We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Development of an optimal analytical protocol for the extraction of persistent organic pollutants adsorbed on plastic debris in the environment
AI summary Read the abstract
This conference presentation develops an optimal analytical protocol for extracting persistent organic pollutants adsorbed on plastic debris in the environment, supporting more accurate assessment of plastic-associated chemical contamination.
TH028 Development of an optimal analytical protocol for the extraction of persistent organic pollutants adsorbed on plastic debris in the environment K. Sakaguchi-Soeder, Technische Universitaet Darmstadt / Institute IWAR Chair of Material Flow Management and Resource Economy Germany; T. Neuveglise, Technische Universitaet Darmstadt / Department of Civil and Environmental Engineering; A. Goharnia, Technische Universitaet Darmstadt / Institue IWAR Chair of Material Flow Management and Resource Economy; M. Gottschling, Technische Universitaet Darmstadt / Institute IWAR Chair of Material Flow Management and Resource Economy Germany; A. van Oyen, Plastic Partner GmbH. Accumulation of persistent organic pollutants (POPs)-loaded microplastics (MPs) in the aquatic milieu is an emerging issue of international concern. Qualitative/quantitative determination of POPs on MPs is essential for the estimation of the impact of POPs-loaded MPs on a range of marine organisms. In general, hydrophobic pollutants like POPs are first extracted from the matrix, in this case plastic debris, using non-polar solvents. Then, the extract will be cleaned-up and analysed in e.g. gaschromatography/ mass-spectrometry (GC/MS). Some non-polar solvents applied for POP extraction, however, may dissolve plastic debris partially or completely, which disturb subsequence analyses. A number of methods have been reported for the extraction of POPs from MPs. Yet, the validity of these methods have not been fully discussed and the influence of polymers in extraction solvent on subsequent POP analysis has not been thoroughly investigated. The goal of the current study is the development of an optimal analytical protocol to extract POPs from different MPs. Known amounts of POPs were artificially charged on the surface of selected polymer particles, including preproduction resin pellets from different polymer type (polyethylene, PE; polystyrene, PS; polyethylene terephthalate PET, polypropylene, PP; poly vinyl chloride, PVC) in the laboratory. The POPs on plastic particles were extracted in selected solvents using soaking and sonication methods under different conditions. Solvents used in this study include n-hexane (nHex), isopropanol (iPrOH) and dichloromethane (DCM). Extraction methods and conditions were evaluated for a high extraction recovery, a high reproducibility, as well as for a minimal damage of polymer particles, i.e. carriers of POPs. The recovery rate and analytical reproducibility of POP was determined using gas chromatography-mass spectrometry (GC/MS). The loss of plastic weight was measured for the evaluation of the stability of plastic particles under given extraction conditions. Further, we investigated the influence of polymers dissolved in solvent on quantitative analysis for POPs. TU Darmstadt and CARAT are participants of an EU project “PLASTOX”, a consortium of a JPI Oceans’ Joint Action. TU Darmstadt is funded by BMBF.
More Papers Like This
Extraction of Organochlorine Pesticides from Plastic Pellets and Plastic Type Analysis
AI summary Read the abstract
Researchers measured organochlorine pesticide concentrations in plastic pellets collected from beaches and analyzed how plastic type affects sorption of these persistent contaminants. The study shows that plastic pellets accumulate significant levels of legacy pesticides from seawater, acting as chemical sponges that can deliver concentrated toxic loads to marine organisms.
Insights into emerging organic pollutants extraction from polypropylene, polystyrene, and polyethylene microplastics
AI summary Read the abstract
Researchers developed and validated an analytical method for extracting and measuring emerging organic pollutants absorbed onto microplastics, simultaneously accounting for particle size, weathering state, and environmental matrix effects for the first time. The method worked well across multiple polymer types and real environmental samples, providing a more reliable tool for assessing the chemical contamination hitchhiking on microplastics in the environment.
Desorption of Hydrophobic Organic Chemicals from Fragment-Type Microplastics
AI summary Read the abstract
Hydrophobic organic chemicals (HOCs) including persistent pollutants desorb from irregularly shaped polyethylene and polypropylene microplastic fragments in seawater at rates predictable from simple geometric approximations of particle size. This matters because microplastics act as mobile carriers of toxic chemicals, and understanding desorption kinetics helps assess how much contamination is released into marine food webs.
Determination of organochlorine pesticides adsorbed on plastic pellets
AI summary Read the abstract
Researchers analyzed organochlorine pesticides adsorbed onto plastic pellets found in coastal environments, contributing to understanding of how plastic debris accumulates and concentrates toxic chemicals. Plastic pellets, a type of microplastic, can act as carriers bringing persistent organic pollutants into marine food webs.
Influence of a suite of environmentally relevant conditions on PBT leaching from, and sorption to, marine microplastic debris
AI summary Read the abstract
Researchers examined how environmental conditions such as UV exposure, weathering, and saltwater affect the ability of marine microplastics to absorb or release persistent, bioaccumulative, and toxic (PBT) chemicals, finding that the type of plastic and its weathering history significantly influence how much chemical contamination it carries into the marine food web.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.