Abundance and characteristics of microplastics in an urban wastewater treatment plant in Turkey

Wastewater treatment plants (WWTPs) are considered one of the important sources of aquatic/terrestrial microplastic (MP) pollution. Therefore, the abundance and properties of MPs in the wastewater and sludge of an urban WWTP in Bursa Turkey were investigated. The amount, properties, and removal of MPs were evaluated. The results showed that the average abundance of MPs was 135.3 ± 28.0 n/L in the influent and 8.5 ± 4.7 n/L in the effluent, with a 93.7% removal rate, MP was removed and transferred to the sludge. The daily MP amount released in the aquatic environment is calculated as 525 million MPs, and the annual amount is 1.9 × 10 MPs. The abundance of MPs in the sludge thickening and sludge filter cake is 17.9 ± 2.3 and 9.5 ± 2.3 n/g dry weight (dw), respectively. The sludge disposal amount of WWTP is 81.5 tons/day and the approximate amount of MP accumulated in the sludge per year is calculated as 2.8 × 10 MPs. In wastewater and sludge samples, fragment dominant shape, black main colour, and 500-1000 μm sizes are the most common size. The main MP types in wastewater samples at the influent are polypropylene (PP, 36.8%), polyethylene (PE, 31.0%), polystyrene (PS, 11.8%), polyethylene terephthalate (PET, 8.0%), and polyamide (PA, 7.1%), at the effluent (PE, 33.0%), (PP, 52.5%), and (PS, 8.2%). In the sludge cake, the distribution is (PE, 40.8%), (PP, 27.6%), (PS, 18.7%) and (PET, 8.0%). The results of this study show that MPs are removed from wastewater with high efficiency by treatment processes and a significant amount accumulates in the sludge. Therefore, it is suggested that to integrate advanced treatment processes into urban WWTPs and use effective sludge disposal management practices to reduce the amount of MP released into the environment with effluent and sludge.