We can't find the internet
Attempting to reconnect
Something went wrong!
Hang in there while we get back on track
From cracks to secondary microplastics - surface characterization of polyethylene terephthalate (PET) during weathering
AI summary Read the abstract
Scientists tracked how PET plastic, the material used in water bottles and clothing, develops cracks and eventually breaks into microplastics during exposure to UV light and water. Different forms of PET broke down in different ways and at different speeds, with water-submerged samples showing organized crack networks within 30 days. The study helps explain how everyday plastic products fragment into the microplastics found throughout the environment, with fibers being one of the most common shapes produced.
Secondary microplastics are a product of the fragmentation of plastic debris. Despite concerns regarding the omnipresence of microplastics in the environment, knowledge about the mechanics of their actual formation is still limited. Fragmentation is usually linked to weathering, which alters the properties of the plastic and allows fragmentation to occur. Therefore, in this study, polyethylene terephthalate (PET) samples were exposed to artificial UV light or a combination of UV light and water for a total of three months to simulate natural weathering. The samples included three forms of PET with different production histories: pellets, yarns, and films. The surface alterations to the samples during weathering were characterized using scanning electron microscopy and Raman spectroscopy. Results indicated that the three different types of PET developed markedly different surface defects and also exhibited signs of weathering within different time frames. Differences were also found between samples exposed only to UV and those exposed to UV and submerged in water. In water, the first surface changes were spotted within 30 days of initial submersion and later developed into an organized crack network. Upon the introduction of mild mechanical forces, pieces of the weathered surface started to delaminate. The fragments from films had an elongated shape with a median size of 16.1 × 2.1 × 1.8 μm, resembling a fibre. If the weathered surface of a film were to detach completely, it could create 1.4-7.9 million microplastic fragments/cm2. For pellets, this number would range between 0.4 and 2.2 million microplastics/cm2. In addition to particle formation by surface delamination, particles also emerged on the weathered surfaces of all studied samples, presenting another possible source of micro-sized particles during weathering. Overall, the results of this work show that the weathering of plastics and the formation of microplastics are heavily influenced not only by the weathering mechanism but also by the type and production history of the polymers.
More Papers Like This
Photo-induced degradation of single-use polyethylene terephthalate microplastics under laboratory and outdoor environmental conditions
AI summary Read the abstract
Researchers tested how sunlight, water, and physical wear work together to break down PET microplastics, the type commonly found in plastic bottles and food packaging. Over 60 days, combined UV light and water exposure caused significant chemical degradation of the plastic surfaces. This matters because as microplastics break down in the environment, they release smaller fragments and potentially harmful chemicals that are easier for organisms to absorb.
Impact of hydrolytic degradation on mechanical properties of PET - Towards an understanding of microplastics formation
AI summary Read the abstract
Scientists studied how PET plastic (used in water bottles) breaks down when exposed to hot water over time, discovering that the plastic becomes brittle and cracks apart once its molecular chains get cut short enough, and once that happens, it takes very little force to shatter into tiny pieces. This research helps explain how large plastic waste in oceans breaks down into microplastics, which is a key step toward predicting and eventually reducing the tiny plastic particles that end up in our water, food, and bodies.
Influence of weathering on the microplastics formation in the environment
AI summary Read the abstract
Researchers simulated UV weathering of polypropylene plastic and tracked how exposure progressively degraded the polymer, causing surface cracking and changes in mechanical properties that facilitate breakdown into microplastics. The results help explain how environmental weathering of plastic waste accelerates microplastic formation.
Changes in the Chemical Composition of Polyethylene Terephthalate under UV Radiation in Various Environmental Conditions.
AI summary Read the abstract
Researchers exposed polyethylene terephthalate (PET) to UV radiation under controlled humidity conditions and tracked changes in its chemical composition, finding progressive oxidation and chain scission that alter the polymer's surface properties. Understanding how PET degrades under UV exposure is important for predicting how PET microplastics form and what chemical changes make them more or less bioavailable.
Investigating the Physicochemical Property Changes of Plastic Packaging Exposed to UV Irradiation and Different Aqueous Environments
AI summary Read the abstract
Researchers investigated UV-driven degradation of polypropylene and PET packaging materials under different aqueous conditions, finding that UV exposure caused significant physicochemical changes including increased crystallinity and surface cracking that contribute to microplastic formation.
Research digests by email
When a large batch of papers lands in the Atlas, we read through it and send a short write-up of what stood out.