We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Optimisation of Ecobrick Density and Strength as a Building Material to Reduce Plastic Waste
AI summary Read the abstract
Researchers optimized ecobrick construction by testing PET bottles filled with compacted plastic waste at densities from 0 to 0.65 g/mL, finding that 0.45 g/mL density achieved compressive strength of 17.54 N/mm² and passed Malaysian building standards. Ecobricks offer a practical diversion pathway for plastic waste, preventing the environmental degradation that would otherwise release microplastics into soils and waterways.
Bricks are an essential material in construction, but the production has considerable environmental and health impacts. Consequently, ecobricks have emerged as a potential sustainable alternative to conventional bricks. These environmentally friendly substitutes are made by filling recycled polyethylene terephthalate (PET) plastic bottles with compacted plastic waste to a specific density. In this study, the optimum density of plastic waste in PET bottles was optimised to produce ecobricks with suitable strength properties. This innovation aimed to use plastic bottles as a building material and offers a sustainable alternative for the construction industry. Seven samples with a density of 0 g/mL to 0.65 g/mL were empirically tested for compressive strength, impact resistance, flexural strength, and failure behaviour. The findings revealed that Sample E exhibited the best performance compared to other samples. This sample achieved a compressive strength of 17.54 N/mm2, demonstrating strong structural performance. In the drop test (1 m, 2 m, and 3 m), Sample E also showed no visible denting, with a measured density (0.45 g/mL) exceeding 0.33 g/mL. It also recorded flexural strengths of 4.65 N/mm2 at the neck, 6.59 N/mm2 at the body and 11.96 N/mm2 at the bottom. These results not only exceed the minimum compressive strength for bricks (5.2 N/mm2) required by the Malaysian Public Works Department but also fulfil the Global Ecobrick Alliance guideline for minimum density (0.33 g/mL) of an ecobrick. In summary, this study helps to reduce the amount of plastic disposed of in landfills by reusing plastic waste as functional building materials. Most importantly, these findings support the United Nations Sustainable Development Goals (SDGs), specifically SDG 9 (Industry, Innovation and Infrastructure) by promoting the sustainable development of infrastructure through innovative materials and SDG 13 (Climate Action) by reducing the impact on the environment through the reduction of plastic waste.
More Papers Like This
Research on Properties of Ecobricks and its Possible Applications
AI summary Read the abstract
This study examined the properties of ecobricks — plastic bottles stuffed with non-recyclable waste — as a building material, finding they can partially substitute for conventional bricks while diverting plastic waste from landfills.
The Impact of Recycled Polyethylene Terephthalate as Aggregate Replacement on Mechanical and Ecotoxicological Properties of Mortar
AI summary Read the abstract
Researchers tested mortar made with recycled PET plastic replacing some of the natural aggregate and found that it maintained comparable compressive strength while passing ecotoxicity tests with plants. The study suggests that incorporating recycled plastic waste into construction materials could be a viable way to reduce plastic in landfills without creating significant environmental harm.
Polyethylene Terephthalate Waste Utilisation for Production of Low Thermal Conductivity Cement Sand Bricks
AI summary Read the abstract
This engineering study tested whether shredded PET plastic waste could partially replace sand in cement bricks, finding it reduced the bricks' thermal conductivity while maintaining acceptable strength. Incorporating plastic waste into construction materials could divert it from landfills while reducing building energy costs. This paper focuses on construction materials and is not directly related to microplastic health risks.
Sustainable geopolymers from polyethylene terephthalate waste and industrial by-products: a comprehensive characterisation and performance predictions
AI summary Read the abstract
Researchers developed geopolymer bricks using recycled PET plastic waste combined with industrial by-products like rice husk ash and blast furnace slag. They found that certain formulations produced bricks with strength and durability comparable to conventional building materials. The study demonstrates a practical approach for diverting plastic waste from landfills while creating sustainable construction materials.
Utilization of Plastic Waste for Developing Composite Bricks and Enhancing Mechanical Properties: A Review on Challenges and Opportunities
AI summary Read the abstract
This review of research on plastic waste composite bricks found that PET has the highest recycling efficiency among plastics used for brick production and highlights the need for standardized specifications, contamination assessments, and policy frameworks to promote wider adoption.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.