We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
The Effect of Tire Age and Anti-Lock Braking System on the Coefficient of Friction and Braking Distance
Summary
This paper is not relevant to microplastics; it is a technical automotive study examining how ABS braking systems and tire age affect friction coefficients and stopping distances on different road surfaces.
A technical study of the effects of the use of ABS and the type of road surface on a vehicle’s coefficient of friction when braking at maximum force is presented in this article. It was found that, with ABS, the coefficient of friction was on average 13% higher on dry surfaces and 30% higher on wet surfaces, resulting in a 14.3% reduction in stopping distance on dry surfaces and a 37% reduction on wet surfaces. Measurements were taken with the Vericom VC4000DAQ performance computer, which is a simple method used to measure braking performance on different surfaces with different tires. It was also observed that the friction coefficient decreases with tire age, with a moderate to high correlation between the two variables (age and friction coefficient). However, the model used in the study only explains a moderate amount of variability in the data. An estimate is presented in the article regarding tire wear, indicating that tires used for from five to eight years and driven at 12,000 km per year would wear 0.79–1.33 mm in one year, assuming that the original tread depth of the new tire is about 8–9 mm and the legal minimum tread depth in most European countries for all summer tires is 1.6 mm. The research recommends changing summer tires after six years of use if the driver travels an average of 12,000 km per year, as the tires’ weight decreases by 1.3 kg on average, the tread height decreases by 6 mm on average, and the friction coefficient decreases with age, leading to longer braking distances.
Sign in to start a discussion.
More Papers Like This
Occurrence of tire-derived microplastics (TMPs) focusing on driving behavior
Researchers analyzed tire-derived microplastics (tiny rubber particles shed from vehicle tires) on roadways and found their abundance increased with traffic volume and was further boosted by hard braking — with aggressive braking increasing particle counts by about 28%. These tire particles are a major source of microplastic contamination entering waterways from roads.
Characteristics of Vehicle Tire and Road Wear Particles’ Size Distribution and Influencing Factors Examined via Laboratory Test
Researchers conducted laboratory tests to characterize the size distribution of tire and road wear particles under various conditions. The study found that factors such as driving speed, tire composition, and road surface characteristics significantly influence the size and quantity of wear particles released, which are a growing source of microplastic pollution.
Impact of vehicle type, tyre feature and driving behaviour on tyre wear under real-world driving conditions
Researchers measured real-world tire wear from 76 taxi cars over 22 months, finding that hybrid vehicles produced more tire wear than conventional cars, likely due to their heavier battery weight. Winter tires generated about three times more wear than summer tires, and front tires wore 1.7 times faster than rear tires. The study provides practical data on tire-derived microplastic emissions under actual driving conditions, which is important for understanding this significant but understudied source of environmental microplastics.
Measures to reduce the spread of microplastic particles from tyre wear : On vehicles, on the road and in the roadside environment
Researchers reviewed measures to reduce the spread of microplastic particles from tyre wear at the vehicle, road, and roadside environment levels, examining the transport pathways via air, water, and snow and the risks these persistent, potentially toxic particles pose to ecosystems and human health.
A comparative analysis of the chemical composition and biofilm formation on tire wear particles from six different tire types
Researchers analyzed the chemical composition and biofilm communities forming on tire-wear particles compared to other microplastic types, finding that tire wear particles support distinct microbial assemblages. The unique surface chemistry of tire wear particles may promote the attachment of pathogens and toxin-producing microorganisms.