We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Modifications to sorption and sinking capability of microplastics after chlorination
Summary
Researchers found that chlorination disinfection at both low and high doses modified the surface chemistry of PE, PET, PS, and PVC microplastics, increasing surface area and reducing hydrophobicity while weakening their capacity to sorb contaminants like ciprofloxacin. The study concluded that chlorination generally reduces the role of microplastics as transport vectors for organic pollutants, though effects on buoyancy varied by polymer type.
Abstract Chlorination disinfection in water treatments may be highly destructive to microplastics (MPs). Herein, low- and high-dose (concentration–time values at 75 and 9,600 mg min L−1, respectively) chlorination processes were used to simulate short-term chlorination in drinking water treatment plants and long-term residual chlorine reaction in drinking water supply systems, respectively. Both chlorination processes induced modifications to polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS), and polyvinyl chloride (PVC) MPs, varying in polymer types and sizes. Oxidized and chlorinated bonds were detected, and destructed surfaces with increased specific surface area and reduced hydrophobicity were observed. As a result, the sorption capacity of all MPs was weakened, e.g., low-dose chlorination (pH 7) depressed the sorption of ciprofloxacin by 6.5 μm PE (Kf from 0.140 to 0.128 L g−1). The sinking behavior of PET, PS, and PVC MPs was enhanced, e.g., the sinking ratio of 200 μm PET increased by ∼30% after low-dose chlorination (pH 7). By contrast, PE tended to float after high-dose chlorination. Furthermore, chlorination of MPs generated various products, which were the degraded fragments from the MP skeleton. In general, chlorination disinfection reduces the potential of MPs as transport vectors of organic contaminants.