We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
61,005 resultsShowing papers similar to Evaluation of Efficiently Removing Secondary Effluent Organic Matters (EfOM) by Al-Based Coagulant for Wastewater Recycling: A Case Study with an Industrial-Scale Food-Processing Wastewater Treatment Plant
ClearInvestigating the Potential of Coagulants to Improve Microplastics Removal in Wastewater and Tap Water
Researchers found that adding coagulants (FeCl3 or Al2(SO4)3) to wastewater and tap water improved microplastic removal, with aluminum sulfate achieving 43% and 62% removal efficiencies respectively, though the high concentrations required suggest that combining coagulants with organic polyelectrolytes could improve practicality.
Removal of microplastics from secondary wastewater treatment plant effluent by coagulation/flocculation with iron, aluminum and polyamine-based chemicals
Researchers tested iron, aluminum, and polyamine-based coagulants for removing small microplastics (<10 µm) from secondary wastewater treatment plant effluent, finding that coagulation-flocculation can remove a substantial fraction but that efficiency varies by chemical and particle size.
Microplastics removal from aquatic environment by coagulation: Selecting the best coagulant based on variables determined from a systematic review
This systematic review and experimental study identifies the most effective methods for removing microplastics from water using coagulation, a common water treatment technique. Researchers tested different coagulants on three types of microplastics and found that aluminum-based coagulants were most effective. These findings could help water treatment plants better remove microplastics from the water supply before it reaches our taps.
Microplastics and nanoplastics in water: Improving removal in wastewater treatment plants with alternative coagulants
Laboratory tests showed that conventional aluminum sulfate (alum) coagulant becomes much less effective at removing micro- and nanoplastics from water at pH above 7.8—a common condition in municipal wastewater—but switching to aluminum chlorohydrate largely restores removal efficiency. This matters because wastewater treatment plants are a critical barrier preventing microplastics from entering rivers and oceans, and many currently use alum. The study gives water utilities a practical, drop-in solution to significantly improve microplastic capture under challenging water chemistry.
The removal of microplastics from water by coagulation: A comprehensive review
This review comprehensively examined coagulation as a technology for removing microplastics from drinking water and wastewater treatment plants, analyzing the mechanisms, influencing factors, and effectiveness of different coagulants for microplastic removal.
The study of the effectiveness of coagulants and white sludge in the process of dephosphotation of municipal wastewater
This technical study tested different coagulants for removing phosphorus from municipal wastewater, finding that aluminum-based coagulants were most effective. While focused on nutrient removal rather than microplastics, improved wastewater treatment is relevant to reducing overall water pollution.
Coagulation of Wastewater Containing Polyethylene Terephthalate (PET) Microplastics by Using Ferric Chloride, Aluminum Sulfate and Aluminum Chlorohydrate: A Comparative Study
Researchers compared ferric chloride, aluminum sulfate, and aluminum chlorohydrate coagulants for removing PET microplastics from plastic recycling facility wastewater, finding that aluminum sulfate at pH 6 achieved the highest removal rate of 90% for predominantly fragment-shaped MPs in the 251-500 micrometers size range.
Enhancing microplastic removal from natural water using coagulant aids
Researchers tested different chemical treatments for removing microplastic beads from natural water and found that polyaluminium chloride combined with polyacrylamide achieved over 95% removal across six common plastic types. The treatment worked on particles ranging from 10 to 1,000 micrometers, and natural organic matter in the water actually improved performance. The findings suggest that optimizing standard water treatment processes could be a practical way to reduce microplastic contamination in drinking water sources.
The Effects of Microplastics on Floc Formation, Nutrient Removal and Settleability in Wastewater Treatment
Researchers investigated how microplastics affect floc formation, nutrient removal, and settleability in wastewater treatment systems, examining the mechanisms by which these ubiquitous anthropogenic pollutants entering via packaging, cosmetics, and other production sectors disrupt activated sludge processes.
Removal of most frequent microplastic types and sizes in secondary effluent using Al2(SO4)3: choosing variables by a fuzzy Delphi method
This study found that aluminum sulfate coagulation removed 72-99% of common microplastic types from secondary wastewater effluent, with removal efficiency varying by polymer type and particle size. Polyamide and polystyrene particles were removed most effectively, while polyethylene was more resistant, demonstrating that optimized coagulation can significantly reduce microplastic discharge from wastewater treatment plants.
The influence of coagulation process conditions on theefficiency of microplastic removal in water treatment
Researchers investigated how coagulation process conditions — including coagulant type, pH, and microsand addition — affect the removal of polyethylene, PVC, and textile microfibers from river water, municipal wastewater, laundry effluent, and synthetic matrices. Ferric chloride and polyaluminum chloride both achieved substantial removal, with performance varying significantly by water matrix and microplastic type.
