We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Catalytic pyrolysis of mixed plastic wastes using commercial grade kaolin and Ukpor clay from Nigeria
Summary
Researchers used local clay materials from Nigeria as low-cost catalysts to convert mixed plastic waste into liquid fuel through pyrolysis. The study demonstrates that waste plastic can be transformed into usable fuel using affordable, locally available materials — a practical recycling approach for developing regions.
The aim of this study is to convert mixed plastic waste into usable liquid fuel via pyrolysis technique using Ukpor clay as a low-cost catalyst and commercial grade kaolin. Waste plastic was catalytically degraded in a laboratory scale pyrolysis semi-batch reactor at a temperature of 400 °C, residence time of 45 min, and heating rate of 16 ˚C/min. The catalysts were characterized by XRF analysis while proximate analysis of the plastic feed carried out gave volatile materials content of 95.17 wt%, fixed carbon of 1.51 wt% and ash content of 2.6 wt%. Ukpor clay and kaolin were employed as catalysts in catalytic pyrolysis of the same feedstock for catalyst-to-plastic ratio of 1:1, 1:2, 1:3, and 1:4 and at the same operating parameters. Optimum yields were obtained at a catalyst-to-plastic ratio of 1:3 for both catalysts with a yield of 85.80, 3.58, and 10.62 wt% for Ukpor clay and 89.80, 6.33, and 3.87 wt% for kaolin for the liquid, gaseous, and solid products, respectively. The liquid products obtained for the catalytic cracking at optimum conditions were characterized for their suitability as fuel. The properties determined were density, viscosity, flash point, pour point, and calorific value. The results suggest that both catalysts produced liquid products, whose properties are comparable to conventional fuels (gasoline and diesel oil) with kaolin catalytic pyrolysis process producing higher liquid yield. GC-MS analysis found that most of the liquid oil produced a high aromatic content with some aliphatic and other hydrocarbon compounds, FTIR analysis of the liquid product from catalytic pyrolysis also shows that it contains hydrocarbons with different functional groups such as aromatics, olefins, carbonyl, amines, sulphides, and hydroxyl.
Sign in to start a discussion.
More Papers Like This
Liquid fuel production from catalytic pyrolysis of municipal plastic waste using synthesized Zeolite from Kaolin
This paper is not relevant to microplastics research — it evaluates a catalytic pyrolysis process using zeolite from kaolin to convert municipal plastic waste into liquid fuel as an alternative energy source.
Recent Progress in Low-Cost Catalysts for Pyrolysis of Plastic Waste to Fuels
This review evaluated low-cost catalysts — including zeolites, clays, and bimetallic materials — for the pyrolytic conversion of plastic waste into fuel, comparing their effects on product yield and quality and highlighting promising candidates for scaling up plastic-to-fuel processes.
Thermal and catalytic pyrolysis of a real mixture of post-consumer plastic waste: An analysis of the gasoline-range product
Researchers performed thermal and catalytic pyrolysis on real post-consumer plastic waste mixtures using various catalysts, finding that polymer type strongly influenced gas, liquid, and char yields, and that zeolite catalysts produced gasoline-range hydrocarbon liquids with commercially viable compositions from mixed plastic feedstocks.
Towards fuels production by a catalytic pyrolysis of a real mixture of post-consumer plastic waste
Researchers tested in-situ catalytic pyrolysis of a real mixed post-consumer plastic waste stream from mechanical-biological treatment facilities, producing a liquid fuel fraction with properties comparable to gasoline, kerosene, and diesel.
Catalytic pyrolysis of waste polypropylene using low-cost natural catalysts
Researchers tested three low-cost natural minerals — kaolin, hematite, and white sand — as catalysts for converting waste polypropylene plastic into fuel oil through a heating process called pyrolysis. Kaolin performed best, boosting oil yield to over 80% and producing higher-quality lighter oils at a cost of just $0.28 per kilogram, offering a cheap way to turn plastic waste into usable fuel.