We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics in Wastewater and Drinking Water Treatment Plants: Occurrence and Removal of Microfibres
AI summary Read the abstract
Researchers reviewed the occurrence and removal of microfibres in wastewater and drinking water treatment plants worldwide. They found that while treatment processes achieve over 70% removal efficiency on average, significant numbers of microfibres still pass through to treated wastewater and tap water. The study estimates that an adult may ingest an average of 7,500 microplastic fibres per year through tap water alone, highlighting the need for improved treatment technologies.
Microplastics (MPs), and specifically microfibres (MPFs), are ubiquitous in water bodies, including wastewater and drinking water. In this work, a thorough literature review on the occurrence and removal of MPs, and specifically MPFs in WWTPs and DWTPs, has been carried out. When the water is treated, an average microfiber removal efficiency over 70% is achieved in WWTPs and DWTPs. These high percentages are still inefficient for avoiding the presence of a large number of microfibres in treated wastewater and also in tap water. RSF, DAF, oxidation ditch and CAS processes have been described as the most efficient treatments for eliminating MPFs from wastewater treatment. It is remarkable the wide range of the data reported on this topic; for example, treated wastewater contains between not detected and 347 MPFs/L, whereas tap water contains between not detected and 168 MPFs/L. Microfibres constitute more than half of the MPs found in treated wastewater and sewage sludge, whereas in DWTP effluents the percentage of MPFs is around 32%. Nevertheless, the relative amount of MPFs reported in tap water is notably higher (71%). Microfibres from WWTPs are discharged to the environment, being a source of MP pollution. Additionally, MPs released by DWTPs directly enter the drinking water lines, which constitute a direct route for MP human consumption, so that it has been estimated that an adult may ingest an average value of 7500 MPFs per year only via tap water. Thus, this review provides an update on the performance of WWTPs and DWTPs in removing MPs from water, which is an issue of great interest.
More Papers Like This
Removal of microplastics via drinking water treatment: Current knowledge and future directions
AI summary Read the abstract
This review examines what is currently known about microplastics in drinking water systems and how well existing water treatment processes remove them. Researchers found that while conventional treatment steps like coagulation and filtration do reduce microplastic levels, significant amounts can still persist through to tap water. The study calls for more research into optimizing treatment processes and developing monitoring strategies specifically targeting microplastic contamination in drinking water.
Removal of microplastics and nanoplastics in water treatment processes: A systematic literature review
AI summary Read the abstract
Researchers systematically reviewed 103 studies across 26 water treatment plants in 12 countries to assess how well various technologies remove microplastics and nanoplastics from drinking water, finding that while coagulation, filtration, and advanced treatments help, significant gaps remain. The review identifies that no single process achieves complete removal, leaving microplastics as a persistent contaminant in treated water supplies.
Detection and Occurrence of Microplastics through Municipal and Pilot-scale Drinking Water Treatment Plants
AI summary Read the abstract
Researchers developed a new method for detecting and characterizing microplastics in drinking water samples from municipal and private treatment systems. They found microplastics in treated drinking water, though at lower concentrations than in source water, and identified fibers as the most common type. The study demonstrates that conventional water treatment does not completely remove microplastics from drinking water.
Occurrence of microplastics in raw and treated drinking water
AI summary Read the abstract
Researchers analyzed raw and treated water from three water treatment plants and found microplastics in all samples, though treatment reduced particle counts by roughly 70 to 80 percent. The vast majority of detected particles were smaller than 10 micrometers, a size range often missed by other studies. The findings highlight that while water treatment removes most microplastics, very small particles can still pass through conventional filtration systems.
Analysis of the Efficiency of Drinking Water Treatment Systems in the Removal of Microplastics
AI summary Read the abstract
Researchers analysed the efficiency of drinking water treatment systems in removing microplastics — primarily PET, PP, PS, and PVC fibres and fragments — from source water, reviewing how physical, chemical, and biological treatment stages contribute to reduction. The review also evaluates associated health risks including inflammation, oxidative stress, endocrine disruption, and genetic damage linked to microplastic exposure via drinking water.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.