We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Urban stormwater microplastic size distribution and impact of subsampling on polymer diversity
AI summary Read the abstract
Researchers examined how subsampling affects the characterization of microplastics in urban stormwater, finding that small subsamples can underestimate polymer diversity and that fibrous microplastics dominated across urban and suburban sites.
Understanding not only microplastic (MP) concentration but also size distribution, morphology, and polymer profiles is desirable for stormwater, which is an important pathway of entry for MP into the aquatic environment. A challenge is that subsampling is often required for analysis of environmental samples and the impact of subsampling on the stormwater MP concentration determined and the polymer types identified is poorly characterized. To address this, MP were extracted from urban and suburban stormwater, including from green infrastructure. Fourier Transform Infrared microscopy was performed to characterize MP. In addition, particle dimensions and morphology were recorded. Varying the number of 63-250 μm particles subsampled per sample demonstrated the coefficient of variation for concentration (standard deviation/mean) for most samples was <0.3 when 20 particles (0.8-15% of total particles) or <0.2 when 30 particles (1.2-24% of total particles) per sample were analyzed. MP concentrations in the 63-250 μm size class ranged from 15 to 303 MP/L, one to two orders of magnitude greater than observed in previously reported paired samples from the 250-500 or 500-2000 μm size classes. A total of 25 plastic polymer types were observed across samples, more than observed in the large size classes. Spectral signatures of surface oxidation indicative of weathering were observed on most polyethylene, polypropylene, and polystyrene particles, which were the most abundant polymer types. Fragments were the dominant morphology with an average maximum length of 158 ± 92 μm. Overall, these results may help inform subsampling methods and be useful in future exposure assessments for aquatic organisms or design of MP removal technologies for urban and suburban stormwater.
More Papers Like This
Stormwater microplastic polymer types, particle sizes, and impact of techniques
AI summary Read the abstract
Researchers characterised microplastic size distribution, morphology, and polymer profiles in urban stormwater runoff across multiple storm events and assessed how different subsampling techniques affect estimated microplastic concentrations and polymer diversity. The study found that subsampling methodology significantly influences results, highlighting the need for standardised approaches to accurately quantify stormwater as a microplastic pathway into aquatic ecosystems.
Characterizing microplastics in urban runoff: A multi-land use assessment with a focus on 1–125 μm size particles
AI summary Read the abstract
Researchers collected stormwater runoff from three different urban land use types and found microplastics present across all sites, with significant variation in polymer types depending on the area. By using multiple detection techniques, they were able to identify particles as small as 1 micrometer, revealing that the smallest size fractions dominated the total count. The study emphasizes that urban runoff is a major pathway for microplastic pollution reaching waterways.
Stormwater microplastic polymer types, particle sizes, and impact of techniques
AI summary Read the abstract
Researchers characterized microplastic size distribution, morphology, polymer composition, and loading in urban stormwater runoff across two sampling campaigns using different standardized methods (NOAA and ASTM protocols) with FTIR and FTIR-microscopy analysis. They found MP concentrations of 86 particles/L in the 63-250 µm size range and assessed how subsampling strategies affect estimated concentrations and polymer diversity in environmental samples.
Stormwater runoff microplastics: Polymer types, particle size, and factors controlling loading rates
AI summary Read the abstract
Researchers characterized microplastics in stormwater runoff samples collected at urban outfall locations. The study identified 17 different polymer types across various storm events, with concentrations around 0.99 particles per liter for the 500-1000 micrometer size range, and found that rainfall intensity and land use were key factors controlling microplastic loading rates.
Representative subsampling methods for the chemical identification of microplastic particles in environmental samples
AI summary Read the abstract
Researchers evaluated different subsampling approaches for selecting microplastic particles from environmental samples for chemical identification, testing representativeness across particle count, size, and polymer type. The study identified best-practice protocols for achieving reliable estimates of plastic fraction and polymer composition from large heterogeneous samples.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.