We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
A new analytical approach for monitoring microplastics in marine sediments
Summary
Researchers developed a new analytical approach for monitoring microplastics specifically in marine sediments, improving extraction and identification steps to enable more reliable and standardized environmental monitoring of seafloor contamination.
A two-step method was developed to extract microplastics from sediments. First, 1 kg sediments was pre-extracted using the air-induced overflow (AIO) method, based on fluidisation in a sodium chloride (NaCl) solution. The original sediment mass was reduced by up to 80%. As a consequence, it was possible to reduce the volume of sodium iodide (NaI) solution used for the subsequent flotation step. Recoveries of the whole procedure for polyethylene, polypropylene (PP), polyvinyl chloride (PVC), polyethylene terephthalate (PET), polystyrene and polyurethane with sizes of approximately 1 mm were between 91 and 99%. After being stored for one week in a 35% H2O2 solution, 92% of selected biogenic material had dissolved completely or had lost its colour, whereas the tested polymers were resistant. Microplastics were extracted from three sediment samples collected from the North Sea island Norderney. Using pyrolysis gas chromatography/mass spectrometry, these microplastics were identified as PP, PVC and PET.
Sign in to start a discussion.
More Papers Like This
New techniques for the detection of microplastics in sediments and field collected organisms
Researchers developed new techniques for detecting microplastics in sediment samples and for collecting particles in the field, improving the reliability and sensitivity of methods used to monitor environmental microplastic contamination.
Comparative analysis of microplastics detection methods applied to marine sediments: A case study in the Bay of Marseille
This study compared multiple analytical methods for detecting and quantifying microplastics in marine sediment samples, evaluating extraction efficiency, polymer identification accuracy, and practical considerations for routine environmental monitoring.
Microplastic identification and quantification from organic rich sediments: A validated laboratory protocol
Researchers developed and validated a laboratory protocol for extracting, quantifying, and identifying microplastics from organic-rich sediments with fine grain sizes. The study addressed the challenge of analyzing microplastics in contamination hotspots like harbors and estuaries, where high organic content makes extraction difficult, and provided a cost-effective integrated method for more reliable environmental monitoring.
Microplastic in marine environment: reworking and optimisation of two analytical protocols for the extraction of microplastics from sediments and oysters
Researchers improved existing protocols for extracting microplastics from both marine sediments and oysters, making the NOAA protocol more versatile and extending it to PET extraction. Validated extraction methods are essential for producing consistent, comparable data on microplastic contamination in seafood.
Proposal for an initial screening method for identifying microplastics in marine sediments
Researchers developed a simplified screening protocol to identify microplastics in marine sediment samples, intended as a rapid initial method before more detailed analysis. Standardized screening protocols that are accessible to more laboratories are needed to expand global monitoring of microplastic sediment contamination.