We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Kinetic Analysis for the Catalytic Pyrolysis of Polypropylene over Low Cost Mineral Catalysts
Summary
This study analyzed the thermal decomposition kinetics of polypropylene plastic with different low-cost natural catalysts, finding that certain clay and zeolite-based catalysts significantly lowered the temperature needed to break down the polymer. Catalytic pyrolysis could be a practical approach for converting waste plastic into useful fuel oils, helping reduce the plastic waste that generates microplastic contamination.
A kinetic analysis of non-catalytic pyrolysis (NCP) and catalytic pyrolysis (CP) of polypropylene (PP) with different catalysts was performed using thermogravimetric analysis (TGA) and kinetic models. Three kinds of low-cost natural catalysts were used to maximize the cost-effectiveness of the process: natural zeolite (NZ), bentonite, olivine, and a mesoporous catalyst, Al-MCM-41. The decomposition temperature of PP and apparent activation energy (Ea) were obtained from the TGA results at multiple heating rates, and a model-free kinetic analysis was performed using the Flynn–Wall–Ozawa model. TGA indicated that the maximum decomposition temperature (Tmax) of the PP was shifted from 464 °C to 347 °C with Al-MCM-41 and 348 °C with bentonite, largely due to their strong acidity and large pore size. Although olivine had a large pore size, the Tmax of PP was only shifted to 456 °C, because of its low acidity. The differential TG (DTG) curve of PP over NZ revealed a two-step mechanism. The Tmax of the first peak on the DTG curve of PP with NZ was 376 °C due to the high acidity of NZ. On the other hand, that of the second peak was higher (474 °C) than the non-catalytic reaction. The Ea values at each conversion were also decreased when using the catalysts, except olivine. At <0.5 conversion, the Ea obtained from the CP of PP with NZ was lower than that with the other catalysts: Al-MCM-41, bentonite, and olivine, in that order. The Ea for the CP of PP with NZ increased more rapidly, to 193 kJ/mol at 0.9 conversion, than the other catalysts.
Sign in to start a discussion.
More Papers Like This
Catalytic pyrolysis of waste polypropylene using low-cost natural catalysts
Researchers tested three low-cost natural minerals — kaolin, hematite, and white sand — as catalysts for converting waste polypropylene plastic into fuel oil through a heating process called pyrolysis. Kaolin performed best, boosting oil yield to over 80% and producing higher-quality lighter oils at a cost of just $0.28 per kilogram, offering a cheap way to turn plastic waste into usable fuel.
Recent Progress in Low-Cost Catalysts for Pyrolysis of Plastic Waste to Fuels
This review evaluated low-cost catalysts — including zeolites, clays, and bimetallic materials — for the pyrolytic conversion of plastic waste into fuel, comparing their effects on product yield and quality and highlighting promising candidates for scaling up plastic-to-fuel processes.
Catalytic pyrolysis of mixed plastic wastes using commercial grade kaolin and Ukpor clay from Nigeria
Researchers used local clay materials from Nigeria as low-cost catalysts to convert mixed plastic waste into liquid fuel through pyrolysis. The study demonstrates that waste plastic can be transformed into usable fuel using affordable, locally available materials — a practical recycling approach for developing regions.
Conversion of Polyethylene to Low-Molecular-Weight Oil Products at Moderate Temperatures Using Nickel/Zeolite Nanocatalysts
Incorporating small nickel nanoparticles into zeolite catalysts allowed polyethylene — the world's most widely used plastic — to be broken down into useful low-molecular-weight oils at 350 °C, compared to the 400 °C required without a catalyst. This lower-temperature catalytic process offers a more energy-efficient route to upcycling plastic waste and reducing microplastic pollution from discarded packaging.
Thermal and catalytic pyrolysis of a real mixture of post-consumer plastic waste: An analysis of the gasoline-range product
Researchers performed thermal and catalytic pyrolysis on real post-consumer plastic waste mixtures using various catalysts, finding that polymer type strongly influenced gas, liquid, and char yields, and that zeolite catalysts produced gasoline-range hydrocarbon liquids with commercially viable compositions from mixed plastic feedstocks.