We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Laser microdissection pressure catapulting (LMPC): a new technique to handle single microplastic particles for number-based validation strategies
AI summary Read the abstract
Researchers examined laser microdissection pressure catapulting (LMPC) as a contactless technique for handling individual microplastic particles ranging from a few micrometers to several hundred micrometers, enabling their precise transport into collection vials for number-based method validation. Proof-of-principle experiments with polyethylene and polyethylene terephthalate demonstrated the technology can reliably produce particle number-based spike suspensions needed for rigorous microplastic analytical method validation.
This study examines laser microdissection pressure catapulting (LMPC) as an innovative method for microplastic research. Laser pressure catapulting as part of commercially available LMPC microscopes enables the precise handling of microplastic particles without any mechanical contact. In fact, individual particles with sizes between several micrometers and several hundred micrometers can be transported over centimeter-wide distances into a collection vial. Therefore, the technology enables the exact handling of defined numbers of small microplastics (or even individual ones) with the greatest precision. Herewith, it allows the production of particle number-based spike suspensions for method validation. Proof-of-principle LMPC experiments with polyethylene and polyethylene terephthalate model particles in the size range from 20 to 63 µm and polystyrene microspheres (10 µm diameter) demonstrated precise particle handling without fragmentation. Furthermore, the ablated particles showed no evidence of chemical alteration as seen in the particles' IR spectra acquired via laser direct infrared analysis. We propose LMPC as a promising new tool to produce future microplastic reference materials such as particle-number spiked suspensions, since LMPC circumvents the uncertainties resulting from the potentially heterogeneous behavior or inappropriate sampling from microplastic suspensions. Furthermore, LMPC could be advantageous for the generation of very accurate calibration series of spherical particles for microplastic analysis via pyrolysis-gas chromatography-mass spectrometry (down to 0.54 ng), as it omits the dissolution of bulk polymers.
More Papers Like This
Single-Particle Microplastics Analysis via Laser-Assisted MicroPyrolysis Flowing Atmospheric-Pressure Afterglow Mass Spectrometry Imaging
AI summary Read the abstract
Researchers developed a new lab method using a laser to vaporize tiny plastic particles collected on filters, then identified the plastic type using mass spectrometry. The technique detected polyethylene terephthalate and identified chemical additives in single microplastic particles, with a detection limit of 0.083 nanograms, equal to a plastic sphere about 5.4 micrometers wide.
Novel calibration approach for particle size analysis of microplastics by laser ablation single particle-ICP-MS
AI summary Read the abstract
Researchers developed a new calibration method for sizing microplastic particles using laser ablation coupled with mass spectrometry, eliminating the need for costly certified reference materials. Using a polystyrene thin film as the calibration standard, they achieved accurate sizing of particles as small as 2 micrometers across multiple polymer types. The approach demonstrated broad applicability and high transport efficiency, suggesting it could become a universal tool for microplastic particle analysis.
Laser ablation-based techniques for microplastic analysis
AI summary Read the abstract
This review examined laser ablation-based analytical techniques for detecting, characterizing, and quantifying microplastics in environmental and biological samples. The methods offer high spatial resolution and material specificity, making them valuable tools for advancing microplastic research.
From sieve to microscope: An efficient technique for sample transfer in the process of microplastics’ quantification
AI summary Read the abstract
Researchers developed a four-step sample transfer technique using a sieve-to-microscope approach to improve the reproducibility of microplastic quantification, addressing particle loss and inconsistent fractionation that are common sources of error in microplastic sample processing workflows.
A novel print-and-release method to prepare microplastics using an office-grade laserjet printer; a low-cost solution for preliminary studies
AI summary Read the abstract
Researchers developed an inexpensive method to produce standardized microplastic particles in the lab using an office laser printer, enabling low-cost preliminary research. Accessible laboratory tools for generating test microplastics are needed to expand research on microplastic toxicity and environmental behavior.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.