We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Papers
61,005 resultsShowing papers similar to Flow Raman Spectroscopy for the Detection and Identification of Small Microplastics
ClearMicroplastics Detection in Streaming Tap Water with Raman Spectroscopy
Researchers demonstrated that Raman spectroscopy can detect and identify microplastic particles in streaming tap water in real time, offering a rapid non-destructive method for monitoring plastic contamination in drinking water.
Study on Rapid Recognition of Marine Microplastics Based on Raman Spectroscopy
Researchers developed a rapid identification system for marine microplastics using Raman spectroscopy, enabling quick determination of plastic type and size. Fast, accurate identification tools are critical for monitoring the growing problem of microplastic pollution in ocean environments.
Using optimized particle imaging of micro-Raman to characterize microplastics in water samples
Researchers developed a micro-Raman automatic particle identification technique that can characterize microplastics in water samples up to 100 times faster than traditional point-by-point detection methods, while maintaining high precision for identifying polymer types, sizes, and morphologies.
Visualization and characterisation of microplastics in aquatic environment using a home-built micro-Raman spectroscopic set up
Researchers built an affordable micro-Raman spectroscopy system capable of identifying microplastics in water samples, offering a low-cost alternative to expensive commercial equipment. The system could visualize, measure, and chemically identify different types of microplastic particles. This kind of accessible detection technology is important, especially for developing countries, because widespread monitoring of microplastic pollution in water sources is essential for protecting public health.
Identification of Microplastics Using a Custom Built Micro-Raman Spectrometer
Researchers built a custom micro-Raman spectrometer and demonstrated its use for identifying microplastic polymer types in environmental samples, achieving sensitive and specific polymer identification at particle sizes down to a few micrometers.
Surface-Enhanced Raman Spectroscopy Facilitates the Detection of Microplastics <1 μm in the Environment
Researchers developed a method using surface-enhanced Raman spectroscopy to detect and identify individual microplastic particles smaller than one micrometer. This technique addresses a major gap in environmental monitoring, since most current methods cannot reliably detect the smallest microplastics that may pose the greatest risk due to their ability to enter cells and tissues.
Raman Tweezers for Small Microplastics and Nanoplastics Identification in Seawater
Researchers used Raman tweezers - optical tweezers combined with Raman spectroscopy - to capture and chemically identify individual small microplastic and nanoplastic particles in seawater samples in situ. This novel technique could enable real-time identification of the smallest plastic particles in marine environments, filling a critical gap in nano- and micro-plastic detection.
Identification of microplastics using Raman spectroscopy: Latest developments and future prospects
This review summarizes the latest advances in using Raman spectroscopy to identify microplastics in environmental samples, highlighting improvements in speed, sensitivity, and the ability to characterize plastic type and surface chemistry.
Microfluidic Detection and Analysis of Microplastics Using Surface Nanodroplets
Researchers developed a microfluidic device that uses tiny surface droplets to capture and analyze microplastics as small as 10 micrometers from water samples. The captured particles can be examined under a microscope and identified by type using Raman spectroscopy without removing them from the device. The method offers a simpler, faster, and more affordable way to detect small microplastics compared to conventional filtration techniques.
Quantitative Raman analysis of microplastics in water using peak area ratios for concentration determination
Researchers developed a new method using Raman spectroscopy to measure microplastic concentrations in water. By analyzing the ratio of plastic-specific signals to the water signal, they created a reliable calibration model for detecting polyethylene and PVC microplastics, even when multiple plastic types are mixed together. This approach could make it faster and easier to monitor microplastic contamination in real-world water sources.
Flow Plastometry of Microplastics Using Optical Line Tweezers
Researchers developed a novel system using Raman spectroscopy combined with optical line tweezers to simultaneously analyze the shape and chemical composition of microplastics flowing through a channel. The technique can capture and characterize particles as small as 500 nanometers, offering a potential tool for real-time monitoring of microplastics in water environments.
Microplastic identification using Raman microsocpy
Researchers developed and implemented a Raman spectroscopy system for rapid detection and identification of microplastic particles on substrates. The system enables efficient chemical characterization of microplastics found across diverse environmental matrices including ocean, lakes, soil, beach sediment, and human blood.
