We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Chemical mapping of tire and road wear particles for single particle analysis
Summary
Tire and road wear particles (TRWP), which contain rubber polymer and pavement material, were chemically mapped using laser ablation-ICP-MS for single particle analysis. The technique enabled characterization of trace element distributions within individual TRWP particles, improving understanding of their environmental fate alongside conventional microplastics.
Tire and road wear particles (TRWP), which are comprised of polymer-containing tread with pavement encrustations, are generated from friction between the tire and the road. Similar to environmentally dispersed microplastic particles (MP), the fate of TRWP depends on both the mass concentration as well as individual particle characteristics, such as particle diameter and density. The identification of an individual TRWP in environmental samples has been limited by inherent characteristics of black particles, which interfere with the spectroscopic techniques most often used in MP research. The purpose of this research was to apply suitable analytical techniques, including scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDX) mapping and time-of-flight secondary ion mass spectrometry (ToF-SIMS) mapping, to characterize the specific physical and chemical properties of individual TRWP. Detailed elemental and organic surface maps were generated for numerous samples including bulk tread material, cryogenically milled tire tread particles, and TRWP generated from two separate road simulator methods. Key physical and chemical characteristics of TRWP for single particle identification included (1) elongated/round shape with variable amounts of mineral encrustation, (2) elemental surface characteristics including co-localization of (S + Zn/Na) ± (Si, K, Mg, Ca, and Al), and (3) co-localization of organic surface markers, such as C6H5+ and C7H7+. Comparisons of TRWP with other polymeric (polystyrene) and non-polymeric (carbon black) particle types demonstrated that a combination of physical and chemical markers is necessary to identify TRWP. Addition of a density separation step to the single particle analysis techniques allowed for the determination of average primary TRWP particle size (34 μm by number distribution and 49 μm by volume distribution) and aspect ratio (65% of TRWP with an aspect ratio > 1.5). The use of chemical mapping techniques, such as SEM/EDX and/or ToF-SIMS mapping as demonstrated herein, can support future research efforts that aim to identify complex MP.
Sign in to start a discussion.
More Papers Like This
Trace element distribution in marine microplastics using laser ablation-ICP-MS
Laser ablation-ICP-MS was applied to characterize trace element distributions within individual microplastic particles collected from marine environments. The technique revealed that microplastics carry and concentrate diverse trace metals on their surfaces, providing direct evidence of their capacity to transport metal contaminants in marine systems.
Investigation of physical and chemical properties of particulate matter caused by vehicle tire wear
Researchers characterized the physical and chemical properties of submicron tire wear particles generated from vehicle use on roadways. Using advanced analytical techniques, they identified the elemental composition and morphological structure of these particles, finding notable concentrations of metals and heavy metals. The study highlights that tire wear particles are a significant source of microplastic and chemical pollution with potential implications for human health and the environment.
Qualitative and Quantitative Analysis of Tire Wear Particles (TWPs) in Road Dust Using a Novel Mode of Operation of TGA-GC/MS
This study developed qualitative and quantitative methods for analyzing tire wear particles (TWPs) in road dust, using a combination of analytical techniques to distinguish rubber particles from other road dust components. Accurate TWP quantification is essential for assessing their contribution to environmental microplastic burdens.
Quantification of tire tread wear particles in microparticles produced on the road using oleamide as a novel marker
A novel analytical method using oleamide, a compound incorporated into tire rubber for processing purposes, as a chemical marker was developed and validated to quantify tire tread wear particles in road microparticle samples, offering improved specificity over existing benzothiazole-based approaches for source attribution of tire-derived microplastics.
Methods for laboratory-generation and physico-chemical characterisation of tyre wear particles
Researchers developed a lab method to generate tire wear particles using a friction machine and then identified a suite of chemical compounds that could serve as reliable markers for detecting these particles in environmental samples. Tire wear is one of the largest single sources of microplastic pollution globally, yet quantifying it in the environment has been hampered by the lack of agreed marker compounds. This work lays groundwork for standardized monitoring of tire particle pollution in soils and waterways.