We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
20 resultsShowing papers similar to Mechanistic vision on polypropylene microplastics degradation by solar radiation using TiO2 nanoparticle as photocatalyst
ClearAdvanced TiO2-based catalysts for polypropylene degradation in aquatic media
Researchers developed TiO2-based catalysts enhanced with zinc and cerium oxides to degrade polypropylene microplastics in water under UV light. The best-performing catalyst achieved roughly 6-8% degradation of microplastic surface area, with slightly lower effectiveness in wastewater compared to pure water. The study demonstrates a photocatalytic approach to breaking down one of the most common microplastics found in aquatic environments.
Unravelling the photocatalytic degradation of polyethylene microplastics with TiO2 under UV light: Evidence from kinetic studies
Researchers demonstrated that a titanium dioxide photocatalyst under UV light can break down polyethylene microplastics, achieving 34% mass loss in 8 hours and up to 54% over five treatment cycles. The process physically shrank the particles and chemically transformed them into simpler compounds like short-chain acids and carbon dioxide. While not yet ready for large-scale use, this technology could eventually help degrade microplastics in water treatment systems.
Investigation of the efficiency of several TiO2 microstructures for the photocatalytic degradation of nanoplastics.
Researchers tested the efficiency of multiple titanium dioxide microstructures for photocatalytic degradation of nanoplastics in aquatic environments, addressing the growing problem of sub-micron plastic fragments in global water systems. TiO2-based photocatalysis showed varying effectiveness depending on catalyst structure and particle properties.
First Insights into Photocatalytic Degradation of HDPE and LDPE Microplastics by a Mesoporous N–TiO2 Coating: Effect of Size and Shape of Microplastics
A nitrogen-doped titanium dioxide photocatalyst successfully degraded high-density and low-density polyethylene microplastics under visible light, with smaller particles showing greater degradation than larger ones or film-shaped particles. The study establishes a foundation for visible-light photocatalysis as a potential strategy for removing microplastics from water.
Microplastic Pollutant Degradation in Water Using Modified TiO2 Photocatalyst Under UV-Irradiation
This study tested modified titanium dioxide (TiO2) photocatalysts for their ability to degrade microplastic pollutants in water using light-driven oxidation. Modified TiO2 showed improved photocatalytic activity against microplastics compared to unmodified TiO2, which suffers from limited efficiency under visible light.
Photocatalytic degradation of polyethylene microplastics by copper-doped titanium dioxide nanoparticles
Researchers investigated photocatalytic degradation of polyethylene microplastics using copper-doped titanium dioxide nanoparticles as an efficient approach to breaking down aquatic plastic pollution, addressing the limitations of conventional removal methods that only achieve surface-level reduction.
Photodegradation of polyethylene debris in water by sulfur-doped TiO2: system optimization, degradation mechanism, and reusability
This study optimized the photodegradation of polyethylene bag debris in water using sulfur-doped titanium dioxide as a photocatalyst, finding that controlling pH, catalyst dose, and polyethylene concentration improved degradation efficiency. The results offer a promising approach for breaking down plastic waste in water environments.
TiO₂-based photocatalytic degradation of microplastics in water: Current status, challenges and future perspectives
This review examines how titanium dioxide-based materials can break down microplastics in water using light energy, generating reactive molecules that dismantle plastic polymer chains. While promising, the technology still faces challenges with efficiency and potential harmful byproducts, and more research is needed before it can be used at scale to clean microplastics from real-world water supplies.
Indirect daylight oxidative degradation of polyethylene microplastics by a bio-waste modified TiO2-based material
Researchers developed an innovative method to break down polyethylene microplastics using a titanium oxide-based material combined with biowaste, requiring only indirect daylight rather than direct UV or heat. The approach achieved measurable oxidative degradation of the chemically resistant plastic under ambient conditions. The study suggests this low-energy photocatalytic method could be a practical tool for treating microplastic pollution in environmental settings.
Synthesis and preliminary evaluation of Ag-TiO2/CNT hybrid nanocomposite for the degradation of polystyrene microplastics under solar irradiation
Researchers developed a new photocatalyst made from silver-doped titanium dioxide combined with carbon nanotubes to break down polystyrene microplastics using sunlight. In laboratory tests, the material achieved about 32% degradation of polystyrene microbeads within 48 hours under solar irradiation. The study offers a potentially cost-effective approach for removing microplastics from water using solar energy.
