0
Article Sign in to save

Achieving Environmental Sustainability by Reusing Low-Density Polyethylene in the Production of Bricks

AI summary Read the abstract

Researchers tested bricks made with low-density polyethylene (LDPE) plastic waste, finding that while LDPE-based bricks showed zero water absorption and met compressive strength minimums (1.2 N/mm²) for lightweight applications, their strength falls below conventional bricks, making them viable for non-load-bearing and eco-friendly construction.

Polymers

This study investigated the feasibility of reusing low-density polyethylene (LDPE) plastic waste in the production of bricks, aiming at achieving environmental sustainability. A quantitative research approach was employed in the study. The instruments used for data collection were compressive strength test and water absorption test. To ensure the consistency of the data used in this study, a reliability test was conducted using Cronbach’s Alpha with a reliability score of 0.78 obtained. To achieve the purpose of the study, data collected were analyzed using the statistical tools of R, Excel and Analysis of Variance (ANOVA) test was performed to determine statistical significance at 0.000 alpha level. The answer to the research questions showed that LDPE-based bricks exhibit superior water resistance, with zero water absorption, and a compressive strength of 1.2 N/mm², meeting the minimum standard for lightweight construction. Although their compressive strength is lower than conventional bricks, LDPE bricks demonstrate potential in non-load-bearing and eco-friendly construction applications. The results in this study support the broader narrative in the literature that advocates for the use of recycled plastics in construction, not only as a waste management solution but also as a step toward reducing the environmental footprint of the building sector.

More Papers Like This

Article Tier 2

Design of a methodology for the elaboration of ecological bricks incorporating low-density polyethylene

AI summary Read the abstract

Researchers in Mexico designed a methodology for producing ecological building bricks that incorporate low-density polyethylene (LDPE) plastic waste — the type found in plastic bags — which is very difficult to recycle through conventional means. The bricks met structural performance requirements while diverting plastic waste from landfills and the environment. Incorporating difficult-to-recycle plastics into construction materials offers a way to prevent them from fragmenting into microplastics in the environment.

Article

Optimisation of Ecobrick Density and Strength as a Building Material to Reduce Plastic Waste

AI summary Read the abstract

Researchers optimized ecobrick construction by testing PET bottles filled with compacted plastic waste at densities from 0 to 0.65 g/mL, finding that 0.45 g/mL density achieved compressive strength of 17.54 N/mm² and passed Malaysian building standards. Ecobricks offer a practical diversion pathway for plastic waste, preventing the environmental degradation that would otherwise release microplastics into soils and waterways.

Article Tier 2

Recycling of Polyethylene and Polypropylene Waste to Produce Plastic Bricks

AI summary Read the abstract

This paper is not primarily about microplastics — it tests whether recycled PE and PP plastic pellets can replace conventional materials in construction bricks, with a focus on mechanical performance rather than pollution impacts.

Article

Exploiting recycled plastic waste as an alternative binder for materials used in the construction industry

AI summary Read the abstract

This South African study investigated the feasibility of producing eco-friendly plastic-sand bricks from HDPE plastic waste and river sand, testing six sand-to-plastic ratios with Kaolin Clay DSF additions. Adding 5% Kaolin Clay significantly improved compressive strength from 21.4 MPa to 52.76 MPa in the 75:25 ratio, demonstrating that recycled plastic waste can serve as a viable construction material with improved mechanical and environmental properties.

Article Tier 2

Utilization of Plastic Waste for Developing Composite Bricks and Enhancing Mechanical Properties: A Review on Challenges and Opportunities

AI summary Read the abstract

This review of research on plastic waste composite bricks found that PET has the highest recycling efficiency among plastics used for brick production and highlights the need for standardized specifications, contamination assessments, and policy frameworks to promote wider adoption.

Research digests by email

When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.

Email me about

Share this paper