A critical analysis on the limits and possibilities of the μ-Raman as a routine method for microplastics determination in drinking water
This critical analysis examined the limits and practical possibilities of micro-Raman spectroscopy as a routine tool for microplastic identification, assessing throughput, detection limits, and the conditions under which it provides reliable polymer characterization.
Surface-enhanced Raman spectroscopy for the detection of microplastics
Researchers developed a surface-enhanced Raman spectroscopy method using gold nanoparticles to detect polystyrene microplastics at concentrations as low as 6.5 micrograms per milliliter, offering a new tool for detecting sub-micron plastic pollutants in water.
Rapid MicroplasticDetection Using High-ThroughputScreening Raman Spectroscopy
Researchers developed a high-throughput screening Raman spectroscopy system for rapid microplastic detection, overcoming the traditional tradeoff between spatial resolution, field of view, and analytical throughput to enable faster identification of plastic particles across environmental samples with low concentrations.
A beaker method for determination of microplastic concentration by micro-Raman spectroscopy
This study developed a faster way to measure microplastic concentrations in water by analysing Raman spectral signals directly in solution, skipping the laborious pre-treatment steps required by traditional methods. The concentration of polyethylene particles was found to correlate predictably with Raman signal intensity using a Langmuir model, enabling a simpler field-ready monitoring approach. Rapid detection tools like this are important for tracking microplastic contamination in drinking water and marine environments.
Fast Detection and Classification of Microplastics by a Wide-Field Fourier Transform Raman Microscope
Researchers developed a new wide-field Raman microscope that can rapidly detect and identify microplastic particles with high spatial and chemical accuracy. The instrument can image a large sample area in about 15 minutes and identify particles down to roughly one micrometer in size. The technology was validated on microplastics from seawater and biological samples, offering a faster alternative to existing detection methods.
Raman spectroscopy: Recent advances in fast and reliable microplastic analysis
This review summarized recent advances in Raman spectroscopy for fast and reliable microplastic identification, covering improvements in speed, sensitivity, and automation that are making the technique more practical for routine environmental monitoring. Raman-based methods are increasingly able to identify microplastics in complex environmental matrices including biological tissues.
Identification and visualisation of microplastics/nanoplastics by Raman imaging (i): Down to 100 nm
Researchers developed an advanced Raman imaging technique capable of identifying and visualizing nanoplastics down to 100 nanometers in size. The study addressed a key analytical gap, as nanoplastic research has been limited by the lack of effective characterization methods, and the new approach offers a way to detect these extremely small particles that may pose greater environmental risks due to their high surface area.
Tracking nanoplastics in drinking water: a new frontier with the combination of dielectrophoresis and Raman spectroscopy
Researchers developed a new combined technique using dielectrophoresis and Raman spectroscopy to detect and identify nanoplastics in drinking water. The method can trap and concentrate nanoplastic particles that are too small for conventional detection approaches, then chemically identify them. This advancement addresses a critical gap in our ability to monitor nanoscale plastic contamination in water supplies.
Identification of microplastics in a large water volume by integrated holography and Raman spectroscopy
A new technique combining holography and Raman spectroscopy was demonstrated to identify plastic pellets suspended in a large volume of water without physical contact. This non-destructive approach could enable real-time, in-water microplastic detection for environmental monitoring.
Rapid identification of micro and nanoplastics by line scan Raman micro-spectroscopy
Researchers developed a faster Raman spectroscopy tool for identifying microplastic particles by scanning a line rather than a single point at a time, improving imaging speed by 10 to 100 times over conventional methods. This allows the same chemical identification and size characterization of microplastics across large sample areas in a fraction of the time. Faster analysis methods are critical for processing the large numbers of samples needed in environmental monitoring programs.
Raman Microspectroscopy: Improvement in Signal Generation and Collection to Facilitate Raman Spectroscopy
Advances in Raman microspectroscopy were reviewed for improving signal generation and analysis in microplastic identification, including new detector designs and data processing algorithms. Enhanced Raman spectroscopy capabilities enable faster and more accurate polymer identification at smaller particle sizes.
Material identification and imaging of microplastics when dispersed in water using near-infrared light toward combination with a flow cell
Researchers developed a near-infrared (NIR) spectroscopy method for identifying and imaging microplastics in water without requiring drying, testing it on polyethylene, polypropylene, polystyrene, and polymethyl methacrylate particles. The method was designed to integrate with a flow cell for continuous measurement, enabling real-time microplastic identification in water samples.