Abundance, characterization, and removal of microplastics in different technology-based sewage treatment plants discharging into the middle stretch of the Ganga River, India

Sewage treatment plants (STPs) are considered as a prominent source for releasing microplastics (MPs) into the riverine systems. Though MPs abundance and removal efficacy in different secondary treatment technique-based STPs have been extensively studied worldwide, such studies are scarce in Indian conditions. Herein, this study comprehensively assesses MPs abundance, characterization, and their removal in the selected secondary treatment technique-based STPs discharging into the middle stretch of the Ganga River in India. MPs concentration (n/L) in influent and effluent of the STPs varied between 42 ± 10 to 150 ± 19 and 3 ± 1 to 22 ± 5, respectively. Overall, the primary treatment stage was observed to remove MPs by 23-42 %, while the secondary treatment stage removed MPs by 67-90 %. Selected technique-based STPs exhibited varying MPs removal efficacies as follows: SBR (94 %), TF (90 %), AL (88 %), UASB (87 %), ASP (85 %), FAB (84 %), and Bio-tower (77 %). MPs ranging from 50 to 250 μm were the dominant sizes, with PP, PE, and PS being the prevalent polymers. The Ganga River receives about 3 × 10 MPs/day from STP effluents, and an estimated 4.5 × 10 MPs/day are released via the sludge. This comprehensive assessment of MPs abundance and removal from different technology-based Indian STPs will allow the comparison of the generated dataset with similar studies worldwide.