We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Using Lignin and Spent Coffee Grounds as Bio‐Additives in 3D ‐Printable Poly Lactic Acid/Multi‐Walled Carbon Nanotube Composites for Advanced Electronic Applications
AI summary Read the abstract
Researchers incorporated lignin and spent coffee grounds as bio-based additives into polylactic acid/carbon nanotube composites for 3D printing, finding that coffee grounds improved electrical conductivity by over 10-fold and enabled the fabrication of functional strain gauges with gauge factors up to 1.03, suitable for accelerometer applications.
ABSTRACT In this work, three bio‐based additives, lignin, spent coffee grounds (SCG), and oil extracted from SCG (Ox‐SCG) were proposed as dispersant agents for multi‐walled carbon nanotubes (MWCNT) in a polylactic acid (PLA) matrix. The resulting materials' microstructure, degradation, thermal stability, rheological behavior, mechanical performance, electrical conductivity, and suitability for 3D printing (fused granular fabrication) were analyzed. The incorporation of the additives significantly strengthened the conductive network, while improving the material interlayer adhesion, especially with SCG. The electrical conductivity increased from 0.2E −1 S/cm (PLA/MWCNT) to 2.6E −1 S/cm (PLA/MWCNT/SCG). After studying the physical–chemical properties of the materials, functional strain gauges with two‐ and three‐arm geometries were 3D printed with the best formulation (PLA/MWCNT/SCG). Gauge factors of 0.23 and 1.03 were achieved for the two‐ and three‐arm designs, respectively, demonstrating increased sensitivity with added complexity. Finally, a proof of concept for an accelerometer was developed using the half‐bridge strain gauge setup, integrated with a custom electronic acquisition system.
More Papers Like This
The study of degradation and mechanical properties of poly(lactic) acid (PLA) based 3D printed filament
AI summary Read the abstract
This study examined how soil burial and post-heat treatment affect the mechanical properties of 3D-printed PLA, finding that degradation occurred even in abiotic (sterile) soil conditions and that heat-induced crystallization caused a significant drop in strain from 7.33% to 4.28% within the first two weeks, highlighting how processing conditions substantially alter biodegradable plastic performance.
Thermal Degradation Analysis of Sustainable Recycled Saudi Coffee/PLA Bio-nanocomposites
AI summary Read the abstract
Researchers blended spent Saudi coffee grounds with polylactic acid bioplastic at varying ratios and analyzed thermal degradation, finding that coffee biomass acts as a biocatalyst accelerator that reduces PLA's thermal stability — potentially speeding end-of-life breakdown while generating a lignocellulosic char residue.
Additive manufacturing of materials with embedded electrically conductive paths and their applications
AI summary Read the abstract
Researchers developed a hybrid 3D printing technique that embeds carbon nanotube and carbon fiber thin films (buckypapers) into polymer composites layer-by-layer, producing smart materials capable of Joule heating down to -60°C and real-time damage detection through piezoresistive sensing.
Development of Biodegradable Straws Using Spent Coffee Grounds
AI summary Read the abstract
Researchers developed biodegradable drinking straws by combining spent coffee grounds with food-grade biopolymers including gelatin and starch, finding that rice starch formulations achieved the highest hardness while all straws fully dissolved in water within 24 hours, demonstrating a scalable, antioxidant-enriched alternative to single-use plastic straws.
Biodegradable Substrates for Rigid and Flexible Circuit Boards: A Review
AI summary Read the abstract
This review evaluates biodegradable materials including PLA, cellulose acetate, and polyvinyl alcohol as sustainable substrates for printed circuit boards, finding that while biopolymer-based boards show promise and reduced environmental impact in life cycle assessments, they currently fall short of the mechanical and thermal requirements for high-reliability electronics.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.