Degradation of Emerging Plastic Pollutants from Aquatic Environments Using TiO2 and Their Composites in Visible Light Photocatalysis
This review examines how titanium dioxide-based photocatalysts can degrade microplastics and nanoplastics under visible light conditions. Researchers found that while some composite materials achieved complete degradation of polystyrene particles, overall effectiveness remains limited at the laboratory scale. The study identifies key challenges and proposes future directions for developing more efficient photocatalytic approaches to plastic pollution remediation in water.
Photocatalytic Degradation and Remediation of Microplastics
This review chapter examines photocatalysis as a remediation strategy for microplastic pollution in aquatic and terrestrial environments, describing how solar energy conversion drives chemical reactions that degrade plastic particles. The authors assess the current state of photocatalytic methods, their mechanisms, and their potential for sustainable microplastic removal.
Investigation of the efficiency of several TiO2 microstructures for the photocatalytic degradation of nanoplastics.
This study tested the efficiency of several TiO2 microstructures as photocatalysts for degrading nanoplastics in aquatic environments. Results identified the most effective TiO2 configurations for breaking down sub-micron plastic fragments under light exposure.
TiO2-based photocatalysts for the degradation of microplastics in aquatic environments
Researchers synthesized TiO2-based photocatalysts via sol-gel and hydrothermal methods and characterized their morphology and photocatalytic properties for the degradation of microplastics in aqueous environments, optimizing catalyst formulations to improve efficiency and assessing their potential as an environmentally friendly advanced treatment for waterborne microplastic pollution.
Complete Photocatalytic Mineralization of Microplastic on TiO2 Nanoparticle Film
Scientists tested TiO2 nanoparticle films as a photocatalytic treatment for microplastics and found complete mineralization of polystyrene and polyethylene microspheres under UV irradiation, offering a potential destruction pathway for microplastic pollution.
Photocatalytic Decomposition of Microplastics with a Suspension of Titanium Dioxide Doped with Fullerenol-70
Researchers tested a titanium dioxide–fullerenol-70 photocatalytic suspension as a method for breaking down microplastics, finding it degraded up to 44% of nylon in a single day and outperformed plain titanium dioxide by up to 3× depending on polymer type. This offers a promising chemical approach to reducing microplastic concentrations in water without generating secondary pollutants.
Synthesizing a Ternary TiO 2 @g‐C 3 N 4 /UiO‐66 Photocatalyst From Waste Polyethylene Terephthalate Plastic to Treat Polystyrene Microplastics in Polluted Water
Scientists created a photocatalyst using recycled plastic bottles (PET) and used it to break down polystyrene microplastics in water under visible light, achieving 90% degradation within 30 hours. The approach cleverly uses plastic waste as both a raw material and a target, turning one pollution problem into a tool for solving another. This proof-of-concept suggests a potentially scalable method for removing microplastics from water using sunlight-driven chemistry.
Photocatalytic Degradation of Microplastics in Aquatic Environments: Materials, Mechanisms, Practical Challenges, and Future Perspectives
This review examines how light-activated materials called photocatalysts can break down microplastics in water into harmless byproducts using sunlight or UV light. While still facing challenges with incomplete breakdown and variable sunlight conditions, this technology offers a promising way to reduce microplastic contamination in water sources that affect human health.
Visible light photocatalytic degradation of HDPE microplastics using vanadium-doped titania
Researchers tested vanadium-doped titanium dioxide photocatalysts for degrading high-density polyethylene (HDPE) microplastics under visible light, finding that vanadium doping extended the photocatalytic response into the visible spectrum and enhanced degradation rates compared to undoped TiO2. The study advances solar-driven microplastic degradation as a potential remediation strategy.
Microplastic pollution reduction by a carbon and nitrogen-doped TiO2: Effect of pH and temperature in the photocatalytic degradation process
Scientists tested a carbon and nitrogen-doped TiO2 photocatalyst for degrading microplastics and found that degradation efficiency depended strongly on pH and temperature, with optimal conditions achieving significant surface mineralization of tested polymer types.