We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
Simultaneous degradation of microplastics and sludge during wet air oxidation
Summary
This study showed that wet air oxidation (WAO) — a high-temperature, high-pressure sludge treatment — can simultaneously break down polyethylene, polystyrene, and PET microplastics along with the sewage sludge they contaminate. All three plastic types were degraded without leaving detectable solid plastic residues, with acetic acid as the primary breakdown product. This is significant because conventional wastewater treatment cannot destroy microplastics, so WAO represents a promising upgrade for eliminating a major environmental release pathway.
Microplastics (MPs) generated from daily life are commonly collected by urban sewage pipe networks and then transfer to sludge in wastewater treatment plants. Conventional biochemical treatment processes cannot degrade MPs effectively, causing an ecological risk via sludge land use. Wet air oxidation (WAO) is a promising sludge treatment technology with a strong ability to decompose complex organic matter, but its potential for the removal of MPs in sludge was unclear. In this study, three common MPs (polyethylene, polystyrene, and polyethylene terephthalate, which are called PEMPs, PSMPs, and PETMPs) were added into the sludge samples (1 g MP in 180 mL sludge), to test the effects of WAO on sludge and MPs. The results showed that WAO simultaneously degraded sludge and the PEMPs, and the two degradation processes were relatively independent when oxygen was supplied adequately. The dissolution of PSMPs and organic matter in sludge was not affected by each other, but the degradation rate was slowed down due to the interaction of ketones and benzene compounds. The hydrolysis of sludge and PETMPs was accelerated, while the hydrolyzed products such as terephthalic acid were oxidized without interfering with each other. No obvious MPs remained in the effluent, and volatile fatty acids (VFAs) were the main components, among which acetic acid accounted for 90%. When the sludge was treated with PEMPs, PSMPs, or PETMPs, the concentration of acetic acid finally accounted for 45%, 21%, and 18% of DOC. Overall, MPs can be degraded or even mineralized during sludge WAO, and humic acid derivatives, acetate, and other small molecules of alcohols, ketones, or aldehydes were the typical intermediates.