We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Microplastics in sewage sludge destined to anaerobic digestion: The potential role of thermal pretreatment
AI summary Read the abstract
Researchers found that thermal pretreatment of sewage sludge at 120°C did not degrade conventional PET microplastics but did alter biodegradable microplastics, which also boosted methane production during anaerobic digestion, raising concerns about how different microplastic types behave in sludge treatment.
Microplastics (MPs) are plastic particles with size smaller than 5 mm: their removal in municipal wastewater treatment plants mostly results in the accumulation of the coarser fraction into the sludge. The common application of the treated sludge as soil amendment raises the issue of the uncontrolled release of MPs into the environment, which depicts the need to identify suitable counteraction strategies. This work briefly reviews the most recent studies that focus on the fate of MPs during conventional sludge treatments, and, based on the results of this analysis, proposes the thermal pretreatment (120 °C, 30 min) of waste activated sludge (WAS) containing different kinds of MPs, in order to investigate its effect on the anaerobic biodegradability as well as on the abundance and physical features of MPs. Experimental results show that high temperatures did not alter polyethylene terephthalate (PET) MPs but the biodegradable-compostable ones (BIO-MPs), complying with the UNI EN 13432 standards. The profile of methane generation from thermally pretreated samples containing PET-MPs do not indicate any inhibition of the anaerobic process, which was positively influenced by the BIO-MPs in WAS: a 100% and 25% methane increase was observed over the control samples with and without the thermal pretreatment, respectively. Further studies are needed to better understand the mechanisms underlying biodegradable MPs behavior as well as to investigate the influence of high temperature treatments on smaller size MPs during anaerobic processes.
More Papers Like This
MicroplasticDegradation through Thermal Hydrolysisin Sewage Sludge and Its Impact on the Anaerobic Process
AI summary Read the abstract
Researchers investigated the fate of microplastics in sewage sludge during thermal hydrolysis pretreatment and found that temperatures of 140-180°C significantly degraded microplastics while also affecting subsequent anaerobic biogas production from the treated sludge.
Thermal hydrolysis alleviates polyethylene microplastic-induced stress in anaerobic digestion of waste activated sludge
AI summary Read the abstract
Scientists found that pretreating waste sludge with heat before anaerobic digestion reduced the negative effects that polyethylene microplastics have on the process. The thermal treatment improved methane production and helped maintain healthy microbial communities even in the presence of microplastics. The study suggests that thermal hydrolysis could be a practical strategy for wastewater treatment plants dealing with microplastic-contaminated sludge.
Impact of alkaline thermal hydrolysis on anaerobic digestion of mixed sludge contaminated with microplastics
AI summary Read the abstract
Researchers tested alkaline thermal hydrolysis pretreatment on sludge containing polyethylene and PVC microplastics before anaerobic digestion, finding that the pretreatment altered how microplastics affected subsequent methane production, with effects varying by polymer type and concentration.
Microplastic Degradation through Thermal Hydrolysis in Sewage Sludge and Its Impact on the Anaerobic Process
AI summary Read the abstract
Researchers found that thermal hydrolysis pretreatment of sewage sludge reduced microplastic concentrations from 206 particles/g to lower levels, with approximately 54% of microplastics initially in solid phase, and examined the implications for sludge management and microplastic fate.
How does alkaline-thermal pretreatment followed by anaerobic digestion affect the content of polyethylene terephthalate and polyamide 66 microplastics?
AI summary Read the abstract
Researchers investigated how alkaline-thermal pretreatment of sludge followed by anaerobic digestion affects PET and polyamide-66 microplastics in wastewater treatment. Different NaOH concentrations, temperatures, and retention times altered the physical and chemical characteristics of both MP types, informing strategies for reducing MP persistence in sludge destined for agricultural reuse.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.