We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Effects of clay minerals on the transport of polystyrene nanoplastic in groundwater
Summary
Researchers investigated how clay minerals affect nanoplastic transport in groundwater, finding that montmorillonite, kaolinite, and illite each uniquely influenced polystyrene nanoparticle mobility, with montmorillonite showing the strongest retention capacity due to its high surface charge.
Microplastics are widely detected in the soil-groundwater environment, which has attracted more and more attention. Clay mineral is an important component of the porous media contained in aquifers. The transport experiments of polystyrene nanoparticles (PSNPs) in quartz sand (QS) mixed with three kinds of clay minerals are conducted to investigate the effects of kaolinite (KL), montmorillonite (MT) and illite (IL) on the mobility of PSNPs in groundwater. Two-dimensional (2D) distributions of DLVO interaction energy are calculated to quantify the interactions between PSNPs and three kinds of clay minerals. The critical ionic strengths (CIS) of PSNPs-KL, PSNPs-MT and PSNPs-IL are 17.0 mM, 19.3 mM and 21.0 mM, respectively. Experimental results suggest KL has the strongest inhibition effect on the mobility of PSNPs, followed by MT and IL. Simultaneously, the change of ionic strength can alter the surface charge of PSNPs and clay minerals, thus affecting the interaction energy. Experimental and model results indicate both the deposition rate coefficient (k) and maximum deposition (S) linearly decrease with the logarithm of the DLVO energy barrier, while the mass recovery rate of PSNPs (R) exponentially increases with the logarithm of the DLVO energy barrier. Therefore, the mobility and associated kinetic parameters of PSNPs in complex porous media containing clay minerals can be predicted by 2D distributions of DLVO interaction energy. These findings could help to gain insight into understanding the environmental behavior and transport mechanism of microplastics in the multicomponent porous media, and provide a scientific basis for the accurate simulation and prediction of microplastic contamination in the groundwater system.
Sign in to start a discussion.
More Papers Like This
Effects of clay minerals on the transport of nanoplastics through water-saturated porous media
Column experiments with clay-containing saturated porous media showed that clay minerals reduced nanoplastic transport by enhancing particle retention through bridging flocculation and charge neutralization, with kaolinite having greater retention effects than montmorillonite, informing predictions of nanoplastic mobility in clay-rich soils.
Influence of Concentration, Surface Charge, and Natural Water Components on the Transport and Adsorption of Polystyrene Nanoplastics in Sand Columns
Laboratory column experiments showed that nanoplastics made of polystyrene behave very differently in groundwater depending on their surface charge — positively charged particles were retained much more readily in sand than negatively charged ones, and the presence of natural organic matter in real lake water reduced the retention of both types. These findings matter for understanding whether nanoplastics released into the environment will travel through soil and reach drinking water sources, which depends critically on the plastic's surface chemistry.
Mechanisms of increased small nanoplastic particle retention in water-saturated sand media with montmorillonite and diatomite: Particle sizes, water components, and modelling
Researchers compared how clay minerals (diatomite and montmorillonite) affect the transport of 20 nm and 80 nm polystyrene nanoplastics through water-saturated sand columns, finding that very small nanoplastics (20 nm) can enter diatomite's porous lattice structure, enhancing their retention, while montmorillonite more broadly inhibited transport of both sizes.
Transport of polystyrene nanoplastics in natural soils: Effect of soil properties, ionic strength and cation type
Researchers used column experiments across three soil types to show that polystyrene nanoplastic transport is governed by soil iron and aluminum oxide content and pH — with high-pH, low-oxide soils allowing up to 97% nanoplastic passage — and that calcium ions and higher ionic strength significantly increase retention, revealing that soil chemistry strongly controls nanoplastic mobility toward groundwater.
Vertical transport of polystyrene nanoplastics in natural soils under unsaturated conditions: influence of particle size and texture
Laboratory experiments showed that polystyrene nanoplastics can travel downward through unsaturated soils, but larger particles and clay-rich soils retain them more effectively than smaller particles in sandy soils. Understanding how nanoplastics move through soil is important for predicting whether they will reach groundwater and contaminate drinking water sources.