on environmental sample filters. The technique reduced analysis time by roughly two orders of magnitude compared to conventional micro-Raman spectroscopy methods. The approach was validated on both fabricated and real marine samples, offering a promising tool for faster microplastic monitoring in environmental studies.
Strategies and Challenges of Identifying Nanoplastics in Environment by Surface-Enhanced Raman Spectroscopy
Researchers reviewed the use of surface-enhanced Raman spectroscopy (SERS) as a tool for detecting nanoplastics, which are plastic particles smaller than one micrometer. The study found that SERS offers high sensitivity for identifying individual nanoparticles, but significant challenges remain in applying this technique to complex environmental samples. The review outlines strategies for improving SERS-based nanoplastic detection to better assess environmental and health risks.
Superhydrophobic Surface-Enhanced Raman Spectroscopy (SERS) Substrates for Sensitive Detection of Trace Nanoplastics in Water
Researchers developed a new method to detect extremely small nanoplastics in water by combining a water-repelling surface that concentrates particles with a technique called SERS that amplifies their chemical signal. The method can identify common nanoplastics like polystyrene and PMMA at very low concentrations, which is an important step toward monitoring these tiny pollutants that are difficult to detect with current tools.
On-Site Detection of Nanoplastics in Liquid Phase by SERS Method
Researchers developed an on-site detection method for nanoplastics in liquid samples using surface-enhanced Raman spectroscopy (SERS), achieving sensitive identification without the laboratory infrastructure required by conventional GC-MS approaches. The SERS method successfully differentiated nanoplastic types in environmental water samples, offering a practical tool for rapid field-deployable nanoplastic monitoring.
Detecting polystyrene nanoplastics using filter paper-based surface-enhanced Raman spectroscopy
Researchers developed a filter paper-based surface-enhanced Raman spectroscopy (SERS) method for detecting polystyrene nanoplastics, achieving a detection limit of 10 μg/mL using gold nanoparticles deposited on filter paper with only 50 μL sample volume.
Hetero-charge-based surface enhanced Raman spectroscopy: An in situ rapid detection strategy for real marine nanoplastics
Researchers developed an in situ SERS detection method using oppositely charged gold nanoparticles to capture and identify nanoplastics directly in seawater without filtration or drying, achieving a detection limit of 0.1 µg/mL in artificial seawater and successfully identifying polystyrene in a real marine sample.
Portable surface-enhanced Raman scattering platform for rapid identification of nanoplastics at single-particle level
Researchers developed a portable, gold-nanoparticle-coated paper substrate for surface-enhanced Raman scattering (SERS) that detects individual plastic particles down to 1 part per trillion, enabling rapid field identification of polystyrene and nylon nanoplastics released from food containers and teabags without laboratory equipment.
Hydrophobicity-driven self-assembly of nanoplastics and silver nanoparticles for the detection of polystyrene microspheres using surface enhanced Raman spectroscopy
Researchers developed a highly sensitive method for detecting nanoplastic particles using surface-enhanced Raman spectroscopy (SERS) on a super-hydrophobic (water-repelling) surface that concentrates the particles into a small spot. The technique detected polystyrene nanoplastics at concentrations as low as 0.5 mg/L, far below what conventional approaches can achieve. Better detection tools for nanoplastics are urgently needed since these ultra-small particles are the hardest to find yet potentially the most biologically hazardous fraction of plastic pollution.
Meniscus‐Confined 3D Printed Nanoparticles: A Comparative Study of Quantitative SERS Detection of Microplastics
Detecting microplastics accurately in environmental samples is technically challenging, and this study introduces a new approach using 3D-printed silver and gold nanoparticle surfaces that amplify the light signal from microplastics when analyzed by Raman spectroscopy. Both types of printed substrates could detect plastic particles at concentrations as low as 0.3–1.2 micrograms per milliliter, with high reproducibility across dozens of repeated measurements. This technology could make routine, sensitive microplastic monitoring faster and more practical for environmental agencies and researchers.
Efficient silver-based hybrid nano-assemblies for polystyrene nanoparticles SERS detection
Researchers built nanoscale silver-silicon hybrid platforms that can detect polystyrene nanoplastics using a technique called surface-enhanced Raman spectroscopy. The platforms achieved high sensitivity with detection limits in the microgram-per-milliliter range. The technology offers a promising approach for identifying nanoscale plastic particles that are too small for conventional detection methods.
Trapping tiny pollutants: SERS-driven strategies for microplastics and nanoplastics detection
This review explores how surface-enhanced Raman spectroscopy (SERS) is being developed as a highly sensitive tool for detecting and identifying micro- and nanoplastics in environmental and biological samples. Researchers highlight recent advances in sensor design, the integration of machine learning for improved accuracy, and the technique's potential for real-world monitoring. The study also identifies key challenges, including signal variability and the lack of standardized methods, that need to be resolved for broader adoption.