We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Optimization of Process Parameters for Fabricating Polylactic Acid Filaments Using Design of Experiments Approach
Summary
Researchers developed an automatic PLA filament extruder and used a design-of-experiments approach to optimize process parameters for recycling waste polylactic acid (PLA) from 3D printing into new filaments, demonstrating a viable circular approach to reducing PLA waste.
The amount of wasted polylactic acid (PLA) is increasing because 3D printing services are an increasingly popular offering in many fields. The PLA is widely employed in the fused deposition modeling (FDM) since it is an environmentally friendly polymer. However, failed prototypes or physical models can generate substantial waste. In this study, the feasibility of recycling PLA waste plastic and re-extruded it into new PLA filaments was investigated. An automatic PLA filament extruder was first developed for fabricating new PLA filaments. This paper also discusses the process, challenges, and benefits of recycling PLA waste plastic in an effort to fabricate new PLA filaments more sustainable. It was found that it was possible to fabricate PLA filament using recycled PLA waste plastic. The production cost is only 60% of the commercially available PLA filament. The tensile strength of the developed PLA filament is approximately 1.1 times that of the commercially available PLA filament. The design of experiments approach was employed to investigate the optimal process parameters for fabricating PLA filaments. The most important control factor affecting the diameter of PLA filament is the barrel temperature, followed by recycled material addition ratio, extrusion speed, and cooling distance. The optimal process parameters for fabricating PLA filament with a diameter of 1.7 mm include the barrel temperature of 184 °C, extrusion speed of 490 mm/min, cooling distance of 57.5 mm, and recycled material addition ratio of 40%.
Sign in to start a discussion.
More Papers Like This
3D-Printed recycled polyethylene terephthalate (PET) sandwich structures – Influence of infill design and density on tensile, dynamic mechanical, and creep response
Researchers 3D-printed structural components using filament made from recycled plastic bottles (PET) and tested different internal geometric patterns to find the strongest design, demonstrating that circular economy approaches — turning plastic waste into useful manufactured parts — can produce materials with good mechanical properties while reducing plastic pollution.
Extrusion and Characterization of Recycled Polyethylene Terephthalate (rPET) Filaments Compounded with Chain Extender and Impact Modifiers for Material-Extrusion Additive Manufacturing
Researchers developed recycled PET plastic filaments with improved mechanical properties for use in 3D printing, by adding chain extenders and impact modifiers during processing. Converting plastic waste into 3D printing feedstock offers a pathway to upcycle PET bottles that would otherwise fragment into microplastics in the environment.
Processing System for Plastic Bottle to Obtain Polyethylene Terephthalate Filament in 3D Printers
Researchers developed a processing system to convert waste PET plastic bottles into filament suitable for 3D printers, addressing low plastic recycling rates in Peru and offering a practical approach to reducing PET contamination in terrestrial, marine, and climatic ecosystems.
Extrusion and characterization of recycled polyethylene terephthalate (rPET) filaments compounded with chain extender and impact modifiers for material-extrusion additive manufacturing
Researchers extruded recycled polyethylene terephthalate (rPET) filaments with chain extenders and impact modifiers for use in material-extrusion 3D printing, finding improved mechanical properties compared to unmodified rPET. Upcycling waste PET into 3D printing feedstock offers a circular economy approach to reducing plastic waste that leaks into the environment.
Material Characterizations of the Polymers Reinforced with Recycled Flexible Plastic Blends as Filament for 3D Printing
Researchers characterized polymer blends made from recycled flexible plastics mixed with high-density polyethylene and polypropylene for use as 3D printing filaments. The study found that incorporating recycled plastic into filament materials is technically feasible, offering a potential pathway to reduce plastic waste by converting single-use plastics into useful manufacturing materials.