We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Additive manufacturing of materials with embedded electrically conductive paths and their applications
AI summary Read the abstract
Researchers developed a hybrid 3D printing technique that embeds carbon nanotube and carbon fiber thin films (buckypapers) into polymer composites layer-by-layer, producing smart materials capable of Joule heating down to -60°C and real-time damage detection through piezoresistive sensing.
Additive manufacturing has the potential to influence a broad array of engineering domains through its ability to create materials with tailored properties and functionalities. Although the capabilities to print fast, reliably, and with various materials have progressed dramatically in recent years, the aim of printing ‘smart’ materials has not yet been fully achieved. This work seeks to establish an alternative way of additive manufacturing polymer composites by embedding thin films containing carbon nanotubes and carbon fibre additives using a novel hybrid layer-by-layer deposition technique. The proposed 3D printer deposits a suspension of nanotubes in a liquid medium onto polymer substrates, which later self-assemble into a thin film known as a buckypaper. Short carbon fibres can be combined with suspended nanotubes to create hybrid buckypapers. Initially, a high number of buckypapers in a composite resulted in decreased interlaminar shear strength, most likely caused by delamination at the buckypaper-polymer interfaces. Thermoplastic (polyurethane) or thermoset (epoxy) binders were added to the suspensions to alleviate the bonding issue. After vacuum-bagging to melt or post-cure the binders, the porosity of 3D-printed composites was reduced from 4.8% to 0.5%. The weight fraction and type of binder modulated the microstructure of the hybrid buckypapers, as well as the resulting mechanical and electrical properties of the composites. Furthermore, chemical functionalization of the conductive fillers increased the adhesion between the constituents of hybrid buckypapers, as measured by interfacial shear strength testing.This approach preserved the design freedom and electrical properties of carbon nanotubes. Thus, the 3D-printed composites were used for out-of-autoclave post-processing by embedding resistive heaters inside the composite, which was then heated by Joule heating during vacuum-bagging. The Joule heating effect remained effective when the temperature of the environment was reduced to 0°C, -20°C, -40°C, and -60°C in a thermal chamber, generating over 100°C on the top surface in each case. The piezoresistive property of carbon nanotubes was used to detect damage during tensile, flexural, and impact testing. The location and shape of the 3D-printed conductive paths allowed for the detection of local or global damage inside the composite structure.Overall, this work lays the groundwork for the cost-effective incorporation of two-dimensional and three-dimensional conductive paths inside a polymer matrix of any size and shape. The composition, geometry, and location of these paths inside a printed material can be freely customized for a specific purpose. As a result, the method can be expanded in the future for various other applications, including energy and memory storage, photovoltaics, and chemical sensors, among many others.
More Papers Like This
Using Lignin and Spent Coffee Grounds as Bio‐Additives in 3D ‐Printable Poly Lactic Acid/Multi‐Walled Carbon Nanotube Composites for Advanced Electronic Applications
AI summary Read the abstract
Researchers incorporated lignin and spent coffee grounds as bio-based additives into polylactic acid/carbon nanotube composites for 3D printing, finding that coffee grounds improved electrical conductivity by over 10-fold and enabled the fabrication of functional strain gauges with gauge factors up to 1.03, suitable for accelerometer applications.
Waste to Value-Added Product: Developing Electrically Conductive Nanocomposites Using a Non-Recyclable Plastic Waste Containing Vulcanized Rubber
AI summary Read the abstract
Researchers demonstrated that non-recyclable plastic foam waste (vulcanized rubber and PVC) can be repurposed into electrically conductive nanocomposites when combined with carbon nanotubes and polystyrene, achieving up to 10,000-fold improvements in electrical conductivity compared to composites without the waste material due to a double percolation effect.
Synthesis Of Bio-Derived Carbon Reinforced LDPE Composite From Waste Plastic And Its Characterization For Possible Applications
AI summary Read the abstract
Researchers developed a composite material by incorporating activated carbon (AC) nanoparticles derived from coconut shells into low-density polyethylene (LDPE) via melt blending at varying ratios. The resulting composites showed reduced density alongside enhanced physical, thermal, and functional properties, with potential applications in environmental remediation and sustainable packaging.
Carbon-Supply-Programmed CNT Growth for Ultrathin Microwave Absorbers from Waste Batteries and Plastics
AI summary Read the abstract
Researchers combined waste lithium-ion battery materials and plastic (LDPE) through a heating process to grow carbon nanotubes, creating a lightweight material that absorbs microwave radiation. In lab tests, the resulting material and a textile made from it showed strong absorption performance, corrosion resistance, and flexibility, suggesting a way to reuse mixed waste materials.
Bimodal Cellular Structure Evolution in PBAT Foams Incorporated by Carbon Nanotubes and Graphene Nanosheets
AI summary Read the abstract
Researchers developed biodegradable PBAT polymer foams incorporating carbon nanotubes and graphene nanosheets using supercritical CO2 foaming, producing a bimodal cellular structure with enhanced melt viscoelasticity. Developing high-performance biodegradable foam alternatives addresses a key source of environmental microplastic pollution, as conventional polystyrene foams fragment into persistent particles that contaminate ecosystems.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.