Extraction and Quantification of Microplastics Contained Within Al, Fe and Ca Drinking Water Treatment Residuals
Researchers extracted and quantified microplastics from drinking water treatment residuals (DWTRs) dominated by aluminum, calcium, and iron compounds - byproducts of the water treatment process typically landfilled or applied as soil amendments. The study generated baseline data on microplastic occurrence in DWTRs to assess contamination risks associated with their beneficial reuse in soil and construction applications.
Efficient removal of microplastic particles from wastewater through formation of heteroagglomerates during the activated sludge process
Microplastic particles were efficiently removed from wastewater using a novel treatment process, demonstrating high removal rates across different plastic sizes and polymer types. The technology contributes to the toolkit for preventing microplastic discharge from wastewater treatment plants into receiving waters.
The Effects of Microplastics on Floc Formation, Nutrient Removal and Settleability in Wastewater Treatment
Researchers examined the interactions of microplastics with activated sludge in wastewater treatment plants, investigating effects on floc formation, nutrient removal efficiency, and settleability to understand how microplastic contamination may compromise treatment performance.
Assessment and Optimization of Coagulation Process in Water Treatment Plant: A Review
This review assessed coagulation processes in water treatment plants, examining how factors like coagulant type, dosage, pH, and mixing conditions can be optimized to improve removal of turbidity, organic matter, and emerging contaminants including microplastics.
Chemical Coagulation Applied for the Removal of Polyethylene and Expanded Polystyrene Microplastics
Researchers evaluated the use of aluminum sulfate-based coagulation and flocculation processes for removing polyethylene and expanded polystyrene microplastics from water. The study used factorial experimental designs to optimize treatment conditions including coagulant dosage and pH, demonstrating the potential of chemical coagulation as a microplastic removal strategy.
Microplastics and nanoplastics in water: Improving removal in wastewater treatment plants with alternative coagulants
Conventional water treatment plants that use alum as a coagulant become significantly less effective at removing microplastics and nanoplastics as water pH rises above 7.8, which is common in municipal wastewater. Switching to alternative coagulants — particularly aluminum chlorohydrate and cationic polyamine blends — maintained high removal rates at elevated pH, with nanoplastic removal reaching 71% and microfiber removal staying above 95%. The findings offer practical guidance for upgrading treatment plants to better capture plastic particles before they are discharged into waterways.
Behaviour of M. aeruginosa–Microplastic composite pollutants in coagulation and sludge storage
Microcystis aeruginosa extracellular polymers promoted adhesion of microplastics to algal flocs during coagulation, improving MP removal efficiency with polyaluminum chloride, while microplastics had opposite effects on algal removal depending on whether inorganic or organic coagulants were used.
Removal of microplastics from wastewater through electrocoagulation-electroflotation and membrane filtration processes
Researchers investigated electrocoagulation-electroflotation and membrane filtration for removing microplastics from wastewater, finding that combining these processes effectively recovers microplastic particles from treatment plant effluent.
Effectiveness of conventional municipal wastewater treatment plants in microplastics removal: Insights from multiple analytical techniques
Researchers evaluated the effectiveness of conventional municipal wastewater treatment plants in removing microplastics across multiple treatment stages, finding removal efficiencies of 70–90% but documenting that billions of particles still pass through in final effluent daily.
Microplastics removal from natural surface water by coagulation process
Researchers compared the effectiveness of ferrous and aluminum sulfate coagulants for removing microplastics from natural surface water, finding that both successfully removed polystyrene and polyvinyl chloride particles. Ferrous sulfate showed slightly higher removal efficiency, and the addition of coagulant aids further improved results. The study demonstrates that conventional coagulation processes already used in drinking water treatment can meaningfully reduce microplastic contamination.
Evaluation of Using Sequential Electrocoagulation and Chemical Coagulation for Urea Removal from Synthetic and Domestic Wastewater
Not relevant to microplastics — this study evaluates electrocoagulation and chemical coagulation techniques for removing urea from wastewater to prevent eutrophication, with no focus on plastic pollution.
Understanding and Improving Microplastic Removal during Water Treatment: Impact of Coagulation and Flocculation
Researchers systematically tested coagulation and flocculation for removing microplastics from drinking water, finding that removal efficiency depended strongly on plastic particle size and whether particles had been weathered, with smaller pristine particles being the hardest to remove.
Coagulation technologies for separation of microplastics in water: current status
This review examines how coagulation water treatment technologies can remove microplastics from water. Conventional coagulation achieves 8-98% removal efficiency while electrocoagulation achieves 8-99%, depending on conditions, offering a potentially effective approach for reducing microplastics in drinking water and wastewater.