We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Thermal desorption and analysis of atmospheric nanoplastics via PTR-MS
Summary
Scientists developed a new method to detect tiny plastic particles called nanoplastics in air and water by heating them up and analyzing the gases they release. This is important because nanoplastics are so small they can get into our bodies through the air we breathe and food we eat, but until now they've been very hard to measure. The new technique could help researchers better understand how much plastic pollution we're actually exposed to and its potential health effects.
Nanoplastics (NP) represent a global anthropogenic pollutant. Aerosolized NP enter the atmosphere and are eventually deposited in precipitation and surface waters, facilitating their entry into the food chain. Due to their small size, these particles can translocate within organisms and penetrate tissues and cells. While the health effects of environmental exposure levels remain poorly understood, the continuous increase in global concentrations is a growing concern. However, the characterization and analysis of aerosolized or deposited NP are analytically challenging.In this study, we present a newly developed low-volume thermal desorption (TD) solution that is directly interfaced to a proton-transfer-reaction mass-spectrometer (PTR-TOF 6000X2, IONICON Analytik GmbH, Austria) for real-time detection of volatile organic compounds at lowermost concentrations. The TD unit allows for precise temporal temperature control up to 400°C. These temperatures are sufficient to efficiently thermolyze a large fraction of common NP into PTR-MS detectable volatile organic compounds (VOCs). In most cases, the released VOCs serve as specific markers for plastic identification: for instance, styrene for polystyrene (PS), methyl methacrylate for polymethyl methacrylate (PMMA), and terephthalic acid for polyethylene terephthalate (PET). Polyvinyl chloride (PVC) is identified via aromatic compounds such as benzene and naphthalene, while polyethylene (PE) exhibits a characteristic homologous series of alkenes and alkanes.To validate this TD method, commercial monodisperse solutions of PS and PMMA were prepared with concentrations ranging from 0 to 60 ng in HPLC-grade water that was prefiltered through a 0.2 µm PTFE syringe filter. These samples were contained in precleaned headspace vials baked in a vacuum oven at 150°C and 10 mbar for >5 h to eliminate potential contaminants. After an evaporation step in a vacuum desiccator, the dry samples were heated in the TD unit and the thermolysis products were transferred in a controlled carrier gas (Air or N2) to the PTR-MS for quantitative analysis. Several replicates were prepared for each sample, along with laboratory blanks. Respective signals were integrated, and linear regressions were calculated. We achieved an R2 of 0.99 with a 3σ limit of detection (LOD) of 2.8 ng for PS, and an R2 of 0.98 with an LOD of 9.2 ng for PMMA.We further present initial results from samples containing deposited NP and explore data analysis methods based on matrix factorization.